Adding OpenWrt support for Xiaomi "Redmi Router AX6S"/"Xiaomi Router AX3200" - #2139 by dimosit - image generated by firmware selector boots without problem.
Ok, thank you, I will give it a try again tomorrow.
Best regards.
Anyone using AdGuardHome with 24.10.0? Since I upgraded it, I started seeing the error below every hour (deleting bucket err="bucket not found"). It is not device specific (I am seeing this on a NanoPi R6S and on a Redmi AX6S, both running 24.10.0):
root@ap1-router:~# logread | grep "bucket"
Tue Feb 11 03:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 06:00:00.255346 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 04:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 07:00:00.833422 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 05:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 08:00:00.379777 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 06:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 09:00:00.920969 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 07:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 10:00:00.460454 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 08:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 11:00:00.017533 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 09:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 12:00:00.576655 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 10:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 13:00:00.140509 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 11:00:00 2025 daemon.err AdGuardHome[5428]: 2025/02/11 14:00:00.700777 [info] stats: warning: deleting bucket err="bucket not found"
I'm not at home to chek
but
-----------------------------------------------------
OpenWrt 24.10.0, r28427-6df0e3d02a
-----------------------------------------------------
root@OpenWrt:~# logread | grep "bucket"
Tue Feb 11 10:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 09:00:00.529030 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 11:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 10:00:00.243404 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 12:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 11:00:00.530898 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 13:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 12:00:00.824460 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 14:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 13:00:00.092895 [info] stats: warning: deleting bucket err="bucket not found"
Tue Feb 11 15:00:00 2025 daemon.err AdGuardHome[5025]: 2025/02/11 14:00:00.942885 [info] stats: warning: deleting bucket err="bucket not found"
root@OpenWrt:~#
1 Like
Yea, like 5 pepople who aready reported bug to agh github.
2 Likes
I've tested the build. So, far I haven't noticed any issues.
1 Like
hi
if u upgrade without saving onfiguration via nand or via emmc there wont be a any problem?
1 Like
Good to know. My TP-Link C2600 is running in AP mode with 3 vlan's, bridge network config, tagged on lan1, starting today with version 24.10.0. See if it stays stable.
Target doesn't matter, I've used both owut and a full clean sysupgrade then redownload packages and reenter settings manually (I have everything written down in a text file just in case) both methods work great and manual reentry is only ~15min which I do sometimes just for fun and to optimize any settings I have. Also running an MT6000, working fantastic on 24.10.
AVM Fritzbox 4040 (ipq40xx/generic)
found this in my system.log
Summary
Tue Feb 11 18:55:53 2025 kern.info kernel: [ 138.639194] qca8k-ipq4019 c000000.switch wan: Link is Up - 1Gbps/Full - flow control off
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.085409] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.085494] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
Tue Feb 11 18:55:55 2025 kern.info kernel: [ 140.121174] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
Tue Feb 11 18:55:55 2025 kern.info kernel: [ 140.122157] ath10k_ahb a800000.wifi: wmi print 'free: 53252 iram: 13432 sram: 35752'
Tue Feb 11 18:55:55 2025 kern.info kernel: [ 140.402843] ath10k_ahb a800000.wifi: rts threshold -1
