This will not happen. 19.07 is the last release for 4/32 devices.
If you want to use 4/32 devices in the future with OpenWrt, you are either dependent on community builds, or you need to build your own image.
Please team up with a lot of people and maintain your own OpenWrt build for 4/32 devices for the next 10 years.
Sorry that I can not give you a better answer. The 4/32 issue has been discussed for 2 years, and decision has been taken that 19.07 will be the last release for them; no way back.
I'm confused. I am aware that 19.07 is the last release for 4/32 devices. I've read the reasons for this decision. And that's exactly what we intend to do: give these 4/32 devices official support on 19.07, not after. We do know that they work with 19.07. We just want to make it official. But why do you say that this will not happen? We do not expect them to work after 19.07.
Edit: I'm considering 19.07.1, 19.07.2 and 19.07.3 as part of 19.07.
19.07.x has been branched off, it's done and dusted, aside from targetted bugfixes. Don't expect to introduce large structural changes to its code base anymore, development happens on the master branch, not stable releases. If a device isn't present in this release, chances that it will be re-introduced in future -stable updates are minimal to non-existent, this should have been done before openwrt-19.07 was branched off a year ago - or will have to wait for openwrt-20.xy (in terms of 4/32 devices this isn't going to happen anymore, you can still provide patches to introduce device support (so build it yourself), but you won't get prebuilt images for them).
Hi can someone build for me one firmware for my tl-wa850re v2 ?
I flashed it with the firmware for the tl-wr841 v10 who has the same soc and it seems working but not too good can someone help me ?
TL-WA850RE v2 has a problem with the overlay size Devices with Image too big to save overlay
Until someone come up with a fix for it there is no way around to build a 19.07 image.
Sorry, but they appear not ported from ar71xx architecture, that's been deprecated. Unfortunately 941n v5 hardware looks different to v4 or v6 according to TOH page, so I can't recommend you to flash any of these these either.
Installed on wr841nd v11, but have problems with DHCP, one client connected everything fine, when second client connects via wifi, it does not get IP address and first device loses internet connection.
Hello, is it recommended to use this build on a TL-WR941ND v3.2? There is no file for v3 available, but based on the comment below written on Feb 17, can I safely use the upgrade file for TL-WR941-v2?
"Yesterday I tried another image to flash - the device was TL-WR941ND v3.6. Although it reported back as incompatible, I successfully flashed the TL-WR941-v2/v3 version over it using CLI with force. The device compatibility ID changed as v2 and v3 were identical."
Thanks, I was able to flash "openwrt-ath79-tiny-tplink_tl-wr941-v2-squashfs-sysupgrade.bin" via the web interface over ethernet (and making sure not to keep prior configuration) with no issues. Thanks a lot for the quick response and for your work on this!
