Check the github commits.
It's usually not how it works, it's hard to add support for a device you don't own.
you told the system with artmtd -w board_hw_id 29764958+0+128+512+4x4+4x4+cascade that it only has 512mb ram.
So what's needed now, is looking at
https://git.openwrt.org/?p=openwrt/openwrt.git;a=commit;h=823242185b56ea518568296f1a5834f736f12076
building a dts etc for the BR200, submitting and waiting for it to be checked and merged.
agreed, I'm happy that the r7800 image boots on the br200, but as I do not own the device, I'm unable to help further.
Ok, sure, I'm up for adding support of BR200.
But, I don't have much knowledge in this domain.
Do yo have any tutorial to create the image ?
It's all in the wiki,
I'd start with the R7800 device details, adapt it to the BR200, and submit.
I don't understand what to do with this page.
Where start to write the page like this:
It tells you how to add support for a completely new device.
Seems to me you should start in the other end, see if you can create an usable image for it 1st.
1 Like
@xmow49 are all the leds correct on the BR200?
If you grab openwrt-imagebuilder-22.03.3-ipq806x-generic.Linux-x86_64.tar.xz you would be able to modify the R7800 device and build an image for the BR200.
This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.