very nice release, thank you
Thank you very much
Hello,
This new 19.07.4 STABLE release will keep the SNAPSHOT image configuration? I need to update in remote and can not lose any config.
Regards.
I'm not sure.
1 Like
OK, I will wait to stay locally to update.
Regards.
Already tried using this image however after a few hours of testing and using my router, my wireless AP gets disconnected randomly. Upon further checking, I saw some of these logs:
[ 3132.376872] rt3050-esw 10110000.esw: link changed 0x14
[ 3363.864118] rt3050-esw 10110000.esw: link changed 0x16
[25488.142417] rt3050-esw 10110000.esw: link changed 0x14
[25923.085644] rt3050-esw 10110000.esw: link changed 0x16
[25997.107528] rt3050-esw 10110000.esw: link changed 0x06
[26012.364489] rt3050-esw 10110000.esw: link changed 0x16
[26023.572812] rt3050-esw 10110000.esw: link changed 0x06
[26026.159816] rt3050-esw 10110000.esw: link changed 0x16
[26093.035030] rt3050-esw 10110000.esw: link changed 0x14
[26122.306629] rt3050-esw 10110000.esw: link changed 0x16
[26232.068766] rt3050-esw 10110000.esw: link changed 0x14
[26245.262659] rt3050-esw 10110000.esw: link changed 0x16
[26289.308509] rt3050-esw 10110000.esw: link changed 0x14
[26336.207169] rt3050-esw 10110000.esw: link changed 0x16
[41273.628753] rt3050-esw 10110000.esw: link changed 0x12
[41275.251216] rt3050-esw 10110000.esw: link changed 0x16
[41281.279571] rt3050-esw 10110000.esw: link changed 0x12
[66986.802467] rt3050-esw 10110000.esw: link changed 0x16
[66990.265095] rt3050-esw 10110000.esw: link changed 0x12
[66993.063303] rt3050-esw 10110000.esw: link changed 0x16
[66996.811015] rt3050-esw 10110000.esw: link changed 0x12
[66999.551367] rt3050-esw 10110000.esw: link changed 0x16
[67006.281990] rt3050-esw 10110000.esw: link changed 0x12
[67009.100168] rt3050-esw 10110000.esw: link changed 0x16
[89233.465712] rt3050-esw 10110000.esw: link changed 0x00
[89233.503159] device wlan0 left promiscuous mode
[89233.503286] br-lan: port 2(wlan0) entered disabled state
[89233.940585] br-***********: port 2(wlan0-1) entered disabled state
Installed packages are SQM-QOS, NFT-QOS, MWAN3, SNMPD and OPENVPN.
What should I do with this error?
And noticed I am having this error:
[73425.599643] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[73425.605933] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[73425.605951] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02c88000, max=1024, ctx=292, dtx=292, fdx=110, next=292
[73425.605966] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=02db8000, max=1024, calc=554, drx=555
[73433.077299] do_page_fault(): sending SIGSEGV to snmpd for invalid read access from 00000014
[73433.077312] epc = 77de414f in libnetsnmpmibs.so.35.0.0[77dcb000+4d000]
[73433.077339] ra = 77de4139 in libnetsnmpmibs.so.35.0.0[77dcb000+4d000]
[73435.599377] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[73435.605668] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[73435.605686] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02c88000, max=1024, ctx=125, dtx=125, fdx=38, next=125
[73435.605701] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=0248c000, max=1024, calc=249, drx=250
[82185.343896] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[82185.350201] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[82185.350220] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02c88000, max=1024, ctx=978, dtx=978, fdx=918, next=978
[82185.350235] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=02db8000, max=1024, calc=719, drx=720
[82195.343543] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[82195.349834] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[82195.349852] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02db8000, max=1024, ctx=459, dtx=459, fdx=449, next=459
[82195.349866] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=034b8000, max=1024, calc=304, drx=305
[82205.343226] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[82205.349517] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[82205.349535] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02db8000, max=1024, ctx=317, dtx=317, fdx=153, next=317
[82205.349549] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=0346c000, max=1024, calc=326, drx=327
[82215.342924] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[82215.349217] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[82215.349234] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02db8000, max=1024, ctx=252, dtx=252, fdx=16, next=252
[82215.349250] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=0248c000, max=1024, calc=171, drx=172
[85030.232139] mtk_soc_eth 10100000.ethernet eth0: transmit timed out
[85030.238435] mtk_soc_eth 10100000.ethernet eth0: dma_cfg:00000055
[85030.238452] mtk_soc_eth 10100000.ethernet eth0: tx_ring=0, base=02db8000, max=1024, ctx=724, dtx=724, fdx=682, next=724
[85030.238467] mtk_soc_eth 10100000.ethernet eth0: rx_ring=0, base=02c88000, max=1024, calc=120, drx=121
this is know bug for 19.07.4 stable. both my mt7628 and mt7620 have this problem.
1 Like
Now it's officially supported: http://downloads.openwrt.org/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-xiaomi_mi-router-4c-squashfs-sysupgrade.bin
3 Likes
Hello MacTavish,
"19.07.4 STABLE release" : just out of the box (eg cleared config), the wifi still sucks. 800Kbit/s. Distance 1 meter between antennas....
Is "/snapshots/targets/ramips/mt76x8/openwrt-ramips-mt76x8-xiaomi_mi-router-4c-squashfs-sysupgrade.bin" equal to your 19.07.4 ?
Note:
with the previous build, setting force Wifi N/legacy did not change anything
Not N/Legacy. Only N and tick "Force 40MHz mode" in Advanced Settings.
Sad 
I tried this one but it seems luci is not installed. uhttpd is not working either.
I will try. Thank you.
just FYI
Now (i think) it is official image, the opkg update software returns some upgradable packages. Some of them seem ready long before this image. Strange or I missinterpret the names
- uci 2019-09-01-415f9e48-3 » 2019-09-01-415f9e48-4
- firewall 2019-11-22-8174814a-2 » 2019-11-22-8174814a-3
- libuci20130104 2019-09-01-415f9e48-3 » 2019-09-01-415f9e48-4
Hi mr.Mac i used your openwrt ver. for xi 4c router but some of them the wifi power is 14 dbm and the other is 20 dbm how can i convert 14 into 20 is it possible
i installed your openwrt in 120 devices and will be more
thank u
Some variants of 4C has 20 dBm option while others has 14. I'm guessing it's limited on eeprom. I don't know why it's limited like that but I'm guessing it involves where it's produced.
1 Like
The country code (wifi adv settings) you select imposes the local restrictions on the wifi, power, channels and probably other 'max' settings.
I unchecked "allow legacy 802.11 rates"
I unchecked "Force 40MMhz mode" in adv settings
This immediately effect the TX/RX with my test machine
If I remember well, the slowdown occurs after 'some time' of usage.
but it is slow anyway (distance 1 meter)
Download 4.2Mbps (from internet) should be 40 to 54Mbps
Upload 10.0Mbps