[Solved] Can't install on TL-WR842ND v1

Installing and Using OpenWrt
1

UPDATE:
It works! Sorry, I had another router on 192.168.1.1 :crazy_face:

Hi!
Sorry if this is a total beginners question but I'm desperately trying to install OpenWRT/LEDE on my TL-WR842ND v1.
I tried both OpenWRT 15.05.1 (openwrt-15.05.1-ar71xx-generic-tl-wr842n-v1-squashfs-factory.bin) and LEDE (lede-17.01.4-ar71xx-generic-tl-wr842n-v1-squashfs-factory.bin). It flashes successfully from the stock TP-Link web interface but after rebooting it goes into an error state (gear icon LED flashes and then stays lit and I can't access anything).
Recovery via tftp succeeds but than I'm back to the stock firmware.
Is there anything I missed or do you know what's going on here?

Thank you!
Jaykob

2

I`d done it from Stock UI only from old IExplorer
openwrt-21.02.1-ath79-generic-tplink_tl-wr842n-v1-squashfs-factory.bin
In chrome update form did not works well!

3

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.