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.403271] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.406965] ------------[ cut here ]------------
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.417869] WARNING: CPU: 2 PID: 1142 at backports-6.12.6/net/mac80211/main.c:272 0xbf14f85c [mac80211@ef4af8da+0x77000]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.422623] Modules linked in: pppoe ppp_async nft_fib_inet nf_flow_table_inet ath10k_pci(O) ath10k_core(O) ath(O) pppox ppp_generic nft_reject_ipv6 nft_reject_ipv4 nft_reject_inet nft_reject nft_redir nft_quota nft_numgen nft_nat nft_masq nft_log nft_limit nft_hash nft_flow_offload nft_fib_ipv6 nft_fib_ipv4 nft_fib nft_ct nft_chain_nat nf_tables nf_nat nf_flow_table nf_conntrack mac80211(O) cfg80211(O) slhc nfnetlink nf_reject_ipv6 nf_reject_ipv4 nf_log_syslog nf_defrag_ipv6 nf_defrag_ipv4 libcrc32c hwmon crc_ccitt compat(O) sha512_arm ghash_arm_ce cmac leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom gpio_button_hotplug(O) crc32c_generic
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.468296] CPU: 2 PID: 1142 Comm: hostapd Tainted: G O 6.6.73 #0
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.490497] Hardware name: Generic DT based system
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.498145] Function entered at [<c030d1d8>] from [<c0308ec8>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.502824] Function entered at [<c0308ec8>] from [<c0a5056c>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.508640] Function entered at [<c0a5056c>] from [<c032165c>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.514456] Function entered at [<c032165c>] from [<c03217dc>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.520271] Function entered at [<c03217dc>] from [<bf14f85c>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.526096] Function entered at [<bf14f85c>] from [<bf14f9b0>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.531903] Function entered at [<bf14f9b0>] from [<c0869f58>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.537720] Function entered at [<c0869f58>] from [<c086a3bc>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.543535] Function entered at [<c086a3bc>] from [<c086a454>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.549350] Function entered at [<c086a454>] from [<c093a304>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.555168] Function entered at [<c093a304>] from [<c093cb5c>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.560983] Function entered at [<c093cb5c>] from [<c083c25c>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.566800] Function entered at [<c083c25c>] from [<c04c6554>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.572616] Function entered at [<c04c6554>] from [<c0300040>]
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.578430] Exception stack(0xc32dbfa8 to 0xc32dbff0)
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.584252] bfa0: 00000010 be80c848 00000010 00008914 be80c848 00000000
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.589377] bfc0: 00000010 be80c848 00000010 00000036 00000001 00000001 00000000 00000020
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.597533] bfe0: 00585ea4 be80c708 004fff94 b6ecf66c
Tue Feb 11 18:55:55 2025 kern.warn kernel: [ 140.605726] ---[ end trace 0000000000000000 ]---
Used the image builder to create a 24.10.0 image with the non-ct firmware
Does not have such error messages in the system log
1 Like
If I remember correctly, luci-lua-runtime only gets installed if you have an app installed which depends on the Lua compatibility layer (see https://github.com/openwrt/luci/issues/7310 for affected), you probably had an app installed in your 23.05.5 installation which pulled that in automatically as a dependency.
1 Like
Yes but I also had to upgrade the bootloader
Sun Feb 9 10:20:57 2025 user.info upgrade: The device is supported, but the config is incompatible to the new image (1.1->1.2). Please upgrade without keeping config (sysupgrade -n).
Sun Feb 9 10:20:57 2025 user.info upgrade: SPI-NAND flash layout changes require bootloader update
So I followed grauerfuchs advice
but thanks for Your advice I' sure others will benefit from it
I checked and you're right: it was not in my 23.05.5 "base"; nevertheless, I don't know which app installed it... 
