Hello. I have a Fritzbox 7490 which is connected to Internet and with IP-range 192.10.30.0. In my other room i have a FritzBox4040 that has 4 LAN Ports with OpenWRT23.05.6. It is per wifi connected with the 7490.
I have seperated the LAN´s and configured LAN1 + LAN2 with static IP-range 192.10.40.1, LAN3 with static IP-range 192.10.45.1 and LAN4 for emergency connecting with IP-range 192.10.50.1.
I just want to use the LAN ports, no wifi.
I want LAN1+LAN2 to tunnel via wireguard with NordVPN to internet. LAN3 should connected directly to internet. And LAN4 stays as emergency connection.
Can somebody tell me how to manage this? Or send some links with the tut? I found here some threats for connecting via wireguard, but then my LAN3 has no internet. And i am noob and didn´t understand these settings, so need explizit order.
I configured it for my need, my lan1+lan2 acts like the “guest” with wireguard and lan3 is directly connected to internet.
But now i have the problem, that lan1+lan2 has no access to router or homenetwork. How can i solve this? Is it a firewall problem? What configs should i post?
Please connect to your OpenWrt device using ssh and copy the output of the following commands and post it here using the "Preformatted text </> " button (red circle; this works best in the 'Markdown' composer view in the blue oval):
Remember to redact passwords, VPN keys, MAC addresses and any public IP addresses you may have:
After fighting the hole night, i found out that PBR is for my constellation the best thing and resettet and reconfigured my FritzBox4040 with OpenWRT.
I had problems to run the pbr app on my FritzBox4040, but after finding the Netifd integration i managed it to work. From now i can set what i want to tunnel or to go directly. And it works great!!
