Hello again.
Hello, i fucked up.
What have i done:
bought TP Link RE650 v2
Installed OpenWRT
to dump to make simple things.
flash OEM firmware - Without using Firmwareconverter....
can´t boot anymore
bougt UART-TTL USB Converter
soldert TXDGND/RXD on board an connectet viceversa to the USB.
startet Putty (Serial, COM4, 57600, 8:1)
finding the TP LInk in BootLoop:
===================================================================
MT7621 stage1 code done
…
I followed this post. it seemed fine, but after loading kernal image,
It just stooped on here... nothing changes.
no blinking, no progress.
When I reboot by unplug, it blink just one time, and stopped working again.
I have to choose option before it stops.
I found v1 kernel images on here -https://downloads.openwrt.org/snapshots/targets/ramips/mt7621/
should I try with different image or another option?
I have those three files.
MT7621 # printenv
bootcmd=tftp
bootdelay=1
baudrate=57600
ethaddr="00:AA:BB:CC:DD:10"
autostart=no
bootfile=um_factory_fw.bin
stdin=serial
stdout=serial
stderr=serial
filesize=560e00
fileaddr=80200000
ipaddr=192.168.0.254
serverip=192.168.0.1
Environment size: 225/4092 bytes
This is the current information
Fugt41
February 3, 2024, 6:47am
2
Please Tell me you didn't follows the First Post in your Link Button the solution instead: RE650 flash via Putty - #12 by Fugt41
In my behalf IT only worked in the second Laptop. I cant,t Help more than that.
Good Luck.
I didn't. I followed 'the solved' thread.
system
February 15, 2024, 1:29am
5
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.
