Hi !
Thanks Openwrt community for all work done. It's amazing !
I got a hexS on 22.03.0-rc4
i got bad perf with SFP and messages like this :
sfp module is :
module: /lib/modules/5.10.120/sfp.ko
license: GPL v2
alias: platform:sfp
depends: mdio-i2c,hwmon
intree: Y
name: sfp
vermagic: 5.10.120 SMP mod_unload MIPS32_R2 32BIT
typically dmesg says :
[ 10.452474] sfp sfp1: Host maximum power 1.0W
[ 10.558515] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 12.053642] sfp sfp1: please wait, module slow to respond
[ 18.684233] mtk_soc_eth 1e100000.ethernet sfp: PHY [mdio-bus:07] driver [Qualcomm Atheros AR8031/AR8033] (irq=POLL)
[ 18.694788] mtk_soc_eth 1e100000.ethernet sfp: configuring for phy/rgmii-rxid link mode
[ 18.703543] at803x_config_aneg: fiber
[ 27.653606] sfp sfp1: module FS GPON-ONU-34-20BI rev 01 sn XXXXXXXXXXX dc XXXXXX
[ 27.663008] Qualcomm Atheros AR8031/AR8033 mdio-bus:07: SFP interface 1000base-x
[ 38.453770] mtk_soc_eth 1e100000.ethernet sfp: Link is Up - 1Gbps/Full - flow control off
[ 38.461980] IPv6: ADDRCONF(NETDEV_CHANGE): sfp: link becomes ready
[ 38.468822] IPv6: ADDRCONF(NETDEV_CHANGE): sfp.832: link becomes ready
[ 242.612130] sfp sfp1: failed to read SFP soft status: -6
[ 504.873404] sfp sfp1: module transmit fault indicated
[ 506.203408] sfp sfp1: module transmit fault recovered
[ 811.944834] sfp sfp1: failed to read SFP soft status: -6
Do someone have a hint to help me digging ?
Thanks 