MT6000 custom build with LuCi and some optimization - kernel 6.6.x

[_FailSafe]

@pesa1234 When you have a moment, would you mind taking a look at this test and see if you agree that enabling WED by default may not be the most ideal configuration due to its impact on AQL?

GL.iNet GL-MT6000 - AQL and WiFi Latency

I just re-ran a test at aql_txq_limit = 1500 with WED enabled and then again with WED disabled: aql_txq_limit 1500 + WED Enabled: [AQL1500-WED-Enabled] aql_txq_limit 1500 + WED Disabled: [AQL1500-WED-Disabled] There is undoubtedly much tighter control on latency with WED disabled--far fewer excursions from a baseline, though still more excursions into higher latency than I would prefer to see.