Hi
I have installed OpenWrt for raspberry pi 3 B+ from the development builds images,configured and installed luci interface, however I can't get wifi up,any advise or guidance will be greatly appreciated
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r8165-3fa7e62
-----------------------------------------------------
root@OpenWrt:~# cat /etc/config/network
config interface 'loopback'
option ifname 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fdd0:8347:7780::/48'
config interface 'lan'
option type 'bridge'
option ifname 'eth0'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
config interface 'wan'
option proto 'dhcp'
option ifname 'eth1'
option force_link '1'
root@OpenWrt:~# cat /etc/config/wireless
root@OpenWrt:~# uci show wireless
root@OpenWrt:~# wifi
root@OpenWrt:~# wifi up
root@OpenWrt:~# wifi status
{
}
root@OpenWrt:~# iw reg get
global
country 00: DFS-UNSET
(2402 - 2472 @ 40), (N/A, 20), (N/A)
(2457 - 2482 @ 20), (N/A, 20), (N/A), AUTO-BW, PASSIVE-SCAN
(2474 - 2494 @ 20), (N/A, 20), (N/A), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 80), (N/A, 20), (N/A), AUTO-BW
(5250 - 5330 @ 80), (N/A, 20), (0 ms), DFS, AUTO-BW, PASSIVE-SCAN
(5490 - 5730 @ 160), (N/A, 20), (0 ms), DFS, PASSIVE-SCAN
(5735 - 5835 @ 80), (N/A, 20), (N/A), PASSIVE-SCAN
(57240 - 63720 @ 2160), (N/A, 0), (N/A)
root@OpenWrt:~# rm -f /etc/config/wireless
root@OpenWrt:~# wifi
root@OpenWrt:~# wifi status
{
}
root@OpenWrt:~#
dmesg
root@OpenWrt:~# dmesg
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.9.129 (buildbot@crazyhorse) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8123-dee8804) ) #0 SMP Wed Sep 26 22:22:13 2018
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] cma: Reserved 16 MiB at 0x000000003a400000
[ 0.000000] On node 0 totalpages: 242688
[ 0.000000] DMA zone: 3792 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 242688 pages, LIFO batch:31
[ 0.000000] percpu: Embedded 20 pages/cpu @ffffffc03a386000 s44056 r8192 d29672 u81920
[ 0.000000] pcpu-alloc: s44056 r8192 d29672 u81920 alloc=20*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 238896
[ 0.000000] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 dwc_otg.lpm_enable=0 console=ttyS0,115200 kgdboc=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootfstype=squashfs,ext4 rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000000] Memory: 928864K/970752K available (4606K kernel code, 278K rwdata, 1448K rodata, 320K init, 325K bss, 25504K reserved, 16384K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008500000 ( 4608 KB)
[ 0.000000] .rodata : 0xffffff8008500000 - 0xffffff8008670000 ( 1472 KB)
[ 0.000000] .init : 0xffffff8008670000 - 0xffffff80086c0000 ( 320 KB)
[ 0.000000] .data : 0xffffff80086c0000 - 0xffffff8008705808 ( 279 KB)
[ 0.000000] .bss : 0xffffff8008705808 - 0xffffff8008756cf4 ( 326 KB)
[ 0.000000] fixed : 0xffffffbefe7fb000 - 0xffffffbefec00000 ( 4116 KB)
[ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
[ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
[ 0.000000] 0xffffffbf00000000 - 0xffffffbf00ed0000 ( 14 MB actual)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc03b400000 ( 948 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] CONFIG_RCU_FANOUT set to non-default value of 32
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000206] Console: colour dummy device 80x25
[ 0.000915] console [tty1] enabled
[ 0.000952] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000998] pid_max: default: 32768 minimum: 301
[ 0.001115] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.001145] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.002032] ASID allocator initialised with 32768 entries
[ 0.003457] Detected VIPT I-cache on CPU1
[ 0.003506] CPU1: Booted secondary processor [410fd034]
[ 0.003960] Detected VIPT I-cache on CPU2
[ 0.003993] CPU2: Booted secondary processor [410fd034]
[ 0.004431] Detected VIPT I-cache on CPU3
[ 0.004464] CPU3: Booted secondary processor [410fd034]
[ 0.004538] Brought up 4 CPUs
[ 0.004675] SMP: Total of 4 processors activated.
