Hello,
i have a Compex WPJ419 Board with OpenWRT 19.7.5 (today compiled)
My Network on eth1 works fine on an untagged network switch.
I would like to enable 802.1q Support on my eth0
DMESG shows
8021q: 802.1Q VLAN Support v1.8
I configured a tagged VLAN on eth1, locally the IP on board is reachable, but other network devices are not reachable
If i restart my network (over UART) i see, that there is no 802.1q Support on Network
(the message "8021q: adding VLAN 0 to HW filter on device eth0" is not shown)
Thank you for the information. I'll try it recompiling the kernel. On Openwrt 19.07.4 everything works fine with vlan and this board, but on 19.07.5 it doesn't work