Openwrt als Repeater für Fritzbox

Hi there
I hope that someone can help me here.
I have a Tp link Archer c50 with openwrt.
I would like to register this to the Fritzbox with 5 GHz and it should then pass on the network via 2.4 GHz and LAN cable.
I got this up and running but unfortunately I can no longer access my hard drive on the Fritzbox.
Probably because the two routers have different addresses.
Thank you
Berndv
Hallo
Ich hoffe das mir hier jemand helfen kann.
Ich habe einen Tp link Archer c50 mit openwrt.
Diesen möchte ich per 5 GHz an die Fritzbox anmelden und er soll dann per 2,4 GHz und LAN Kabel das Netz weitergeben.
Dieses habe ich schonmal zum laufen gebracht aber leider kann ich dann nicht mehr auf meine Festplatte an der Fritzbox zugreifen.
Vermutlich da die beiden Router ja verschiedene Adressen haben.
Danke
Bernd

you should configure the Archer C50 according to https://openwrt.org/docs/guide-user/network/wifi/relay_configuration.
to access mass storage attached to the Fritzbox it may be necessary to have a look at the firewall settings on the Archer C50 wifi extender, depending on the protocol.
btw: forum language is English. you may want to edit your original post so everybody can understand the question.