1 Like
Forcing the IGMP version has no effect on the interfaces. br-lan and eth1.20
ubus call system board
{
"kernel": "6.6.73",
"hostname": "Network",
"system": "ARMv8 Processor rev 3",
"model": "Raspberry Pi 4 Model B Rev 1.1",
"board_name": "raspberrypi,4-model-b",
"rootfs_type": "ext4",
"release": {
"distribution": "OpenWrt",
"version": "24.10.0",
"revision": "r28427-6df0e3d02a",
"target": "bcm27xx/bcm2711",
"description": "OpenWrt 24.10.0 r28427-6df0e3d02a",
"builddate": "1738624177"
}
}
cat /proc/net/igmp
Idx Device : Count Querier Group Users Timer Reporter
1 lo : 1 V3
010000E0 1 0:00000000 0
2 eth0 : 1 V3
010000E0 1 0:00000000 0
4 eth1 : 1 V3
010000E0 1 0:00000000 0
5 phy0-ap0 : 1 V3
010000E0 1 0:00000000 0
6 br-lan : 4 V2
160000E0 1 1:000000FD 1
020000E0 1 0:00000000 1
010000E0 1 0:00000000 0
6A0000E0 1 0:00000000 1
7 eth1.10 : 1 V3
010000E0 1 0:00000000 0
8 eth1.20 : 5 V2
0300C2EF 1 0:00000000 1
3C0100E0 1 0:00000000 1
8F98C0EF 1 0:00000000 1
FAFFFFEF 1 0:00000000 1
010000E0 1 0:00000000 0
10 pppoe-wan : 1 V3
010000E0 1 0:00000000 0
14 ifb-pppoe-wan: 1 V3
010000E0 1 0:00000000 0
cat /etc/config/network
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config globals 'globals'
option ula_prefix 'fd23:8947:12ed::/48'
option packet_steering '1'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth0'
option igmp_snooping '1'
option multicast '1'
option igmpversion '3'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '10.12.12.1'
option netmask '255.255.255.0'
option ip6assign '60'
option igmp_snooping '1'
config device
option type '8021q'
option ifname 'eth1'
option vid '10'
option name 'eth1.10'
config device
option type '8021q'
option ifname 'eth1'
option vid '20'
option name 'eth1.20'
option multicast '1'
option igmpversion '3'
config interface 'wan'
option proto 'pppoe'
option device 'eth1.10'
option username '*'
option password '*'
option ipv6 'auto'
config interface 'iptv'
option proto 'static'
option device 'eth1.20'
option ipaddr '10.10.10.1'
option netmask '255.255.255.0'
config interface 'accessmodem'
option proto 'static'
option device 'eth1'
option ipaddr '192.168.1.5'
option netmask '255.255.255.0'
Was this for the attended sys upgrade? I didn’t actually use that for upgrading, I downloaded the update from OpenWRT directly and upgraded that path without issue. My disclaimer is I don’t use the wifi on my Linksys 3200, and have a dumb AP to do wifi.
Two TP-LINK Archer A7s used as wireless access points and switches updated using Luci from 23.05.5 to 24.10.0 with settings kept, missing packages installed and devices rebooted. Both appear to be running normally.
The Archer C2600 v1 has not yet been updated, as it has an IPQ806X, so will require reconfiguration as router, switch, wireless access point, DHCP and DNS host, NTP relay, HA Proxy, Dynamic DNS manager, and coffee grinder.
Thanks again to all who do the work to make this not just possible, but easy.
gl.inet gl mt3000
cannot custom build:
Error: Impossible package selection
STDERR
Generate local signing keys...
Generate local certificate...
Package list missing or not up-to-date, generating it.
A big Thankyou to all who’ve made OpenWrt possible for the Netgear Nighthawk XR500.
The Netgear XR500 is an "ipq806x" device and the SYSUPGRADE release notes, has a documented exception for this, which has been successfully accommodated in the upgrade process.
I installed OpenWrt v24.10.0 stable series as a SYSUPGRADE over v23.05.05, which was running on my XR500, using the upgrade menus in LuCI with the "Flash new firmware image" menu option.
After the upgrade completed, with the XR500 powered on, I found that I had to perform a factory reset of XR500 by inserting a pin into the reset button on the rear of the XR500 until the white LED power-on started flashing RED.
- After reboot, I performed another power OFF/ON
- After bootup I was able to LuCI access via 192.168.1.1 to logon.
Now 24.10.0 has been running successfully and stable for many days.
Kind regards to all at OpenWrt.org
nanopi r4s 4gb
reboot = lan down
After switching on:
root@OpenWrt:~# logread | grep -i 'network\|eth\|wan\|lan\|link'
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.000000] psci: probing for conduit method from DT.
