Policy routing configuration I don't know help me pls

[geres]

What I would like to do is bypass the vpn with a device.

I have read this page 20 times but I don't know anything.
https://docs.openwrt.melmac.net/pbr/#use-resolvers-set-support

Could someone tell me how to do it, here I leave the photos so that you know the version that I use and exactly the steps that I must take.

The vpn is wireguard

Thanks in advance

[egc]

If you want one of you LAN clients to use the WAN instead of the VPN then start with giving that LAN client a static lease.

The Static lease is used in the PBR.

See this example where I have one of my LAN clients (192.168.9.123) using the WAN:

Note: you are probably not using ipset/nftset so set the "Use resolver set support for domains" to disabled

[geres]

edit: Some web pages do not load but others do and ping correctly
If I connect it to a vpn client from the pc, the pages work, which is something from the router
I edit again routed to a wifi router in android goes well

[egc]

Not exactly sure what the problem is but can you show output of:

cat /etc/config/network
cat /etc/config/firewall
cat /etc/config/pbr

Use the preformatted text </> to format the output before posting

Remember to redact passwords, MAC addresses and any public IP addresses you may have:

[lleachii]

@geres

What I would like to do is bypass the vpn with a device.

Reference for others: Bypass vpn wireguard

(In the future, feel free to discuss in the original thread instead of making a new one.)

[geres]

I have restarted the router and solved

thank you very much for your attention