I've tried to build clean vanilla 24.10.0 and got the same issue as I got on 23.05.5 while updating the base-files package. Any help is appreciated.
Here is the log
opkg install base-files
Upgrading base-files on root from 1~6df0e3d02a to 1655~6df0e3d02a...
Downloading https://downloads.openwrt.org/releases/24.10.0/targets/mediatek/filogic/packages/base-files_1655~6df0e3d02a_aarch64_cortex-a53.ipk
umount: devpts busy - remounted read-only
umount: tmpfs busy - remounted read-only
umount: can't remount overlayfs:/overlay read-only
umount: can't remount tmpfs read-only
umount: proc busy - remounted read-only
Removing obsolete file /etc/uci-defaults/99-fudy.sh.
Configuring base-files.
sysctl: error setting key 'vm.min_free_kbytes': Read-only file system
/etc/rc.common: line 32: can't create /proc/sys/net/ipv6/conf/default/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/all/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/br-lan/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/default/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/eth0/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/eth1/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/lo/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/phy0-ap0/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/phy1-ap0/accept_ra: Read-only file system
sysctl: error setting key 'kernel.panic': Read-only file system
sysctl: error setting key 'kernel.core_pattern': Read-only file system
sysctl: error setting key 'fs.suid_dumpable': Read-only file system
sysctl: error setting key 'fs.protected_hardlinks': Read-only file system
sysctl: error setting key 'fs.protected_symlinks': Read-only file system
sysctl: error setting key 'net.core.bpf_jit_enable': Read-only file system
sysctl: error setting key 'net.core.bpf_jit_kallsyms': Read-only file system
sysctl: error setting key 'net.ipv4.conf.default.arp_ignore': Read-only file system
sysctl: error setting key 'net.ipv4.conf.all.arp_ignore': Read-only file system
sysctl: error setting key 'net.ipv4.ip_forward': Read-only file system
sysctl: error setting key 'net.ipv4.icmp_echo_ignore_broadcasts': Read-only file system
sysctl: error setting key 'net.ipv4.icmp_ignore_bogus_error_responses': Read-only file system
sysctl: error setting key 'net.ipv4.igmp_max_memberships': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_fin_timeout': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_keepalive_time': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_syncookies': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_timestamps': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_sack': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_dsack': Read-only file system
sysctl: error setting key 'net.ipv6.conf.default.forwarding': Read-only file system
sysctl: error setting key 'net.ipv6.conf.all.forwarding': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_acct': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_checksum': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_tcp_timeout_established': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_udp_timeout': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_udp_timeout_stream': Read-only file system
/etc/rc.common: eval: line 22: can't create /proc/sys/kernel/hostname: Read-only file system
sysctl: error setting key 'vm.min_free_kbytes': Read-only file system
/etc/rc.common: line 32: can't create /proc/sys/net/ipv6/conf/default/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/all/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/br-lan/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/default/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/eth0/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/eth1/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/lo/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/phy0-ap0/accept_ra: Read-only file system
/etc/rc.common: line 34: can't create /proc/sys/net/ipv6/conf/phy1-ap0/accept_ra: Read-only file system
sysctl: error setting key 'kernel.panic': Read-only file system
sysctl: error setting key 'kernel.core_pattern': Read-only file system
sysctl: error setting key 'fs.suid_dumpable': Read-only file system
sysctl: error setting key 'fs.protected_hardlinks': Read-only file system
sysctl: error setting key 'fs.protected_symlinks': Read-only file system
sysctl: error setting key 'net.core.bpf_jit_enable': Read-only file system
sysctl: error setting key 'net.core.bpf_jit_kallsyms': Read-only file system
sysctl: error setting key 'net.ipv4.conf.default.arp_ignore': Read-only file system
sysctl: error setting key 'net.ipv4.conf.all.arp_ignore': Read-only file system
sysctl: error setting key 'net.ipv4.ip_forward': Read-only file system
sysctl: error setting key 'net.ipv4.icmp_echo_ignore_broadcasts': Read-only file system
sysctl: error setting key 'net.ipv4.icmp_ignore_bogus_error_responses': Read-only file system
sysctl: error setting key 'net.ipv4.igmp_max_memberships': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_fin_timeout': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_keepalive_time': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_syncookies': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_timestamps': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_sack': Read-only file system
sysctl: error setting key 'net.ipv4.tcp_dsack': Read-only file system
sysctl: error setting key 'net.ipv6.conf.default.forwarding': Read-only file system
sysctl: error setting key 'net.ipv6.conf.all.forwarding': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_acct': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_checksum': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_tcp_timeout_established': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_udp_timeout': Read-only file system
sysctl: error setting key 'net.netfilter.nf_conntrack_udp_timeout_stream': Read-only file system
Collected errors:
* resolve_conffiles: Existing conffile /etc/group is different from the conffile in the new package. The new conffile will be placed at /etc/group-opkg.
* resolve_conffiles: Existing conffile /etc/passwd is different from the conffile in the new package. The new conffile will be placed at /etc/passwd-opkg.
* resolve_conffiles: Existing conffile /etc/shadow is different from the conffile in the new package. The new conffile will be placed at /etc/shadow-opkg.
Could it be because I have to configure fstab but I don't know how to do it? I thought buildroot should configure it on it's own...
All other packages are installing or updating fine, I can create new files and edit them. The only issue is with base-files package.
They say it's not recommended to upgrade packages at all. Especially base-files. I just wanted to check out if this is kind of normal or if there is something I've missed in the make menuconfig or in my code edits trying to add support for a new device which makes this thing happen?