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.046563] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.263809] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.264407] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.265058] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.345562] 8021q: 802.1Q VLAN Support v1.8
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.401607] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.402203] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.402901] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.415008] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.415614] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.416348] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.441153] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.441161] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.442819] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.443485] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.444105] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.444602] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.445105] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.445666] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.451209] rk_gmac-dwmac fe300000.ethernet: init for RGMII
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.452009] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.452642] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.453102] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.453780] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.454436] rk_gmac-dwmac fe300000.ethernet: COE Type 2
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.454895] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.455510] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.456074] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.457389] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 0.457899] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Mon Feb 3 23:36:32 2025 kern.err kernel: [ 17.653936] leds enp1s0-0::lan: Setting an LED's brightness failed (-524)
Mon Feb 3 23:36:32 2025 kern.err kernel: [ 17.724357] leds enp1s0-1::lan: Setting an LED's brightness failed (-524)
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 17.764094] r8169 0000:01:00.0 eth1: RTL8168h/8111h, da:a0:67:80:58:d2, XID 541, IRQ 75
Mon Feb 3 23:36:32 2025 kern.info kernel: [ 17.764833] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
Mon Feb 3 23:36:32 2025 kern.err kernel: [ 17.773908] leds enp1s0-2::lan: Setting an LED's brightness failed (-524)
Mon Feb 3 23:36:33 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Feb 3 23:36:34 2025 user.notice : Added device handler type: macvlan
Mon Feb 3 23:36:34 2025 user.notice : Added device handler type: veth
Mon Feb 3 23:36:34 2025 user.notice : Added device handler type: Network device
Mon Feb 3 23:36:34 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' is enabled
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' is setting up now
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.043640] r8169 0000:01:00.0 eth1: Link is Down
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.044249] br-lan: port 1(eth1) entered blocking state
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.044734] br-lan: port 1(eth1) entered disabled state
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.045236] r8169 0000:01:00.0 eth1: entered allmulticast mode
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.046058] r8169 0000:01:00.0 eth1: entered promiscuous mode
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.048843] br-lan: port 1(eth1) entered blocking state
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.049329] br-lan: port 1(eth1) entered forwarding state
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' is now up
Mon Feb 3 23:36:34 2025 daemon.notice netifd: bridge 'br-lan' link is up
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.069101] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
Mon Feb 3 23:36:34 2025 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.124685] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=67)
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'lan' is enabled
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'lan' is setting up now
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'lan' is now up
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.134050] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.134745] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
Mon Feb 3 23:36:34 2025 kern.info kernel: [ 21.136434] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
Mon Feb 3 23:36:34 2025 daemon.notice netifd: bridge 'br-lan' link is down
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' has link connectivity loss
Mon Feb 3 23:36:34 2025 daemon.notice netifd: bridge 'br-lan' link is up
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'wan' has link connectivity
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Network device 'lo' link is up
Mon Feb 3 23:36:34 2025 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Feb 3 23:36:34 2025 user.notice firewall: Reloading firewall due to ifup of wan (br-lan)
Mon Feb 3 23:36:35 2025 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN
Mon Feb 3 23:36:35 2025 user.notice firewall: Reloading firewall due to ifup of lan (eth0)
Mon Feb 3 23:36:35 2025 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN
Mon Feb 3 23:36:35 2025 daemon.notice netifd: bridge 'br-lan' link is down
Mon Feb 3 23:36:35 2025 daemon.notice netifd: Interface 'wan' has link connectivity loss
Mon Feb 3 23:36:35 2025 kern.info kernel: [ 21.753890] br-lan: port 1(eth1) entered disabled state
Mon Feb 3 23:36:36 2025 daemon.notice netifd: Network device 'eth0' link is up
Mon Feb 3 23:36:36 2025 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Feb 3 23:36:36 2025 kern.info kernel: [ 22.777238] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Mon Feb 3 23:36:39 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Feb 3 23:36:39 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Mon Feb 3 23:36:39 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Mon Feb 3 23:36:41 2025 daemon.err uhttpd[1198]: [info] luci: accepted login on /admin/network/network for root from 192.168.1.183
Mon Feb 3 23:36:46 2025 authpriv.notice dropbear[2292]: Auth succeeded with blank password for 'root' from 192.168.1.183:58343
root@OpenWrt:~# dmesg | grep -i 'eth\|wan\|lan\|link'
[ 0.000000] psci: probing for conduit method from DT.
