Hola, por favor necesito ayuda.
Tengo un pharo cpe510 v2 fuera de sevicio por corte de energia mientras actualizaba el firmware. He intentado recuperarlo con tftpd64 y siempre me da un error de "vmlinuz" he visto miles de respuesta hecho casi todo lo que dicen en los foros y nada
Necesito que alguien me diga este es la imagen y esta es el vmlinuz tan simple.como eso
No me manden a convertir archivos ni buscar mas porque la verdad no se
The preferred language in the OpenWrt forum is english.
When writing in your native language, please always provide an english translation.
This way other users all around the world can take part in the discussion and possibly benefit from the outcome, without having to use a translator.
Thanks! 
Hello, please I need help. I have a pharo cpe510 v2 out of service due to a power outage while updating the firmware. I have tried to recover it with tftpd64 and it always gives me a "vmlinuz" error. I have seen thousands of responses done almost everything they say in the forums and nothing I need someone to tell me this is the image and this is the vmlinuz as simple as that
1 Like
¡Hola! Hi!
You should see TFTP request for filename in tftp server log. If you dont - likely your windows firewall needs to be disabled. Then check your served file exactly matches the requested one.
Thanks, I already did it and nothing. Through putty I can see what the CPE510 loads, I connect it through a serial port and it is always the same response for all the firmware images that I have downloaded and renamed "recovery.bin", incorrect image
Any country code like CA EU CN on the back label? All regional firmwares support most devices but not all, you have to extract supportlist (like linux "strings" ) and match the country code label.
The glitches are strange on serial.
thank you very much to all, I hope that for Christmas Santa Claus brings me a better or more powerful TP-link. here unfortunately they have a very high price
1 Like
You should be able to find along lines of cudy or gl.inet under 50$
https://openwrt.org/toh/views/toh_available_16128_ax-wifi
If glitches on serial are caused by power filter capacitor(s) leaked you need to solder good one back, likely bits flip towards flash at the same rate and you cannot program anything. Happens in 5+ years.
I win 0.11 USD/hrs
1 Like
Ouch, lets call Santa.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.