Need openwrt os for Netis N6 router
1 Like
Who doesn't.
Same device?
https://fccid.io/T58N6TR/
1 Like
Using zoom pdf at the fccid.io site I could barely make out that it has Mediatek chips.
This site suggests that it is MT7621 based:
https://www.speedguide.net/routers/netis-n6-ax1800-dual-band-gigabit-wi-fi-6-router-4791
It potentially is doable and there are 2 Netis MT7621AT devices already in the data base. If you are lucky you may just need to update the wifi modules and the partition scheme: 16MB for the N6 vs 128MB for the other devices.
2 Likes
my router FCC ID T58N6R
1 Like
Netis N6
16MB MT7621AT, MT7905DAN Baseband, MT7975DN
1 Like
I bought a netis N6 router. Please, is there a firmware for the router? Thanks for the answer
based on the posts in this thread, what do you think ?
1 Like
There is a firmware on this forum (https://4pda.to/forum/index.php?showtopic=1065564&view=findpost&p=124431963), but it is very old and I can't do it, and it's not clear from where it came from. If there is an old one there may be a new one
then it probably didn't come from here.
perhaps you should ask them ?
1 Like
I asked, but there is no answer(((
I think he used this guide:
LEDE, that's older than the device itself.
I understand it. I would like to know if it is possible to compile firmware based on newer versions of OpenWRT?
The chipset seems to be popular
I see no reason why it shouldn't be ...
Netis N6
FCC ID T58N6R
Rom 16MB,Ram 256MB, MT7621AT, MT7905DAN Baseband, MT7975DN
1 Like
disassemble the router and take a picture of the insides? but what's next is very difficult (((I need help
We talking about this https://www.netisru.com/Home/detail/id/137.html
This model have another specs.
https://4pda.to/forum/index.php?showtopic=1065564&view=findpost&p=124698658
The photos are already posted ?
You'll still need to take it apart, to get serial access.
no problem, I'm ready to disassemble at least 10 times!