[ 0.046563] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.263809] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.264407] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.265058] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.345562] 8021q: 802.1Q VLAN Support v1.8
[ 0.401607] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.402203] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.402901] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.415008] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.415614] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.416348] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.441153] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.441161] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.442819] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.443485] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.444105] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.444602] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 0.445105] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.445666] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.451209] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.452009] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 0.452642] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 0.453102] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 0.453780] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 0.454436] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 0.454895] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 0.455510] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 0.456074] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 0.457389] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 0.457899] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 17.653936] leds enp1s0-0::lan: Setting an LED's brightness failed (-524)
[ 17.724357] leds enp1s0-1::lan: Setting an LED's brightness failed (-524)
[ 17.764094] r8169 0000:01:00.0 eth1: RTL8168h/8111h, da:a0:67:80:58:d2, XID 541, IRQ 75
[ 17.764833] r8169 0000:01:00.0 eth1: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 17.773908] leds enp1s0-2::lan: Setting an LED's brightness failed (-524)
[ 21.043640] r8169 0000:01:00.0 eth1: Link is Down
[ 21.044249] br-lan: port 1(eth1) entered blocking state
[ 21.044734] br-lan: port 1(eth1) entered disabled state
[ 21.045236] r8169 0000:01:00.0 eth1: entered allmulticast mode
[ 21.046058] r8169 0000:01:00.0 eth1: entered promiscuous mode
[ 21.048843] br-lan: port 1(eth1) entered blocking state
[ 21.049329] br-lan: port 1(eth1) entered forwarding state
[ 21.069101] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 21.124685] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=67)
[ 21.134050] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 21.134745] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 21.136434] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[ 21.753890] br-lan: port 1(eth1) entered disabled state
[ 22.777238] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
root@OpenWrt:~#
after reboot:
root@OpenWrt:~# logread | grep -i 'network\|eth\|wan\|lan\|link'
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.000000] psci: probing for conduit method from DT.
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.046544] NET: Registered PF_NETLINK/PF_ROUTE protocol family
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.263893] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.264490] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.265140] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.345958] 8021q: 802.1Q VLAN Support v1.8
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.402270] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.402867] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.403613] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.416502] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.417107] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.417808] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.443239] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.443894] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.444603] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.445345] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.445975] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.446481] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.446995] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.447584] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.453136] rk_gmac-dwmac fe300000.ethernet: init for RGMII
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.454273] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.455281] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.455749] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.456411] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.457073] rk_gmac-dwmac fe300000.ethernet: COE Type 2
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.457541] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.458164] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.458734] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.459259] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
Mon Feb 3 23:39:03 2025 kern.info kernel: [ 0.459776] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
Mon Feb 3 23:39:03 2025 kern.err kernel: [ 1.086199] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
Mon Feb 3 23:39:04 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Feb 3 23:39:04 2025 user.notice : Added device handler type: macvlan
Mon Feb 3 23:39:04 2025 user.notice : Added device handler type: veth
Mon Feb 3 23:39:04 2025 user.notice : Added device handler type: Network device
Mon Feb 3 23:39:05 2025 kern.info kernel: [ 20.503081] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
Mon Feb 3 23:39:05 2025 kern.info kernel: [ 20.564728] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=67)
Mon Feb 3 23:39:05 2025 kern.info kernel: [ 20.573916] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
Mon Feb 3 23:39:05 2025 daemon.notice netifd: Interface 'lan' is enabled
Mon Feb 3 23:39:05 2025 daemon.notice netifd: Interface 'lan' is setting up now
Mon Feb 3 23:39:05 2025 daemon.notice netifd: Interface 'lan' is now up
Mon Feb 3 23:39:05 2025 kern.info kernel: [ 20.574626] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
Mon Feb 3 23:39:05 2025 kern.info kernel: [ 20.576631] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
Mon Feb 3 23:39:05 2025 daemon.notice netifd: Network device 'lo' link is up
Mon Feb 3 23:39:05 2025 daemon.notice netifd: Interface 'loopback' has link connectivity
Mon Feb 3 23:39:05 2025 user.notice firewall: Reloading firewall due to ifup of lan (eth0)
Mon Feb 3 23:39:05 2025 user.notice ucitrack: Setting up /etc/config/dhcp reload dependency on /etc/config/network
Mon Feb 3 23:39:05 2025 user.notice ucitrack: Setting up /etc/config/network reload dependency on /etc/config/wireless
Mon Feb 3 23:39:05 2025 daemon.notice procd: /etc/rc.d/S96led: setting up led WAN
Mon Feb 3 23:39:05 2025 daemon.notice procd: /etc/rc.d/S96led: setting up led LAN
Mon Feb 3 23:39:06 2025 daemon.notice netifd: Network device 'eth0' link is up
Mon Feb 3 23:39:06 2025 daemon.notice netifd: Interface 'lan' has link connectivity
Mon Feb 3 23:39:06 2025 kern.info kernel: [ 22.211067] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
Mon Feb 3 23:39:10 2025 daemon.info dnsmasq[1]: using only locally-known addresses for lan
Mon Feb 3 23:39:10 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Mon Feb 3 23:39:10 2025 daemon.info dnsmasq-dhcp[1]: read /etc/ethers - 0 addresses
Mon Feb 3 23:39:28 2025 authpriv.notice dropbear[2138]: Auth succeeded with blank password for 'root' from 192.168.1.183:58552
root@OpenWrt:~# dmesg | grep -i 'eth\|wan\|lan\|link'
[ 0.000000] psci: probing for conduit method from DT.
