hi,
adblock working in here
no ads.
1 Like
Wifi still not working since RC1 only bug fixes changed to
daemon.notice netifd: radio0 (22542): ./mac80211.sh: eval: line 590: /usr/sbin/hostapd: not found
daemon.notice netifd: radio0 (22542): ./mac80211.sh: eval: line 590: /usr/sbin/hostapd: not founddaemon.notice netifd: radio0 (22138): Command failed: Request timed out
daemon.notice netifd: radio0 (22138): Command failed: Not found
daemon.notice netifd: radio0 (22138): Device setup failed: HOSTAPD_START_FAILED
daemon.notice netifd: Wireless device 'radio0' set retry=0
daemon.crit netifd: Wireless device 'radio0' setup failed, retry=0
Sorry, it's working now. It was enough to delete the previous Wireless file and configure again
Mi 4a gigabit router 5ghz does not work in channel set to auto mode
Just test mi4a gigabit wifi 5ghz set auto, working well in here,
When set to auto, it set to ch 36, not all my phone support this channel. But it work.
check your phone channel support list.
Updated WRT3200ACM with config from 22.03.2 with multi zone, multi vlan setup.
- after some time I realised that the switch sent all packets to all ports, again acting as a hub (flickering all LEDs on the router and on the connected devices)
- Software flow offloading breaks connection (worked before)
- bridge filtering with vlans is still not working (worked in 21.02 before switch migration to DSA)
I believe I consider the WRT3200ACM as broken. Went back to Fritzbox 4040, now thinking of BananaPi BPI-R3 (it has a wan port not connected to an internal switch).
Hi,
Installed on AZW U59 (x86/64).
Works fine so far and solves an annoying ipv6 issue I had on 22.03.2 (router would stop from time to time forwarding ipv6 packets and send destination unreachable icmpv6 to lan hosts, despite the uplink was fine)
how did you move to 6.1.x kernel?
I think 22.03 will be the latest for me and my 2 Belkin RT3200's going forward. I cannot establish 802.11s / mesh connectivity along with DNS / unbound issues. All related to mbedtls I am thinking.
22.05 does not have any such issues whatever settings i have i have set country to india and channel to auto but my router stay disable 5 ghz band. So it must be a bug.
This only happens when you set your country code to in
There is an update regarding Wireless regulations in India, I don't know if you have to adjust your configuration accordingly.
wireless-regdb: update regulatory rules for India (IN)
2 Likes
The firmware selector on the OpenWrt website allows you to customize the preinstalled packages, so you can change it to use wolfssl (or openssl) instead of mbedtls.
- Go to firmware selector, enter your device name, and choose 23.05.0-rc2 as the OpenWrt version. https://firmware-selector.openwrt.org/?version=23.05.0-rc2&target=mediatek%2Fmt7622&id=linksys_e8450
- Click the triangle next to "Customize installed packages and/or first boot script."
- Change "libustream-mbedtls" and "wpad-basic-mbedtls" to "libustream-wolfssl" and "wpad-basic-wolfssl" respectively.
- Click "Request Build," wait for it to finish building your customized firmware, and then download and install the sysupgrade as you normally would.
Does that fix your problem?
Hey, could fix the problem, I had setup the REPORT INTERFACE to -> any, it worked so under 22.03.2, after I changed to br-lan ... it started to work, and is now again operating normal showing me under DNS Report data as usual.
Thanks for the reply! Yes, I am creating custom builds in the firmware selector. I have tried a number of different ways to build images with varying results.
Here is a list of the packages I need (all openssl packages changed over to mbedtls):
Primary router:
base-files busybox ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-mt7622-firmware kmod-mt7915-firmware kmod-nft-offload kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only opkg ppp ppp-mod-pppoe procd procd-seccomp procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-mbedtls luci curl ddns-scripts ddns-scripts-services luci-app-ddns irqbalance openssh-sftp-server 6to4 luci-app-openvpn openvpn-mbedtls htop luci-app-sqm luci-app-unbound unbound-control auc luci-app-attendedsysupgrade luci-theme-openwrt-2020
Mesh router:
base-files busybox ca-bundle dnsmasq dropbear firewall4 fstools kmod-gpio-button-hotplug kmod-leds-gpio kmod-mt7622-firmware kmod-mt7915-firmware kmod-nft-offload kmod-usb3 libc libgcc libustream-mbedtls logd mtd netifd nftables odhcp6c odhcpd-ipv6only opkg ppp ppp-mod-pppoe procd procd-seccomp procd-ujail uboot-envtools uci uclient-fetch urandom-seed urngd wpad-mbedtls luci irqbalance openssh-sftp-server htop auc luci-app-attendedsysupgrade luci-theme-openwrt-2020
Those build successfully. Since there no mesh connectivity 23.05 is unusable for me. The issue is mesh links on both routers only report 6Mb. Signal strength matches my dBs in 22.03 but no mesh is established.
I also tried building images with the openssl packages (i.e. no changes from my 22.03 list) and the builds also complete successfully.
Wondering if I need to make different package selections to get my configuration working on the new version?
Use snapshot version
1 Like
Check again after couple hour
Can you share the result of 'cat /proc/interrupts' with 6.1?
I'd like to know if the packet steering fixed with the new kernal.
