Mullvad Wireguard Installation - No handshake

[psherman]

This is not going to work:

@chinahasan

root@OpenWrt:~# cat /etc/config/wireless

config wifi-device 'radio0'
        option type 'mac80211'
        option path 'platform/soc/20300000.mmcnr/mmc_host/mmc1/mmc1:0001/mmc1:0001:1'
        option channel '1'
        option band '2g'
        option htmode 'HT20'
        option country 'CN'
        option cell_density '0'

config wifi-iface 'default_radio0'
        option device 'radio0'
        option network 'lan'
        option mode 'ap'
        option ssid 'Openwrt-Pizero'
        option encryption 'psk2'
        option key 'redact'

config wifi-iface 'wifinet3'
        option device 'radio0'
        option mode 'sta'
        option ssid 'redact'
        option encryption 'psk2'
        option key 'redact'
        option network 'wan'

The pi WiFi hardware doesn’t support simultaneous sta and AP modes. Further, the sta mode connection is associated with the wan network, but that interface is set to use eth0, not wireless.

You will need two physical interfaces - either WiFi + Ethernet or two WiFi devices.