Port Forwarding correctly?

Installing and Using OpenWrt
1

Hi!

I am trying to learn how to forward a port correctly on my network to the WAN.

This is how my general firewall settings are set up:

bild
bild1258×918 64.3 KB

2

This is how my port forwarding is set up:

bild
bild1245×616 48.9 KB

4

This is what's on LAN:

bild
bild1233×806 86.4 KB

Am I doing anything wrong?

5

Do you have a public IP on your WAN port ?

6

Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button:
grafik
Remember to redact passwords, MAC addresses and any public IP addresses you may have:

ubus call system board
cat /etc/config/network
cat /etc/config/wireless
cat /etc/config/dhcp
cat /etc/config/firewall
7

This can be done automatically via upnp

8

The changes you did to the default policies (accept for input/ forward) are extremely dangerous and should be rectified immediately. I would further advise to reflash OpenWrt (not retaining any settings), to set new/ strong passwords and to audit the internal systems that might have gotten compromised.

3 Likes