Hi I have cudy wr3000s, I modified master branch source code according gpl firmware from cudy but i don't know how to enter uboot menu in serial console?

Ok pushed pull request https://github.com/openwrt/openwrt/pull/16939

Ok i find it (reset press and power on). now i am on the uboot menu. Ok i will try my kernel a\nd then if its work i will create patch

@frollic @CHKDSK88 any suggestion how to test build ? Currently i will use this device as router without turning on wifi so if you have any suggestion to test wifi or any other before i create patch i will try to do it.

boot an initramfs using tftpboot or bootm in boot loader. once booted, make backups of all partitions. after that you can attempt to flash your device with the image you created.

That i already have it and running. I am more curious what other thing to test when i have running openwrt build. I already done sysupgrade and i have running my kernel and now i am preparing to test it in router modewithout wifi.

https://openwrt.org/docs/guide-developer/adding_new_device https://openwrt.org/docs/guide-developer/add.new.device

Any chance of submitting this to Cudy to get it signed so normal users dont need to serial to upgrade to openwrt?

until it's merged, "normal users" will have to compile their own images, to get WR3000s support. the compiling is probably a bigger obstacle, than serial.

I don't know, but i think first need to be merged and then we can contact cudy support with image

Do you know how log took to start review new device pull request ?

Hi, I can see the sysupgrade image on firmware selector 24.10 rc2

OpenWrt Forum

Support Cudy wr3000s

For Developers

sammo December 18, 2024, 10:01am 19

Thank you for all you hardwork