I put the MT6000 in AP mode and installed bridger for hw offload. I am still new to openwrt x86 but is this good for cake/layer_cake on an intel N100 connected directly to the fiber ONT (TDS Telecom)?
Please add link yo waveform result. And output of ubus call system board from all devices involved.
Yes, low digit ms results are good. You are also seeing an A+ from the page so I’m confused why you’re posting…
1 Like
I'm not sure you're asking a question or this is a humble brag lol. Yes, if your connection is rated at 1Gbps symmetrical then those are great results. Download could be a little higher maybe.
Try upgrading to 24.10.0-rc2, they moved to a tickless kernel for x86, you might get slightly better results on the N100 with it or at least some power savings.
Btw GL-MT6000 will do up to about 900Mbps with sqm cake (as with most Filogic 830 targets). N100 should do it without breaking a sweat.
I did not even know RC2 was out must have been recent cause i check every day. I want to check out that new kernel for sure. Also this is some more info about my internet source. https://radar.cloudflare.com/quality/as4181