[ 0.004702] CPU features: detected feature: 32-bit EL0 Support
[ 0.004727] CPU features: detected feature: Kernel page table isolation (KPTI)
[ 0.006147] CPU: All CPU(s) started at EL2
[ 0.006186] alternatives: patching kernel code
[ 0.017819] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.017881] futex hash table entries: 1024 (order: 5, 131072 bytes)
[ 0.018644] pinctrl core: initialized pinctrl subsystem
[ 0.019616] NET: Registered protocol family 16
[ 0.049908] cpuidle: using governor ladder
[ 0.079927] cpuidle: using governor menu
[ 0.080146] vdso: 2 pages (1 code @ ffffff8008505000, 1 data @ ffffff80086c4000)
[ 0.081081] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.081160] Serial: AMBA PL011 UART driver
[ 0.084453] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.084904] uart-pl011 3f201000.serial: could not find pctldev for node /soc/gpio@7e200000/uart0_pins, deferring probe
[ 0.140832] bcm2835-dma 3f007000.dma: DMA legacy API manager at ffffff800804f000, dmachans=0x1
[ 0.142859] SCSI subsystem initialized
[ 0.143134] usbcore: registered new interface driver usbfs
[ 0.143220] usbcore: registered new interface driver hub
[ 0.143298] usbcore: registered new device driver usb
[ 0.150030] raspberrypi-firmware soc:firmware: Attached to firmware from 2018-05-11 10:20
[ 0.151152] clocksource: Switched to clocksource arch_sys_counter
[ 0.158011] NET: Registered protocol family 2
[ 0.158628] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.158760] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
[ 0.158970] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.159139] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159200] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.159405] NET: Registered protocol family 1
[ 0.160890] Crashlog allocated RAM at address 0x3f00000
[ 0.161226] workingset: timestamp_bits=62 max_order=18 bucket_order=0
[ 0.169434] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.170912] io scheduler noop registered
[ 0.170939] io scheduler deadline registered
[ 0.171107] io scheduler cfq registered (default)
[ 0.175466] BCM2708FB: allocated DMA memory fa440000
[ 0.175514] BCM2708FB: allocated DMA channel 0 @ ffffff800804f000
[ 0.182596] Console: switching to colour frame buffer device 82x26
[ 0.186947] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[ 0.189439] console [ttyS0] disabled
[ 0.191203] 3f215040.serial: ttyS0 at MMIO 0x0 (irq = 61, base_baud = 31250000) is a 16550
[ 0.764855] console [ttyS0] enabled
[ 0.770703] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 0.782833] Unable to detect cache hierarchy for CPU 0
[ 0.801008] brd: module loaded
[ 0.812338] loop: module loaded
[ 0.817571] libphy: Fixed MDIO Bus: probed
[ 0.823476] usbcore: registered new interface driver lan78xx
[ 0.830947] usbcore: registered new interface driver smsc95xx
[ 0.838400] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.073834] Core Release: 2.80a
[ 1.078569] Setting default values for core params
[ 1.085055] Finished setting default values for core params
[ 1.292652] Using Buffer DMA mode
[ 1.297630] Periodic Transfer Interrupt Enhancement - disabled
[ 1.305246] Multiprocessor Interrupt Enhancement - disabled
[ 1.312592] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 1.318663] Dedicated Tx FIFOs mode
[ 1.324296] WARN::dwc_otg_hcd_init:1053: FIQ DMA bounce buffers: virt = 0x087e4000 dma = 0xfa454000 len=9024
[ 1.337581] FIQ FSM acceleration enabled for :
[ 1.337581] Non-periodic Split Transactions
[ 1.337581] Periodic Split Transactions
[ 1.337581] High-Speed Isochronous Endpoints
[ 1.337581] Interrupt/Control Split Transaction hack enabled
[ 1.367945] dwc_otg: Microframe scheduler enabled
[ 1.368015] WARN::hcd_init_fiq:486: MPHI regs_base at 0x08078000
[ 1.375750] dwc_otg 3f980000.usb: DWC OTG Controller
