[SOLVED] IOT VLAN setup with downstream(?) switch with server access [SOLVED]

That should do it. Try it out. Don't forget to restart your router if you haven't already done so.

Required a reboot of the camera but it works!

Thanks for all the help! I have a much better understanding of this now.

Great!!

If your problem is solved, please consider marking this topic as [Solved]. See How to mark a topic as [Solved] for a short how-to.
Thanks! :slight_smile:

Solution Summary:

  1. Follow the Guest Wifi walkthrough found in this thread.
    a. I took the libery to use different names though.
    b. don't put underscores in names.
  2. If you don't want IOT devices to access the internet, remove WAN from the forwarding of the new firewall zone.
  3. Add bridge vlan configurations. There are 4 config blocks in the comment for this.
  4. Configure the switch.
    a. one of the parts I was missing here was what to set to tagged or untagged. Pay attention to the details here.
  5. Reboot the router and your devices.
1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.