LuCI - Enable TFTP server

Installing and Using OpenWrt
1

Hi,

Model: TP-Link TL-MR3020 v3
Architecture: MediaTek MT7628AN ver:1 eco:2
Target Platform: ramips/mt76x8
Firmware Version: OpenWrt 21.02.5 r16688-fa9a932fdb /
LuCI openwrt-21.02 branch git-22.288.45155-afd0012
Kernel Version : 5.4.215

I guess that below setting means that if not enabled,
TFTP client won't be ready for u-boot TFTP firmware flash.

Network --> DHCP and DNS --> TFTP Settings --> Enable TFTP server

Leaving it disable by default is understandable with security reasons. However, is there a cure for caught disabled serious problem which necessitates flash recovery.

Regards. Thank you.
Safak Kayhan

2

Just a bad guess.

1 Like
3

Hi, you are right, I remembered wrong:

Thank you, regards.
Safak Kayhan

4

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.