[ 1.382404] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 1.391471] dwc_otg 3f980000.usb: irq 15, io mem 0x00000000
[ 1.398790] Init: Port Power? op_state=1
[ 1.404372] Init: Power Port (0)
[ 1.409377] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.417919] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.426893] usb usb1: Product: DWC OTG Controller
[ 1.433282] usb usb1: Manufacturer: Linux 4.9.129 dwc_otg_hcd
[ 1.440716] usb usb1: SerialNumber: 3f980000.usb
[ 1.447521] hub 1-0:1.0: USB hub found
[ 1.452908] hub 1-0:1.0: 1 port detected
[ 1.458903] dwc_otg: FIQ enabled
[ 1.458906] dwc_otg: NAK holdoff enabled
[ 1.458910] dwc_otg: FIQ split-transaction FSM enabled
[ 1.458920] Module dwc_common_port init
[ 1.459081] usbcore: registered new interface driver uas
[ 1.466097] usbcore: registered new interface driver usb-storage
[ 1.473759] mousedev: PS/2 mouse device common for all mice
[ 1.481269] bcm2835-wdt 3f100000.watchdog: Broadcom BCM2835 watchdog timer
[ 1.489975] bcm2835-cpufreq: min=600000 max=1400000
[ 1.496829] sdhci: Secure Digital Host Controller Interface driver
[ 1.504691] sdhci: Copyright(c) Pierre Ossman
[ 1.511041] sdhost: log_buf @ ffffff800807e000 (fa453000)
[ 1.591147] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 1.599385] mmc-bcm2835 3f300000.mmc: mmc_debug:0 mmc_debug2:0
[ 1.605982] mmc-bcm2835 3f300000.mmc: DMA channel allocated
[ 1.671195] Indeed it is in host mode hprt0 = 00021501
[ 1.691173] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.699964] NET: Registered protocol family 10
[ 1.706762] NET: Registered protocol family 17
[ 1.711945] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
[ 1.726453] 8021q: 802.1Q VLAN Support v1.8
[ 1.737045] 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 72, base_baud = 0) is a PL011 rev2
[ 1.747816] of_cfs_init
[ 1.751075] of_cfs_init: OK
[ 1.755100] Waiting for root device /dev/mmcblk0p2...
[ 1.769496] mmc0: host does not support reading read-only switch, assuming write-enable
[ 1.780275] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.787656] mmc0: new high speed SDHC card at address e624
[ 1.794285] mmcblk0: mmc0:e624 SU04G 3.69 GiB
[ 1.799668] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.807456] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.807503] random: fast init done
[ 1.817964] mmcblk0: p1 p2
[ 1.824273] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.871152] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.878552] Indeed it is in host mode hprt0 = 00001101
[ 1.885265] VFS: Mounted root (squashfs filesystem) readonly on device 179:2.
[ 1.893529] Freeing unused kernel memory: 320K
[ 1.911956] mmc1: new high speed SDIO card at address 0001
[ 2.069847] init: Console is alive
[ 2.074174] init: - watchdog -
[ 2.124382] usb 1-1: New USB device found, idVendor=0424, idProduct=2514
[ 2.131985] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.142483] hub 1-1:1.0: USB hub found
[ 2.169323] hub 1-1:1.0: 4 ports detected
[ 2.352238] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 2.417346] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 2.431201] init: - preinit -
[ 2.491201] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.621523] usb 1-1.1: New USB device found, idVendor=0424, idProduct=2514
[ 2.630227] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.640196] hub 1-1.1:1.0: USB hub found
[ 2.646030] hub 1-1.1:1.0: 3 ports detected
[ 2.690239] random: procd: uninitialized urandom read (4 bytes read)
[ 2.751230] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
[ 2.894164] usb 1-1.2: New USB device found, idVendor=0b95, idProduct=7720
[ 2.903014] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.912260] usb 1-1.2: Product: AX88x72A
[ 2.917986] usb 1-1.2: Manufacturer: ASIX Elec. Corp.
