Hi, I want to configure my Raspberry as an Access Point VPN to connect to the internet through my VPN. I connected my Raspberry Pi to the router via a LAN cable, installed OpenVPN and configured my VPN provider (NordVPN) following a tutorial they leave on their website. https://nordvpn.com/es/tutor…

Set up a separate network called vpnuser. This network is like a guest network. It must have its own firewall zone. This network has a DHCP server. When users connect to the AP, they will receive a local IP address. Also create a firewall zone for the VPN tunnel. Enable masquerade on that zone…

It would be much simpler if you convert AP to router: https://openwrt.org/docs/guide-user/network/openwrt_as_routerdevice

There is nothing WAN specific in that tutorial. Follow the steps as written for a functioning VPN.

[image] vgaetera: It would be much simpler if you convert AP to router. How do I do this?

OpenWrt as router device OpenWrt as router device See also: Router vs switch vs gateway and NAT, OpenWrt as client device If your device has some ports labeled LAN and at least a port labeled WAN and you want it to operate as a router (a connection between two different... …

I'm sorry for my questions, but I don't know about networks. How can I do steps two and three?

network.loopback=interface network.loopback.ifname='lo' network.loopback.proto='static' network.loopback.ipaddr='127.0.0.1' network.loopback.netmask='255.0.0.0' network.globals=globals network.globals.ula_prefix='fda8:f540:0bef::/48' network.lan=interface network.lan.type='bridge' network.lan.ifname…

I am interested in the topic. I have configured the vpn. How can I Make to place the wlan like AP , redirect all the traffic through the vpn? The router is connected by wire

Put the VPN as default gateway for the clients, in the DHCP, or intercept all (or some) traffic in the fw of the router, and reroute it through the tunnel.

thank you, but the problem is if I bridge the wireless with the vpn, the tun0 interface does not assign ip to the client. I do not know as to do it.

Raspberry Pi Access Point VPN

Installing and Using OpenWrt Network and Wireless Configuration

jlortizfuentes September 23, 2019, 9:03pm 4

How do I do this?