[ 0.046544] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.263893] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.264490] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.265140] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.345958] 8021q: 802.1Q VLAN Support v1.8
[ 0.402270] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.402867] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.403613] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.416502] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.417107] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.417808] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.443239] rk_gmac-dwmac fe300000.ethernet: IRQ eth_wake_irq not found
[ 0.443894] rk_gmac-dwmac fe300000.ethernet: IRQ eth_lpi not found
[ 0.444603] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
[ 0.445345] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
[ 0.445975] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
[ 0.446481] rk_gmac-dwmac fe300000.ethernet: RX delay(0x11).
[ 0.446995] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
[ 0.447584] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
[ 0.453136] rk_gmac-dwmac fe300000.ethernet: init for RGMII
[ 0.454273] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
[ 0.455281] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
[ 0.455749] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
[ 0.456411] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
[ 0.457073] rk_gmac-dwmac fe300000.ethernet: COE Type 2
[ 0.457541] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
[ 0.458164] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
[ 0.458734] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
[ 0.459259] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
[ 0.459776] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
[ 1.086199] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 20.503081] rk_gmac-dwmac fe300000.ethernet eth0: Register MEM_TYPE_PAGE_POOL RxQ-0
[ 20.564728] rk_gmac-dwmac fe300000.ethernet eth0: PHY [stmmac-0:01] driver [RTL8211E Gigabit Ethernet] (irq=67)
[ 20.573916] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
[ 20.574626] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
[ 20.576631] rk_gmac-dwmac fe300000.ethernet eth0: configuring for phy/rgmii link mode
[ 22.211067] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
root@OpenWrt:~#
It's now 2025-02-12T08:44:00Z, I still get similar error while using firmware-selector to build a custom firmware. The error package is busybox:
Generate local signing keys...
Generate local certificate...
Package list missing or not up-to-date, generating it.
Building package index...
Downloading http://downloads.openwrt.org/releases/24.10.0/targets/mediatek/mt7622/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_core
Downloading http://downloads.openwrt.org/releases/24.10.0/targets/mediatek/mt7622/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/base/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_base
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/base/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/targets/mediatek/mt7622/kmods/6.6.73-1-49f3b78722ed2df9df713e744e978eb6/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_kmods
Downloading http://downloads.openwrt.org/releases/24.10.0/targets/mediatek/mt7622/kmods/6.6.73-1-49f3b78722ed2df9df713e744e978eb6/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/luci/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_luci
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/luci/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_packages
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/routing/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_routing
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/routing/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/telephony/Packages.gz
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/openwrt_telephony
Downloading http://downloads.openwrt.org/releases/24.10.0/packages/aarch64_cortex-a53/telephony/Packages.sig
Signature check passed.
Downloading file:packages/Packages
Updated list of available packages in /builder/build_dir/target-aarch64_cortex-a53_musl/root-mediatek/../../../../builder/dl/imagebuilder
Downloading file:packages/Packages.sig
Signature check passed.
Collected errors:
* opkg_install_pkg: Checksum or size mismatch for package busybox. Either the opkg or the package index are corrupt. Try 'opkg update'.
* opkg_install_cmd: Cannot install package base-files.
make[2]: *** [Makefile:234: package_install] Error 255
make[1]: *** [Makefile:171: _call_manifest] Error 2
make: *** [Makefile:349: manifest] Error 2