[ 2.924905] usb 1-1.2: SerialNumber: 0003AE
[ 3.125170] random: crng init done
[ 3.401171] usb 1-1.1.1: new high-speed USB device number 5 using dwc_otg
[ 3.531617] usb 1-1.1.1: New USB device found, idVendor=0424, idProduct=7800
[ 3.540588] usb 1-1.1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.828919] libphy: lan78xx-mdiobus: probed
[ 7.275896] mount_root: switching to f2fs overlay
[ 7.334631] urandom-seed: Seeding with /etc/urandom.seed
[ 7.435088] procd: - early -
[ 7.439794] procd: - watchdog -
[ 8.105169] procd: - watchdog -
[ 8.110186] procd: - ubus -
[ 8.166029] procd: - init -
[ 8.366627] kmodloader: loading kernel modules from /etc/modules.d/*
[ 8.390316] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 8.403549] hidraw: raw HID events driver (C) Jiri Kosina
[ 8.869970] asix 1-1.2:1.0 eth1: register 'asix' at usb-3f980000.usb-1.2, ASIX AX88772 USB 2.0 Ethernet, 8c:ae:4c:f9:e0:1c
[ 8.884512] usbcore: registered new interface driver asix
[ 8.892753] usbcore: registered new interface driver ax88179_178a
[ 8.902647] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85
[ 8.913576] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd
[ 8.924383] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 8.937493] nf_conntrack version 0.5.0 (7680 buckets, 30720 max)
[ 8.964605] usbcore: registered new interface driver usbhid
[ 8.971964] usbhid: USB HID core driver
[ 8.983451] xt_time: kernel timezone is -0000
[ 9.004297] PPP generic driver version 2.4.2
[ 9.011239] NET: Registered protocol family 24
[ 9.027704] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.294236] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 9.313015] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Mar 1 2015 07:29:38 version 7.45.18 (r538002) FWID 01-6a2c8ad4
[ 9.332597] ------------[ cut here ]------------
[ 9.338161] WARNING: CPU: 0 PID: 112 at backports-4.19-rc5-1/net/wireless/core.c:736 wiphy_register+0x23c/0x8c0 [cfg80211]
[ 9.351073] Modules linked in: brcmfmac(+) pppox ppp_generic nf_conntrack_ipv6 iptable_nat ipt_REJECT ipt_MASQUERADE cfg80211 xt_time xt_tcpudp xt_state xt_nat xt_multiport xt_mark xt_mac xt_limit xt_conntrack xt_comment xt_TCPMSS xt_REDIRECT xt_LOG xt_CT usbhid slhc nf_reject_ipv4 nf_nat_redirect nf_nat_masquerade_ipv4 nf_conntrack_ipv4 nf_nat_ipv4 nf_nat nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 nf_conntrack_rtcache nf_conntrack iptable_mangle iptable_filter ip_tables hid_generic crc_ccitt compat brcmutil ax88179_178a asix hid evdev ip6t_REJECT nf_reject_ipv6 nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables x_tables snd_pcm_dmaengine snd_compress snd_pcm_oss snd_mixer_oss snd_pcm snd_timer snd_rawmidi snd_seq_device snd_hwdep snd soundcore nls_utf8 vfat fat nls_iso8859_1 nls_cp437
[ 9.431880]
[ 9.435382] CPU: 0 PID: 112 Comm: kworker/0:2 Not tainted 4.9.129 #0
[ 9.442866] Hardware name: Raspberry Pi 3 Model B Plus Rev 1.3 (DT)
[ 9.450261] Workqueue: events request_firmware_work_func
[ 9.456652] task: ffffffc037cb0a80 task.stack: ffffffc038370000
[ 9.463649] PC is at wiphy_register+0x23c/0x8c0 [cfg80211]
[ 9.470208] LR is at brcmf_cfg80211_attach+0x938/0x1088 [brcmfmac]
[ 9.477448] pc : [<ffffff800069457c>] lr : [<ffffff800070b150>] pstate: 40000145
[ 9.486885] sp : ffffffc038373b10
[ 9.491178] x29: ffffffc038373b10 x28: ffffff8000722848
[ 9.497495] x27: ffffffc0383fa380 x26: 0000000000000002
[ 9.503778] x25: ffffffc03746e000 x24: ffffffc038373c20
[ 9.510026] x23: ffffff8008732a20 x22: ffffffc03746d900
[ 9.516248] x21: ffffffc0383fa39c x20: ffffffc03778bf00
[ 9.522436] x19: ffffffc03771e000 x18: 0000000000000000
[ 9.528597] x17: ffffff8008530144 x16: ffffff8008530144
[ 9.534733] x15: ffffff8008530144 x14: 000e09b400000000
[ 9.540826] x13: 0000000000000000 x12: 0000000000000000
[ 9.546896] x11: 0000000000000000 x10: 0000000000000000
[ 9.552921] x9 : 0000000000000000 x8 : 0000000000000000
[ 9.558902] x7 : 0000000000000000 x6 : ffffffc037b22b80
[ 9.564862] x5 : 0000000000000000 x4 : 0000000000000000
[ 9.570799] x3 : ffffff8000707c28 x2 : ffffffc03778cf8a
[ 9.576723] x1 : 000000000000070e x0 : ffffffc03778c300
[ 9.582629]
[ 9.584618] ---[ end trace 27b811a9c2eac30b ]---
[ 9.589796] Call trace:
[ 9.592734] Exception stack(0xffffffc038373930 to 0xffffffc038373a60)
[ 9.599746] 3920: ffffffc03771e000 0000007fffffffff
[ 9.608665] 3940: ffffffc038373b10 ffffff800069457c 0000000040000145 000000000000003d
[ 9.617677] 3960: ffffffc0383739c0 000000018020001f ffffffc0383fa880 000000018020001f
[ 9.626827] 3980: ffffffc038373990 ffffff800813acf4 ffffffc0383739c0 ffffff800813c318