You built them, but did you try them? What was the result?
just flash with latest snapshot version, with same packages
after 45m running
OpenWrt SNAPSHOT, r23459-a0ae7a50e0
-----------------------------------------------------
root@OpenWrt:~# cat /proc/interrupts
CPU0 CPU1 CPU2 CPU3
9: 0 0 0 0 GIC-0 39 Level arch_mem_timer
13: 1223114 121335 113247 159777 GIC-0 20 Level arch_timer
16: 0 0 0 0 GIC-0 239 Level bam_dma
17: 0 0 0 0 GIC-0 270 Level bam_dma
18: 58471 0 0 0 GIC-0 178 Level bam_dma
19: 2 0 0 0 GIC-0 354 Edge smp2p
20: 6 0 0 0 GIC-0 340 Level msm_serial0
22: 0 0 0 0 GIC-0 216 Level 4a9000.thermal-sensor
23: 0 0 0 0 GIC-0 35 Edge wdt_bark
24: 0 0 0 0 GIC-0 357 Edge q6v5 wdog
25: 0 0 0 0 pmic_arb 51380237 Edge pm-adc5
26: 9 0 0 0 GIC-0 47 Edge cpr3
27: 0 0 0 0 smp2p 0 Edge q6v5 fatal
28: 1 0 0 0 smp2p 1 Edge q6v5 ready
29: 0 0 0 0 smp2p 2 Edge q6v5 handover
30: 0 0 0 0 smp2p 3 Edge q6v5 stop
31: 2745350 0 0 0 GIC-0 377 Level edma_txcmpl
32: 0 0 0 0 GIC-0 385 Level edma_rxfill
33: 2240077 0 0 0 GIC-0 393 Level edma_rxdesc
34: 0 0 0 0 msmgpio 34 Edge keys
35: 0 0 0 0 GIC-0 376 Level edma_misc
36: 64 0 0 0 GIC-0 353 Edge glink-native
37: 5 0 0 0 GIC-0 348 Edge ce0
38: 136155 0 0 0 GIC-0 347 Edge ce1
39: 29968 0 0 0 GIC-0 346 Edge ce2
40: 4934 0 0 0 GIC-0 343 Edge ce3
41: 1 0 0 0 GIC-0 443 Edge ce5
42: 5849 0 0 0 GIC-0 72 Edge ce7
43: 0 0 0 0 GIC-0 334 Edge ce9
44: 1 0 0 0 GIC-0 333 Edge ce10
45: 0 0 0 0 GIC-0 69 Edge ce11
46: 27450 0 0 0 GIC-0 189 Edge wbm2host-tx-completions-ring1
47: 0 0 0 0 GIC-0 323 Edge reo2ost-exception
48: 1563 0 0 0 GIC-0 322 Edge wbm2host-rx-release
49: 0 0 0 0 GIC-0 209 Edge rxdma2host-destination-ring-mac1
50: 0 0 0 0 GIC-0 212 Edge host2rxdma-host-buf-ring-mac1
51: 1050 0 0 0 GIC-0 190 Edge wbm2host-tx-completions-ring2
52: 0 0 0 0 GIC-0 211 Edge rxdma2host-destination-ring-mac3
53: 1 0 0 0 GIC-0 235 Edge host2rxdma-host-buf-ring-mac3
54: 1335 0 0 0 GIC-0 191 Edge wbm2host-tx-completions-ring3
55: 0 0 0 0 GIC-0 210 Edge rxdma2host-destination-ring-mac2
56: 0 0 0 0 GIC-0 215 Edge host2rxdma-host-buf-ring-mac2
57: 16 0 0 0 GIC-0 321 Edge reo2host-status
58: 77320 0 0 0 GIC-0 261 Edge ppdu-end-interrupts-mac1
59: 1 0 0 0 GIC-0 255 Edge rxdma2host-monitor-status-ring-mac1
60: 4248 0 0 0 GIC-0 263 Edge ppdu-end-interrupts-mac3
61: 1 0 0 0 GIC-0 260 Edge rxdma2host-monitor-status-ring-mac3
62: 0 0 0 0 GIC-0 262 Edge ppdu-end-interrupts-mac2
63: 0 0 0 0 GIC-0 256 Edge rxdma2host-monitor-status-ring-mac2
64: 9535 0 0 0 GIC-0 267 Edge reo2host-destination-ring1
65: 4211 0 0 0 GIC-0 268 Edge reo2host-destination-ring2
66: 8623 0 0 0 GIC-0 271 Edge reo2host-destination-ring3
67: 10637 0 0 0 GIC-0 320 Edge reo2host-destination-ring4
IPI0: 12245 12054 13084 8495 Rescheduling interrupts
IPI1: 282934 287829 100106 206355 Function call interrupts
IPI2: 0 0 0 0 CPU stop interrupts
IPI3: 0 0 0 0 CPU stop (for crash dump) interrupts
IPI4: 0 0 0 0 Timer broadcast interrupts
IPI5: 559 533 567 611 IRQ work interrupts
IPI6: 0 0 0 0 CPU wake-up interrupts
Err: 0
i switch back to rc2, the memory use is very high.
I did try them. The primary router is working fine with both the openssl list and the mbedtls list builds. The mesh router will not connect to the primary router.
Maybe it's just a matter of waiting until meshing is stable on 23.05?