OP24 install on a GL.iNET Flint 2 (GL-MT6000) with keeping/copying some settings

[MilesTEG1]

@phinn

damn that’s fast

Yeah
In France, ISP offers super speed My previous ISP gave me 5 Gbps, but, only one 2,5 Gbps port, and some old wifi 5 I could however use the 2.5Gbps fully on one port with the Flint2

@phinn

I would skip using any sort of SQM

Ok for SQM, what I read agrees with your advice
What do you mean with you would need something like an N100 box for that anyway. ?

@phinn

If you do other services on the router (like I use ksmbd, adblock, etc.) also enable packet steering and irqbalance. These are common tweaks

I may use AdGuard Home, but more surely I'll use Crowdsec and fail2ban. and maybe BanIP if I understand how to use it to block incoming request from all IP except FR ones.
So, OK fot that too: packet steering and irqbalance.

@phinn

At the very least the one for our target MT6000.

I already read that page

And I see the custom build: MT6000 custom build with LuCi and some optimization - kernel 6.6.x
It may be interresting to use it, but I don't know how to install it