[ 9.636098] 39a0: ffffffc0383fa880 ffffffc037760054 ffffffc0383739e0 ffffff8008111054
[ 9.645493] 39c0: 0000000000000003 ffffffc0383fa380 ffffffc0383739e0 ffffff8008123754
[ 9.655048] 39e0: ffffffc03778c300 000000000000070e ffffffc03778cf8a ffffff8000707c28
[ 9.664739] 3a00: 0000000000000000 0000000000000000 ffffffc037b22b80 0000000000000000
[ 9.674555] 3a20: 0000000000000000 0000000000000000 0000000000000000 0000000000000000
[ 9.684444] 3a40: 0000000000000000 0000000000000000 000e09b400000000 ffffff8008530144
[ 9.694451] [<ffffff800069457c>] wiphy_register+0x23c/0x8c0 [cfg80211]
[ 9.702137] [<ffffff800070b150>] brcmf_cfg80211_attach+0x938/0x1088 [brcmfmac]
[ 9.710537] [<ffffff80007138e8>] brcmf_attach+0x1b8/0xec0 [brcmfmac]
[ 9.718032] [<ffffff800071bf9c>] brcmf_sdio_wd_timer+0x4c4/0x2918 [brcmfmac]
[ 9.726216] [<ffffff80007145b8>] brcmf_attach+0xe88/0xec0 [brcmfmac]
[ 9.733658] [<ffffff800831a3dc>] request_firmware_work_func+0x34/0x60
[ 9.741178] [<ffffff80080a9c18>] process_one_work+0x208/0x350
[ 9.747953] [<ffffff80080a9ffc>] worker_thread+0x29c/0x4a8
[ 9.754444] [<ffffff80080af8bc>] kthread+0xdc/0xf0
[ 9.760202] [<ffffff8008082d30>] ret_from_fork+0x10/0x20
[ 9.766506] brcmfmac: brcmf_cfg80211_attach: Could not register wiphy device (-22)
[ 9.775938] brcmfmac: brcmf_bus_started: failed: -12
[ 9.781829] brcmfmac: brcmf_attach: dongle is not responding: err=-12
[ 9.841346] brcmfmac: brcmf_sdio_firmware_callback: brcmf_attach failed
[ 14.071488] usbcore: registered new interface driver brcmfmac
[ 14.081323] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 17.163839] lan78xx 1-1.1.1:1.0 eth0: kevent 4 may have been dropped
[ 17.174112] br-lan: port 1(eth0) entered blocking state
[ 17.180237] br-lan: port 1(eth0) entered disabled state
[ 17.186514] device eth0 entered promiscuous mode
[ 17.193332] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 17.206028] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 17.338615] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 17.348678] asix 1-1.2:1.0 eth1: link up, 100Mbps, full-duplex, lpa 0xC1E1
[ 20.541262] br-lan: port 1(eth0) entered blocking state
[ 20.548281] br-lan: port 1(eth0) entered forwarding state
[ 20.555602] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 49.018254] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 49.030386] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 49.044855] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 49.375356] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 49.387731] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 49.402405] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 60.386248] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 60.398888] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 60.413941] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 66.948766] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 66.961883] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 66.977312] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 91.381208] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 91.394590] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 91.410259] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 97.856170] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 97.869526] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 97.885044] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 158.816851] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 158.830206] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 158.845787] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 159.172248] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 159.185618] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 159.201245] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 159.529313] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 159.542679] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 159.558207] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 499.311196] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 499.324516] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 499.340050] cpufreq: __target_index: Failed to change cpu frequency: -22
[ 543.111195] bcm2835-cpufreq:bcm2835_cpufreq_set_clock:84: Failed to set clock: 1400000 (-12)
[ 543.124524] bcm2835-cpufreq:bcm2835_cpufreq_driver_target_index:183: Error occurred setting a new frequency (1400000)
[ 543.140055] cpufreq: __target_index: Failed to change cpu frequency: -22
root@OpenWrt:~#
