[Solved] After flashing OpenWrt slow speeds [Solved]

[anon65312312]

Hi, so after I installed OpenWrt on my XR500 with this firmware 22.03.0-rc6 (r19590-042d558536) I noticed that my download speeds are more than halfed! From 930Mbps to ~300Mbps. I have leaved everything on default so far. My setup looks like this. Cable Modem/Router -> XR500 -> PC. With stock firmware I got full speeds even with qos. Can I get this solved?

[slh]

Bandwidth Issues on Zyxel NGB6817

For using OpenWrt, the ipq806x target isn't quite capable to route at 1 GBit/s linespeed - it should do more than 100 MBit/s (depending on your expectations for latencies probably between 350-400 MBit/s up to ~600-650 MBit/s, with software flow-offloading enabled), but 1 GBit/s is a bit above its abilities (you would need mvebu or x86_64 for that, perhaps ipq8074 in the future). Especially with 1+ GBit/s fibre connections, you're quickly leaving the prosumer space and are fairly far into enterpr…

So you have 500Mbps-1Gbps fiber and need a router READ THIS FIRST

It's such a frequently asked question over the last few years that we really need a post we can point people to. So your cable company rolled out 500Mbps or 1Gbps download speeds, or you have 1Gbps symmetric fiber (GPON/EPON) from ATT or Centurylink or Orange or whoever. You realize your old all in one router from 2009 is not up to the task of handling this, but hey by now stuff should be cheap and available that will handle your new fiber connection right? So you want advice about a router for…

[anon65312312]

Hey, after enabling software and hardware offloading and disabling ipv6 I achive speeds up to 600-800Mbps.

[samin]

hey,Im absolutely beginner at this. can you tell me
how to disable ipv6?