OpenWrt 22.03.1 first service release

Neverends4 · October 14, 2022, 12:37am

Xiaomi Redmi AC2100 on MT7621, was running great on 22.03.0 for more than half a month except Luci did not show upnp mapping, but they are actually working when checking with corresponding apps.
After upgrading to 22.03.1 Luci shows upnp mapping ports correctly, but all apps begin to complain no upnp support...Tried to delete upnp lease and restart miniupnpd, no use.
any ideas?

stangri · October 14, 2022, 2:52am

Works for me on 22.03.1.

ne20002 · October 14, 2022, 6:20am

WRT3200ACM updated with image builder. No problems so far.

Falco · October 14, 2022, 10:06am

I've updated my router and 2 AP's/switches:
R7800
C2600
EAP 225 v3

All running fine, thanks for the update!

ppmm · October 14, 2022, 4:28pm

WNDR4300v1 sysupgrade no problem.

lleachii · October 14, 2022, 4:49pm

Cisco Mwraki MX60(W) - issues, see: [HOWTO] Installing OpenWrt on Cisco Meraki MX60 - #5 by NC1

WD N750 - issues, see - Update to OpenWrt 21.02.3 has destroyed my WD N750 - #27 by lleachii

Pico · October 14, 2022, 6:27pm

there is a 1 day old report about brand new Linux WiFi vulnerabilities.

My guess is there will be a 22.03.2 SR just a couple of days away.

lleachii · October 14, 2022, 7:33pm

Whoa...this is quite serious...so much so, I think I'm the only one so far who will say that in English...except here:

github.com

PurpleVsGreen/beacown/blob/master/README

Hi everyone,

In the following, I quickly introduce the PoC and briefly describe each CVE.

Please see attached:
* The PCAP files containing the Wifi frames triggering the vulnerabilities and
* inject-pcap.c to inject the Wifi frames into the 802.11 stack
* A complete log for each CVE

Thanks to Johannes Berg, who provided the inject-pcap.c script, quickly worked on all the patches and resolved the
issues!

The PoC uses mac80211_hwsim to inject the frames, but the vulnerabilities are - to my knowledge - driver-independent,
and we assume that they are exploitable over the air.
All the malformed frames are Beacon frames.

# PoC Execution

Boot a kernel with mac80211_hwsim included or load the module.
Install libnl-3.0 libnl-genl-3.0 libpcap, which is required by the PoC, and compile it as follows:

This file has been truncated. show original

@jow @hnyman @aparcar - FYI to tell the developers

anomeome · October 14, 2022, 7:40pm

There is thread...

greg45416 · October 14, 2022, 9:20pm

It's working well for me on my WRT3200ACM. Thanks for putting out another release!

olekstomek · October 14, 2022, 10:35pm

TP-Link TL-MR3420 v5 OpenWrt 21.02.3 -> OpenWrt 22.03.0 -> OpenWrt 22.03.1 updated with sucsess!

Sentenzo · October 15, 2022, 7:35am

[    5.895235] x86/CPU: CPU features have changed after loading microcode, but might not take effect.
[    5.913655] x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.

after last intel-microcode update i got this, 22.03.0 had no those messages, not even sure it's a error at all

KOA · October 15, 2022, 11:06am

Working great so far.
Netgear 4300V2. More than 28hours of uptime.

AlanDias17 · October 15, 2022, 11:58am

I'm using RPi4 and https-dns-proxy isn't working see this thread https://www.reddit.com/r/openwrt/comments/y1iyd7/help_httpsdnsproxy_isnt_working_anymore/

Sentenzo · October 15, 2022, 5:26pm

what is happended? why 22.03.2 released already? not even a week from 22.03.1 is 22.03.1 corrupted?

eginnc · October 15, 2022, 5:45pm

See here: https://forum.openwrt.org/t/openwrt-22-03-1-first-service-release/139424/32?u=eginnc
A new serious security issue was announced a couple days ago, and the OpenWrt developers have already tagged new stable versions to take care of it.

It is not as if we needed another reminder that the OpenWrt developers are awesome, but....well, they're awesome!

Ramon · October 16, 2022, 10:00am

yeah 100% agree. They are awesome. I am eagerly awaiting the release announcement though, as this bug sounds really serious. Maybe somebody should also make a bug announcement post similar to the WolfSSL bug?

lleachii · October 16, 2022, 1:52pm

Or convert this one:

data · October 16, 2022, 3:38pm

Thank you very much.

Unfortunately the problem with the USB-Port permanently resetting on Linksys MR8300 or maybe all ipq40xx platforms still exists in latest OpenWRT v22.03.01

In short, upon connecting an external usb storage device, the port keeps resetting / disables power to the device for short time leading to permanent connect / disconnect loop.

Please see Linksys MR8300, OpenWrt 22.03.0-rc4, USB port-powered storage devices not working - #29 by Barney for details. Maybe it hasn't come to the developers attention yet, since it is in another forum.

peras · October 16, 2022, 10:19pm

Upgraded from 21.02.02 to this version; noticed something is broken with SQM on this version - can get past 600mbit with SQM enabled. Running on i3-4160 CPU @ 3.60GHz, so not CPU bound, barley touching 15% on all cores.
When I disable SQM i get full gigabit download.
Reverted to previous version for a quick test and SQM is working fine; ingress set to 930mbit, and get around 900 on download test.

Anybody else has this problem?

EDIT:
I've been troubleshooting this for at least 3 hours, and half an hour after posting this I found the culprit; it seems the processor scaling_governor changed:
Version 22.03.1 scaling_governor: ondemand performance schedutil / schedutil is selected by default
Version 21.02.2 scaling_governor: performance powersave / powersafe is selected by default

When I change the scaling_governor to ondemand - everything works as a charm, 900+ mbit with SQM, and processor going to around 8% on all cores.

EDIT2:
Setting the minimum frequency to 1.2Ghz also does the trick