I've got 4 IPQ5018 devices in my hand but have issues compiling and put all dtb and stuff in place.
The codename/model number is "MP03.5-C1"
And they is OpenWRT Chaos in there and pullabøe for info, but for today not supported in OpenWRT officially.
I will get on this thread from my computer tomorrow ©
There's some IPQ5018 work being done in IPQ5018: Potential future support for Linksys MX2000 Atlas 6 & MX5500 Atlas 6 Pro
cmdline:
console=ttyMSM0,115200n8 cnss2.bdf_integrated=0x24 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0x60 cnss2.skip_radio_bmap=4 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M
root@U300:/proc# cat /proc/mtd
dev: size erasesize name
mtd0: 00030000 00001000 "0:SBL1"
mtd1: 00010000 00001000 "0:MIBIB"
mtd2: 00010000 00001000 "0:BOOTCONFIG"
mtd3: 00010000 00001000 "0:BOOTCONFIG1"
mtd4: 000a0000 00001000 "0:QSEE_1"
mtd5: 000a0000 00001000 "0:QSEE"
mtd6: 00010000 00001000 "0:DEVCFG_1"
mtd7: 00010000 00001000 "0:DEVCFG"
mtd8: 00010000 00001000 "0:CDT_1"
mtd9: 00010000 00001000 "0:CDT"
mtd10: 00010000 00001000 "0:APPSBLENV"
mtd11: 000a0000 00001000 "0:APPSBL_1"
mtd12: 000a0000 00001000 "0:APPSBL"
mtd13: 00070000 00001000 "0:ART"
mtd14: 00080000 00020000 "0:TRAINING"
mtd15: 03e00000 00020000 "rootfs"
mtd16: 03e00000 00020000 "rootfs_1"
mtd17: 00450034 0001f000 "kernel"
mtd18: 00387000 0001f000 "wifi_fw"
mtd19: 00005000 0001f000 "bt_fw"
mtd20: 01512000 0001f000 "ubi_rootfs"
mtd21: 0179d000 0001f000 "rootfs_data"
root@U300:/proc# cat /proc/mounts
mtd:ubi_rootfs /rom squashfs ro,relatime 0 0
proc /proc proc rw,nosuid,nodev,noexec,noatime 0 0
sysfs /sys sysfs rw,nosuid,nodev,noexec,noatime 0 0
cgroup /sys/fs/cgroup cgroup rw,nosuid,nodev,noexec,relatime,cpuset,cpu,cpuacct,blkio,memory,devices,freezer,net_cls,pids 0 0
tmpfs /tmp tmpfs rw,nosuid,nodev,noatime 0 0
/dev/ubi0_4 /overlay ubifs rw,noatime 0 0
overlayfs:/overlay / overlay rw,noatime,lowerdir=/,upperdir=/overlay/upper,workdir=/overlay/work 0 0
tmpfs /dev tmpfs rw,nosuid,relatime,size=512k,mode=755 0 0
devpts /dev/pts devpts rw,nosuid,noexec,relatime,mode=600,ptmxmode=000 0 0
/dev/mtdblock18 /lib/firmware/IPQ5018/WIFI_FW squashfs ro,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,noatime 0 0
Board Model ==> Qualcomm Technologies, Inc. IPQ5018/AP-MP03.5-C1,
SOC Version ==> 1.1,
NAND configuration ==> 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 128,
Kernel Version ==> Linux version 4.4.60 (csy@chenshengye@usr.cn) (gcc version 5.2.0 (OpenWrt GCC 5.2.0 112ebd2+r49254) ) #414 SMP PREEMPT Fri Feb 2 19:57:00 CST 2024,
Boot Version ==> CRM-BOOT.BF.3.3.1.1-00067,
Tz Version ==> CRM-TZ.WNS.4.0-00107,
NHSS Version ==> 112249254,
WCSS Version ==> WLAN.HK.2.6-02451-QCAHKSWPL_SILICONZ-1 v1,
CPU Cores Online ==> 0,1,
CPU Scaling Governor: 0 ==> userspace,
CPU Current Frequency: 0 ==> 1008000,
CPU Available frequencies: 0 ==> 800000 1008000 ,
NSS Current frequency ==> 850000000,
NSS Available frequencies ==> 850000000 Hz 1000000000 Hz ,
Getting CPU utilization...
CPU Utilization: all ==> Used: 6.95% Idle: 92.33%,
CPU Utilization: 0 ==> Used: 8.79% Idle: 90.59%,
CPU Utilization: 1 ==> Used: 5.11% Idle: 94.07%,
Total Memory ==> 402312 kB,
Free Memory ==> 169860 kB,
Available Memory ==> 198620 kB,
Reserved Memory: ==> Start 0x4AB00000; End 0x50400000; Size 0x5900000,
APSS Wdog status ==> "running",,
APSS Wdog timeout ==> 30,,
Wan Interface ==> ,
Wan device IP ==> 127.0.0.1,192.168.1.100,
Wan device MAC ==> 02:50:f4:00:00:01,d4:ad:20:6a:97:b0,d4:ad:20:6a:97:b1,be:34:19:4a:ce:67,ee:46:74:6d:50:a2,00:00:00:00:00:00,fa:03:e3:b1:62:c7,d4:ad:20:6a:97:b1,d4:ad:20:6a:97:b2,d4:ad:20:6a:97:b3,
SMMU Status ==> DISABLED,
XPU Status ==> [001e59af8]xPUAC Enabled,
cat: can't open '/sys/kernel/debug/msm_ipc_router/dump_xprt_info': No such file or directory
JTAG ID ==> 0x101540E1,
Kernel Command line ==> console=ttyMSM0,115200n8 cnss2.bdf_integrated=0x24 cnss2.bdf_pci0=0x60 cnss2.bdf_pci1=0x60 cnss2.skip_radio_bmap=4 ubi.mtd=rootfs root=mtd:ubi_rootfs rootfstype=squashfs rootwait swiotlb=1 coherent_pool=2M,
Crash magic ==> 0x00000000,
tmpfs Size ==> tmpfs 196.4M 1.2M 195.2M 1% /tmp,
Overlay Size ==> /dev/ubi0_4 20.0M 476.0K 18.5M 2% /overlay,
Running teardown...
Warnings: 1
No output found for NAND Part No.
No entry found for RPM version
No status found for Q6-Node ID 0x00000007
Teardown completed
This Board is the same as in GL.inet Marble 3000B
They have an underlying Openwrt 19.X
Maybe the Firmware from GL.inet helps
But it would be interesting, if 24.10 could be adopted to this.
As i am a beginner i don't know how. Maybe someone can Help me
it probably doesn't.
it won't, the release after 24.10, at best, if someone puts in the time required to get it to work.
