Hi, does anyone know what firmware version UAP-LRV2 is available?
[Moderator Edit: Added English Translation]
The preferred language of the OpenWrt forums is English, as this helps maximize the number of people who can participate in the conversation. Accordingly, please be sure to post in English.
You may use an online translator, and you're welcome to also include your native language in addition to English.
Thank you.
hola alguien sabe UAP-LRV2 hasta que version firmware llega
I have split your post into a new thread because it was originally in a 7 year old thread that would probably have been irrelevant at this time.
Please see this table of hardware entry:
https://openwrt.org/toh/ubiquiti/unifi_ap
Specifically, there is a note at the top of the page:
NOTE for UAP-v2 : As for July 2018, Ubiquiti seems to have blocked custom firmware installation possibility by using signatures on all 3.7 and later brand firmwares. As long as there is no brand pre-3.7 firmware available (in order to downgrade) for UAP-v2 devices, installing OpenWrt/LEDE could be impossible , as seen on the forum https://forum.lede-project.org/t/are-ubiquiti-actively-blocking-installation-of-third-party-firmware/4301 and https://forum.lede-project.org/t/are-ubiquiti-blocking-lede-installation/3877.
The older saucer APs are screwed together rather than glued, so it is not complicated to open the case and install with serial. This will bypass the firmware signature checks.
The problem is that no one really knows what a v2 is. There isn't a "v2" build. Can you look at the CPU inside yours and post the chip number?
Better pictures in addition to your text rendering of chip labels.