Problem - Authentification WIFI

Installing and Using OpenWrt Network and Wireless Configuration
1

Hello,

I required assistance for configuration my wifi for get inside to my lan.
When i use public Access Point was working, but when i used the key WPA2-PSK is not work.
My WAN is connected to Wireless ISP (Livebox)

Devices

[ETHERNET]
Add new Device:
 - Device type		: Bridge device
 - Device name		: Bridge
 - Bridge ports		: Lan1-4
 - Bridge VLAN filtering:
   -  VLAN ID	LAN1	LAN2	LAN3	LAN4
   -  1		    t*	    u       u 		u
   -  2 		t		-		-		-

Router Trunk / Tagged: LAN1
Excluded: exsw because isn't work VLAN.

Interfaces:

[ETHERNET]
Name				: VLAN1
Protocol			: Static address
Switch port			: Bridge.1
Bring up on boot	: ON
IPv4 address		: 192.168.0.1/24

Name				: VLAN2
Protocol			: Static address
Switch port			: Bridge.2
Bring up on boot	: ON
IPv4 address		: 192.168.2.1/24

[WIFI] 
Name				: WIFI
Protocol			: Static address
Switch port			: WIFI
Bring up on boot	: ON
IPv4 address		: 192.168.50.0/24

image
image899×268 5.26 KB

image
image899×341 12.5 KB

image
image946×562 24 KB

image
image952×279 15.7 KB

When a try connected to wifi with Interfaces WIFI with DHCP

image
image946×150 5.94 KB

I'm not understand this : https://github.com/openwrt/openwrt/issues/10219

I'm french.

2

let's see your complete config in text form:

Please copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall