Hi efahl, not that many actually. I have around 100Gbytes free out of 120, so I don’t think it is a free space issue.
Thank you
Hi! I got a notification stating that I could upgrade from 2025.12 rc2 to rc5. On a tp-link c2600.
When doing the attended sysupgrade, I’m greeted with the following error:
—
Server response: Unsupported target: ipq806x/generic. The requested target was either dropped, is still being built or is not supported by the selected version. Please check the forums or try again later.
Request Data
{
"system_board": {
"kernel": "6.12.63",
"hostname": "network-ap2",
"system": "ARMv7 Processor rev 0 (v7l)",
"model": "TP-Link Archer C2600",
"board_name": "tplink,c2600",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "25.12.0-rc2",
"firmware_url": "https://downloads.openwrt.org/",
"revision": "r32429-d76c64ad00",
"target": "ipq806x/generic",
"description": "OpenWrt 25.12.0-rc2 r32429-d76c64ad00",
"builddate": "1767653330"
}
},
"advanced_mode": "0",
"url": "https://sysupgrade.openwrt.org",
"branch": "25.12",
"revision": "r32429-d76c64ad00",
"efi": null,
"sha256_unsigned": "",
"client": "luci/26.005.68623~6984d4d",
"packages": {
"apk-mbedtls": "3.0.2-r1",
"ath10k-firmware-qca99x0-ct": "2023.04.04-r1",
"attendedsysupgrade-common": "9",
"base-files": "1682~d76c64ad00",
"busybox": "1.37.0-r6",
"ca-bundle": "20250419-r2",
"cgi-io": "2025.12.11~658b14bd-r1",
"dnsmasq": "2.91-r2",
"dropbear": "2025.89-r1",
"firewall4": "2025.03.17~b6e51575-r1",
"fstools": "2025.10.03~12858e28-r1",
"fwtool": "2025.10.03~04cd252e-r1",
"getrandom": "2025.10.30~6f78fa49-r1",
"hostapd-common": "2025.08.26~ca266cc2-r1",
"iw": "6.17-r1",
"jansson": "2.14.1-r1",
"jshn": "2025.12.08~7928f171-r1",
"jsonfilter": "2025.10.04~f4fe702d-r1",
"kernel": "6.12.63~9eda75d4fba9e574eade1ab68f0a9f2a-r1",
"kmod-ata-ahci": "6.12.63-r1",
"kmod-ata-ahci-platform": "6.12.63-r1",
"kmod-ata-core": "6.12.63-r1",
"kmod-ath": "6.12.63.6.18-r1",
"kmod-ath10k-ct": "6.12.63.2025.12.01~bb84e159-r1",
"kmod-cfg80211": "6.12.63.6.18-r1",
"kmod-crypto-aead": "6.12.63-r1",
"kmod-crypto-ccm": "6.12.63-r1",
"kmod-crypto-cmac": "6.12.63-r1",
"kmod-crypto-crc32c": "6.12.63-r1",
"kmod-crypto-ctr": "6.12.63-r1",
"kmod-crypto-gcm": "6.12.63-r1",
"kmod-crypto-geniv": "6.12.63-r1",
"kmod-crypto-gf128": "6.12.63-r1",
"kmod-crypto-ghash": "6.12.63-r1",
"kmod-crypto-hash": "6.12.63-r1",
"kmod-crypto-hmac": "6.12.63-r1",
"kmod-crypto-manager": "6.12.63-r1",
"kmod-crypto-null": "6.12.63-r1",
"kmod-crypto-rng": "6.12.63-r1",
"kmod-crypto-seqiv": "6.12.63-r1",
"kmod-crypto-sha3": "6.12.63-r1",
"kmod-crypto-sha512": "6.12.63-r1",
"kmod-gpio-button-hotplug": "6.12.63-r5",
"kmod-hwmon-core": "6.12.63-r1",
"kmod-i2c-core": "6.12.63-r1",
"kmod-leds-gpio": "6.12.63-r1",
"kmod-lib-crc-ccitt": "6.12.63-r1",
"kmod-lib-crc32c": "6.12.63-r1",
"kmod-mac80211": "6.12.63.6.18-r1",
"kmod-nf-conntrack": "6.12.63-r1",
"kmod-nf-conntrack6": "6.12.63-r1",
"kmod-nf-flow": "6.12.63-r1",
"kmod-nf-log": "6.12.63-r1",
"kmod-nf-log6": "6.12.63-r1",
"kmod-nf-nat": "6.12.63-r1",
"kmod-nf-reject": "6.12.63-r1",
"kmod-nf-reject6": "6.12.63-r1",
"kmod-nfnetlink": "6.12.63-r1",
"kmod-nft-core": "6.12.63-r1",
"kmod-nft-fib": "6.12.63-r1",
"kmod-nft-nat": "6.12.63-r1",
"kmod-nft-offload": "6.12.63-r1",
"kmod-nls-base": "6.12.63-r1",
"kmod-phy-qcom-ipq806x-usb": "6.12.63-r1",
"kmod-ppp": "6.12.63-r1",
"kmod-pppoe": "6.12.63-r1",
"kmod-pppox": "6.12.63-r1",
"kmod-ramoops": "6.12.63-r1",
"kmod-scsi-core": "6.12.63-r1",
"kmod-slhc": "6.12.63-r1",
"kmod-usb-common": "6.12.63-r1",
"kmod-usb-core": "6.12.63-r1",
"kmod-usb-dwc3": "6.12.63-r1",
"kmod-usb-dwc3-qcom": "6.12.63-r1",
"kmod-usb-ehci": "6.12.63-r1",
"kmod-usb-ledtrig-usbport": "6.12.63-r1",
"kmod-usb-ohci": "6.12.63-r1",
"kmod-usb-roles": "6.12.63-r1",
"kmod-usb-xhci-hcd": "6.12.63-r1",
"kmod-usb2": "6.12.63-r1",
"kmod-usb3": "6.12.63-r1",
"libblobmsg-json": "2025.12.08~7928f171-r1",
"libc": "1.2.5-r5",
"libgcc": "14.3.0-r5",
"libiwinfo-data": "2025.11.29~2ebef3da-r1",
"libiwinfo": "2025.11.29~2ebef3da-r1",
"libjson-c": "0.18-r1",
"libjson-script": "2025.12.08~7928f171-r1",
"liblucihttp-ucode": "2023.03.15~9b5b683f-r1",
"liblucihttp": "2023.03.15~9b5b683f-r1",
"libmbedtls": "3.6.5-r1",
"libmnl": "1.0.5-r1",
"libnftnl": "1.3.1-r1",
"libnl-tiny": "2025.12.02~40493a65-r1",
"libubox": "2025.12.08~7928f171-r1",
"libubus": "2025.12.02~3cc98db1-r1",
"libuci": "2025.12.02~66127cd7-r1",
"libuclient": "2025.10.03~dc909ca7-r1",
"libucode": "2025.12.01~f7c2b97a-r1",
"libudebug": "2025.10.21~75f39cd4",
"libustream-mbedtls": "2025.10.03~5a81c108-r1",
"logd": "2025.10.30~6f78fa49-r1",
"luci": "26.005.68623~6984d4d",
"luci-app-attendedsysupgrade": "26.005.68623~6984d4d",
"luci-app-dawn": "26.009.16151~a4e8af9",
"luci-app-dcwapd": "26.009.16151~a4e8af9",
"luci-app-filemanager": "26.009.16151~a4e8af9",
"luci-app-firewall": "26.005.68623~6984d4d",
"luci-app-package-manager": "26.005.68623~6984d4d",
"luci-base": "26.005.68623~6984d4d",
"luci-lib-uqr": "26.005.68623~6984d4d",
"luci-light": "26.005.68623~6984d4d",
"luci-mod-admin-full": "26.005.68623~6984d4d",
"luci-mod-network": "26.005.68623~6984d4d",
"luci-mod-status": "26.005.68623~6984d4d",
"luci-mod-system": "26.005.68623~6984d4d",
"luci-proto-ipv6": "26.005.68623~6984d4d",
"luci-proto-ppp": "26.005.68623~6984d4d",
"luci-ssl": "26.005.68623~6984d4d",
"luci-theme-bootstrap": "26.005.68623~6984d4d",
"mtd": "27",
"netifd": "2025.10.20~777f5942-r1",
"nftables-json": "1.1.6-r1",
"odhcp6c": "2025.12.29~699cc615-r1",
"odhcpd-ipv6only": "2025.12.18~0779ee28-r1",
"openwrt-keyring": "2025.12.10~f0670054-r1",
"ppp": "2.5.2-r2",
"ppp-mod-pppoe": "2.5.2-r2",
"procd": "2025.10.04~3b3501ab-r1",
"procd-seccomp": "2025.10.04~3b3501ab-r1",
"procd-ujail": "2025.10.04~3b3501ab-r1",
"px5g-mbedtls": "11",
"rpcd": "2025.12.03~ffb9961c-r1",
"rpcd-mod-file": "2025.12.03~ffb9961c-r1",
"rpcd-mod-iwinfo": "2025.12.03~ffb9961c-r1",
"rpcd-mod-luci": "20240305-r1",
"rpcd-mod-rpcsys": "2025.12.03~ffb9961c-r1",
"rpcd-mod-rrdns": "20170710",
"rpcd-mod-ucode": "2025.12.03~ffb9961c-r1",
"ubi-utils": "2.3.0-r1",
"uboot-envtools": "2025.10-r1",
"ubox": "2025.10.30~6f78fa49-r1",
"ubus": "2025.12.02~3cc98db1-r1",
"ubusd": "2025.12.02~3cc98db1-r1",
"uci": "2025.12.02~66127cd7-r1",
"uclient-fetch": "2025.10.03~dc909ca7-r1",
"ucode": "2025.12.01~f7c2b97a-r1",
"ucode-mod-digest": "2025.12.01~f7c2b97a-r1",
"ucode-mod-fs": "2025.12.01~f7c2b97a-r1",
"ucode-mod-html": "1",
"ucode-mod-log": "2025.12.01~f7c2b97a-r1",
"ucode-mod-math": "2025.12.01~f7c2b97a-r1",
"ucode-mod-nl80211": "2025.12.01~f7c2b97a-r1",
"ucode-mod-rtnl": "2025.12.01~f7c2b97a-r1",
"ucode-mod-ubus": "2025.12.01~f7c2b97a-r1",
"ucode-mod-uci": "2025.12.01~f7c2b97a-r1",
"ucode-mod-uloop": "2025.12.01~f7c2b97a-r1",
"uhttpd": "2025.10.03~ebb92e6b-r1",
"uhttpd-mod-ubus": "2025.10.03~ebb92e6b-r1",
"urandom-seed": "3",
"urngd": "2025.10.03~f17e33d9-r1",
"usign": "2025.10.03~c4c72b1b-r1",
"wifi-scripts": "1.0-r1",
"wireless-regdb": "2025.10.07-r1",
"wpad-mbedtls": "2025.08.26~ca266cc2-r1",
"zlib": "1.3.1-r1"
},
"profile": "tplink,c2600",
"target": "ipq806x/generic",
"version": "25.12.0-rc2",
"diff_packages": true,
"filesystem": "squashfs",
"rootfs_size_mb": null
}
Server response: Unsupported target: mediatek/filogic. The requested target was either dropped, is still being built or is not supported by the selected version. Please check the forums or try again later.
Request Data
{
"system_board": {
"kernel": "6.12.66",
"hostname": "OpenWrt",
"system": "ARMv8 Processor rev 4",
"model": "GL.iNet GL-MT6000",
"board_name": "glinet,gl-mt6000",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "25.12.0-rc4",
"firmware_url": "https://downloads.openwrt.org/",
"revision": "r32534-12374d88b9",
"target": "mediatek/filogic",
"description": "OpenWrt 25.12.0-rc4 r32534-12374d88b9",
"builddate": "1769726182"
}
},
"advanced_mode": "0",
"url": "https://sysupgrade.openwrt.org",
"branch": "25.12",
"revision": "r32534-12374d88b9",
"efi": null,
"sha256_unsigned": "",
"client": "luci/26.034.70600~5a27324",
"packages": {
"acl": "2.3.2-r2",
"apk-mbedtls": "3.0.2-r2",
"base-files": "1688~12374d88b9",
"bash": "5.3-r2",
"busybox-selinux": "1.37.0-r6",
"ca-bundle": "20250419-r2",
"conntrack": "1.4.8-r1",
"coreutils-base64": "9.9-r2",
"coreutils-stat": "9.9-r2",
"diffutils": "3.10-r1",
"dnsmasq-full": "2.91-r2",
"dropbear": "2025.89-r1",
"dropbearconvert": "2025.89-r1",
"e2fsprogs": "1.47.3-r1",
"f2fsck": "1.16.0-r4",
"firewall4": "2025.03.17~b6e51575-r1",
"fitblk": "2",
"getrandom": "2025.10.30~6f78fa49-r1",
"haproxy": "3.2.9-r1",
"hostapd-common": "2025.08.26~ca266cc2-r1",
"ip-full": "6.18.0-r2",
"iwinfo": "2026.01.14~f5dd57a8-r1",
"jansson": "2.14.1-r1",
"jq": "1.8.1-r2",
"kernel": "6.12.66~60d938adcb727697d3015e4285d4c290-r1",
"kmod-crypto-acompress": "6.12.66-r1",
"kmod-crypto-aead": "6.12.66-r1",
"kmod-crypto-authenc": "6.12.66-r1",
"kmod-crypto-crc32c": "6.12.66-r1",
"kmod-crypto-hmac": "6.12.66-r1",
"kmod-crypto-hw-safexcel": "6.12.66-r1",
"kmod-crypto-sha1": "6.12.66-r1",
"kmod-crypto-sha256": "6.12.66-r1",
"kmod-gpio-button-hotplug": "6.12.66-r5",
"kmod-hwmon-core": "6.12.66-r1",
"kmod-leds-gpio": "6.12.66-r1",
"kmod-lib-crc-ccitt": "6.12.66-r1",
"kmod-lib-crc32c": "6.12.66-r1",
"kmod-lib-lzo": "6.12.66-r1",
"kmod-libphy": "6.12.66-r1",
"kmod-mt7915e": "6.12.66.2025.11.06~eb567bc7-r2",
"kmod-mt7986-firmware": "6.12.66.2025.11.06~eb567bc7-r2",
"kmod-nf-conntrack": "6.12.66-r1",
"kmod-nf-conntrack6": "6.12.66-r1",
"kmod-nf-flow": "6.12.66-r1",
"kmod-nf-log": "6.12.66-r1",
"kmod-nf-log6": "6.12.66-r1",
"kmod-nf-nat": "6.12.66-r1",
"kmod-nf-reject": "6.12.66-r1",
"kmod-nf-reject6": "6.12.66-r1",
"kmod-nfnetlink": "6.12.66-r1",
"kmod-nft-core": "6.12.66-r1",
"kmod-nft-fib": "6.12.66-r1",
"kmod-nft-nat": "6.12.66-r1",
"kmod-nft-offload": "6.12.66-r1",
"kmod-phy-aquantia": "6.12.66-r1",
"kmod-slhc": "6.12.66-r1",
"kmod-usb3": "6.12.66-r1",
"kmod-vrf": "6.12.66-r1",
"less": "685-r1",
"libc": "1.2.5-r5",
"libiwinfo": "2026.01.14~f5dd57a8-r1",
"libmbedtls": "3.6.5-r1",
"libmnl": "1.0.5-r1",
"libnftnl": "1.3.1-r1",
"libpthread": "1.2.5-r5",
"libuclient": "2025.10.03~dc909ca7-r2",
"libustream-mbedtls": "2025.10.03~5a81c108-r1",
"logd": "2025.10.30~6f78fa49-r1",
"luci": "26.034.70600~5a27324",
"luci-app-attendedsysupgrade": "26.034.70600~5a27324",
"luci-app-sqm": "26.034.70600~5a27324",
"luci-mod-admin-full": "26.034.70600~5a27324",
"luci-proto-wireguard": "26.034.70600~5a27324",
"luci-ssl": "26.034.70600~5a27324",
"mdns-repeater": "2023.12.16~f714ec4d-r1",
"mkf2fs": "1.16.0-r4",
"mt7986-wo-firmware": "20251125-r1",
"mtd": "27",
"odhcp6c": "2026.01.25~ee2949e3-r1",
"odhcpd-ipv6only": "2026.01.19~2e5068b9-r1",
"openssh-client": "10.2_p1-r1",
"openssh-server": "10.2_p1-r1",
"openssh-sftp-server": "10.2_p1-r1",
"owut": "2026.01.13~2526d84b-r1",
"procd-selinux": "2025.10.04~3b3501ab-r1",
"procd-ujail": "2025.10.04~3b3501ab-r1",
"px5g-mbedtls": "11",
"rpcd": "2025.12.03~ffb9961c-r1",
"rpcd-mod-file": "2025.12.03~ffb9961c-r1",
"rpcd-mod-iwinfo": "2025.12.03~ffb9961c-r1",
"rpcd-mod-ucode": "2025.12.03~ffb9961c-r1",
"selinux-policy": "2.8.4",
"tcpdump": "4.99.6-r1",
"tmux": "3.6a-r1",
"uboot-envtools": "2025.10-r1",
"uci": "2025.12.02~66127cd7-r1",
"uclient-fetch": "2025.10.03~dc909ca7-r2",
"ucode-mod-math": "2026.01.16~85922056-r1",
"uhttpd": "2025.10.03~ebb92e6b-r1",
"uhttpd-mod-ubus": "2025.10.03~ebb92e6b-r1",
"urandom-seed": "3",
"urngd": "2025.10.03~f17e33d9-r1",
"vim-fuller": "9.1.1918-r3",
"wpad-mbedtls": "2025.08.26~ca266cc2-r1",
"zsh": "5.9-r4"
},
"profile": "glinet,gl-mt6000",
"target": "mediatek/filogic",
"version": "25.12.0-rc4",
"diff_packages": true,
"filesystem": "squashfs"
}
1 Like
The -rc5 builds are only half done, so while they are ongoing, you will receive errors when you attempt to use ASU to upgrade to it.
1 Like
I wanted to update from Version 23.05.5 to 24.10.5, supposedly the latest release version.
My system has external drivers for my hardware. When compiling the packages for the update there is an error “Impossible package selection: missing (luci-proto-xmm, xmm-modem)“. The named packages are the driver for my 4G modem L860-GL.
These are the complete build messages:
{
"url": "https://sysupgrade.openwrt.org",
"branch": "23.05",
"revision": "r24106-10cc5fcd00",
"efi": {
"path": "/sys/firmware/efi",
"type": "directory",
"size": 0,
"mode": 16877,
"atime": 1771536390,
"mtime": 1771536390,
"ctime": 1771536390,
"inode": 6533,
"uid": 0,
"gid": 0
},
"advanced_mode": "0",
"request_hash": "c0b2df535baf0b10adcf56d3d39dc1bb38be19f388f113261a6ea714620ec49d",
"sha256_unsigned": "",
"client": "luci/git-25.222.75657-7ce34fe",
"packages": {
"openssh-sftp-server": "9.8p1-1",
"liblucihttp": "2023-03-15-9b5b683f-1",
"cgi-io": "2022-08-10-901b0f04-21",
"mkf2fs": "1.16.0-1",
"luci-app-mwan3": "git-24.346.66847-1bb28ba",
"opkg": "2022-02-24-d038e5b6-2",
"luci-app-opkg": "git-24.346.66847-1bb28ba",
"ubus": "2023-06-05-f787c97b-1",
"libuci": "2023-08-10-5781664d-1",
"kmod-ixgbe": "5.15.167-1",
"rpcd": "2023-07-01-c07ab2f9-1",
"busybox": "1.36.1-1",
"libiwinfo": "2023-07-01-ca79f641-1",
"kmod-nft-fib": "5.15.167-1",
"chat": "2.4.9.git-2021-01-04-4",
"kmod-nfnetlink": "5.15.167-1",
"kmod-crypto-hash": "5.15.167-1",
"kmod-nf-reject6": "5.15.167-1",
"nano": "8.3-1",
"bash": "5.2.15-1",
"luci-mod-system": "git-24.346.66847-1bb28ba",
"kmod-nf-flow": "5.15.167-1",
"libnl-tiny": "2023-07-27-bc92a280-1",
"kmod-lib-crc-ccitt": "5.15.167-1",
"px5g-mbedtls": "10",
"getrandom": "2022-08-13-4c7b720b-2",
"ucode-mod-ubus": "2024-07-11-1a8a0bcf-3",
"luci-theme-bootstrap": "git-24.346.66847-1bb28ba",
"kmod-pppoe": "5.15.167-1",
"libuuid": "2.39-2",
"kmod-pppox": "5.15.167-1",
"kmod-nf-reject": "5.15.167-1",
"procd-ujail": "2023-06-25-2db83655-2",
"base-files": "1562-r24106-10cc5fcd00",
"kmod-nf-nat": "5.15.167-1",
"kmod-input-core": "5.15.167-1",
"kmod-crypto-crc32c": "5.15.167-1",
"ucode-mod-uci": "2024-07-11-1a8a0bcf-3",
"partx-utils": "2.39-2",
"libustream-mbedtls": "2023-02-25-498f6e26-1",
"netifd": "2024-01-04-c18cc79d-2",
"libf2fs": "1.16.0-1",
"libsmartcols": "2.39-2",
"kmod-r8169": "5.15.167-1",
"firewall4": "2023-09-01-598d9fbb-1",
"pciutils": "3.10.0-1",
"kmod-mii": "5.15.167-1",
"dnsmasq": "2.90-2",
"procd": "2023-06-25-2db83655-2",
"usbutils": "014-1",
"ip6tables-nft": "1.8.8-2",
"ubusd": "2023-06-05-f787c97b-1",
"xmm-modem": "0.1.3-2",
"kmod-crypto-acompress": "5.15.167-1",
"rpcd-mod-ucode": "2023-07-01-c07ab2f9-1",
"ucode-mod-math": "2024-07-11-1a8a0bcf-3",
"kmod-lib-crc32c": "5.15.167-1",
"pkg-config": "0.29.2-3",
"tar": "1.34-2",
"luci-mod-status": "git-24.346.66847-1bb28ba",
"lsblk": "2.39-2",
"bluez-libs": "5.66-1",
"libmbedtls": "2.28.9-1",
"kmod-fs-vfat": "5.15.167-1",
"kmod-nft-nat": "5.15.167-1",
"kmod-usb2": "5.15.167-1",
"comgt": "0.32-35",
"luci-app-firewall": "git-24.346.66847-1bb28ba",
"grub2-efi": "2.06-5",
"libubus": "2023-06-05-f787c97b-1",
"libblkid": "2.39-2",
"libmnl": "1.0.5-1",
"jansson": "2.14-3",
"grub2-bios-setup": "2.06-5",
"gdbserver": "12.1-3",
"odhcp6c": "2023-05-12-bcd28363-20",
"iptables-nft": "1.8.8-2",
"fstools": "2023-02-28-bfe882d5-1",
"uclient-fetch": "2023-04-13-007d9454-1",
"uci": "2023-08-10-5781664d-1",
"grub2": "2.06-5",
"ucode-mod-fs": "2024-07-11-1a8a0bcf-3",
"luci-ssl": "git-24.346.66847-1bb28ba",
"dropbear": "2022.82-6",
"kmod-mt7921e": "5.15.167+2024-04-03-1e336a85-1",
"curl": "8.7.1-r1",
"kmod-nls-utf8": "5.15.167-1",
"libnftnl": "1.2.6-1",
"iwlwifi-firmware-ax210": "20230804-1",
"kmod-nls-cp437": "5.15.167-1",
"rpcd-mod-file": "2023-07-01-c07ab2f9-1",
"mtd": "26",
"odhcpd-ipv6only": "2023-10-24-d8118f6e-1",
"procd-seccomp": "2023-06-25-2db83655-2",
"wpa-supplicant": "2023-09-08-e5ccbfc6-8",
"kmod-mt7921-common": "5.15.167+2024-04-03-1e336a85-1",
"libjson-script": "2023-05-23-75a3b870-1",
"libiwinfo-data": "2023-07-01-ca79f641-1",
"ucode": "2024-07-11-1a8a0bcf-3",
"rpcd-mod-luci": "20240305-1",
"kmod-nf-log": "5.15.167-1",
"bluez-daemon": "5.66-1",
"urandom-seed": "3",
"luci-proto-ppp": "git-24.346.66847-1bb28ba",
"gcc": "12.3.0-5",
"libcomerr": "1.47.0-2",
"luci-mod-admin-full": "git-24.346.66847-1bb28ba",
"ppp": "2.4.9.git-2021-01-04-4",
"luci-base": "git-24.346.66847-1bb28ba",
"logd": "2022-08-13-4c7b720b-2",
"kmod-bluetooth": "5.15.167-1",
"kmod-nf-log6": "5.15.167-1",
"kmod-usb-net": "5.15.167-1",
"kmod-tg3": "5.15.167-1",
"kmod-usb-serial": "5.15.167-1",
"kmod-usb-net-cdc-ncm": "5.15.167-1",
"luci-proto-ipv6": "git-24.346.66847-1bb28ba",
"coreutils-sleep": "9.3-1",
"openwrt-keyring": "2022-03-25-62471e69-2",
"luci-app-attendedsysupgrade": "git-25.222.75657-7ce34fe",
"libext2fs": "1.47.0-2",
"jshn": "2023-05-23-75a3b870-1",
"nftables-json": "1.0.8-1",
"e2fsprogs": "1.47.0-2",
"kmod-e1000": "5.15.167-1",
"kmod-usb-acm": "5.15.167-1",
"attendedsysupgrade-common": "8",
"kmod-ppp": "5.15.167-1",
"kmod-nft-offload": "5.15.167-1",
"libss": "1.47.0-2",
"hostapd": "2023-09-08-e5ccbfc6-8",
"libjson-c": "0.16-3",
"uhttpd": "2023-06-25-34a8a74d-2",
"kmod-nf-conntrack": "5.15.167-1",
"usign": "2020-05-23-f1f65026-1",
"libblobmsg-json": "2023-05-23-75a3b870-1",
"coreutils-printenv": "9.3-1",
"bluez-utils": "5.66-1",
"file": "5.44-1",
"ca-bundle": "20230311-1",
"kmod-forcedeth": "5.15.167-1",
"libuclient": "2023-04-13-007d9454-1",
"kmod-nls-iso8859-1": "5.15.167-1",
"kmod-amd-xgbe": "5.15.167-1",
"ucode-mod-html": "1",
"luci": "git-24.346.66847-1bb28ba",
"fdisk": "2.39-2",
"kmod-nf-conntrack6": "5.15.167-1",
"luci-light": "git-24.346.66847-1bb28ba",
"libgcc": "12.3.0-4",
"libstdcpp": "12.3.0-4",
"kmod-lib-lzo": "5.15.167-1",
"ubox": "2022-08-13-4c7b720b-2",
"kmod-amazon-ena": "5.15.167-1",
"kernel": "5.15.167-1-59d1431675acc6823a33c7eb2323daeb",
"kmod-e1000e": "5.15.167-1",
"rpcd-mod-iwinfo": "2023-07-01-c07ab2f9-1",
"luci-mod-network": "git-24.346.66847-1bb28ba",
"kmod-nft-core": "5.15.167-1",
"libucode": "2024-07-11-1a8a0bcf-3",
"make": "4.4.1-1",
"kmod-button-hotplug": "5.15.167-3",
"kmod-nls-base": "5.15.167-1",
"uhttpd-mod-ubus": "2023-06-25-34a8a74d-2",
"kmod-iwlwifi": "5.15.167+6.1.110-1-1",
"fwtool": "2019-11-12-8f7fe925-1",
"jsonfilter": "2024-01-23-594cfa86-1",
"liblucihttp-ucode": "2023-03-15-9b5b683f-1",
"libubox": "2023-05-23-75a3b870-1",
"hostapd-common": "2023-09-08-e5ccbfc6-8",
"kmod-igb": "5.15.167-1",
"kmod-igc": "5.15.167-1",
"luci-proto-xmm": "git-24.159.14246-5a20226",
"kmod-bnx2": "5.15.167-1",
"kmod-mt7921-firmware": "5.15.167+2024-04-03-1e336a85-1",
"urngd": "2023-11-01-44365eb1-1",
"kmod-slhc": "5.15.167-1",
"rpcd-mod-rrdns": "20170710",
"ppp-mod-pppoe": "2.4.9.git-2021-01-04-4"
},
"profile": "default-string-default-string",
"target": "x86/64",
"version": "23.05.5",
"diff_packages": true,
"filesystem": "ext4"
}
Generate local signing keys...
Generate local certificate...
Package list missing or not up-to-date, generating it.
Building package index...
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/x86/64/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_core
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/x86/64/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/base/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_base
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/base/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/x86/64/kmods/6.6.119-1-484466e2719a743506c36b4bb2103582/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_kmods
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/x86/64/kmods/6.6.119-1-484466e2719a743506c36b4bb2103582/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/luci/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_luci
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/luci/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_packages
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/routing/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_routing
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/routing/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/telephony/Packages.gz
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/openwrt_telephony
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/x86_64/telephony/Packages.sig
Signature check passed.
Downloading file:packages/Packages
Updated list of available packages in /builder/build_dir/target-x86_64_musl/root-x86/../../../../builder/dl/imagebuilder
Downloading file:packages/Packages.sig
Signature check passed.
Collected errors:
* opkg_install_cmd: Cannot install package luci-proto-xmm.
* opkg_install_cmd: Cannot install package xmm-modem.
make[2]: *** [Makefile:234: package_install] Error 255
make[1]: *** [Makefile:171: _call_manifest] Error 2
make: *** [Makefile:349: manifest] Error 2
Traceback (most recent call last):
File "/app/.venv/lib/python3.14/site-packages/rq/worker.py", line 1439, in perform_job
return_value = job.perform()
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1318, in perform
self._result = self._execute()
~~~~~~~~~~~~~^^
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1376, in _execute
result = self.func(*self.args, **self.kwargs)
File "/app/asu/build.py", line 463, in build
result = _build(build_request, job)
File "/app/asu/build.py", line 282, in _build
report_error(job, check_package_errors(job.meta["stderr"]))
~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/app/asu/util.py", line 332, in report_error
raise RuntimeError(msg)
RuntimeError: Impossible package selection: missing (luci-proto-xmm, xmm-modem)
Please advice how to proceed…
Thank you Dieter
Those packages come from outside OpenWrt's official feeds, so the ASU server can't find them. If you want to use any of the ASU clients (LuCI Attended Sysupgrade, Firmware Selector, auc or owut) to upgrade, you'll have to manually uninstall them and then re-install them after the upgrade.
EDIT
Here's an example of how one user deals with "foreign" packages: Owut: OpenWrt Upgrade Tool - #997 by el_charlie
1 Like
@efahl Thank you! That was, what I was looking for. Just didn’t find it.
I’ll try it this way…
Dieter
I don’t find what the error is:
Error building the firmware image
First, check this forum thread. If you don't find a solution there, then report all of the information below.
Server response: [object Object]
Request Data:
{
"system_board": {
"kernel": "6.6.119",
"hostname": "wnr3500",
"system": "Broadcom BCM4716",
"model": "Netgear WNR3500L",
"board_name": "0x04CF:3500",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "24.10.5",
"revision": "r29087-d9c5716d1d",
"target": "bcm47xx/mips74k",
"description": "OpenWrt 24.10.5 r29087-d9c5716d1d",
"builddate": "1766005702"
}
},
"advanced_mode": "1",
"url": "https://sysupgrade.openwrt.org",
"branch": "24.10",
"revision": "r29087-d9c5716d1d",
"efi": null,
"sha256_unsigned": "",
"client": "luci/26.043.84860~6cf8bf9",
"packages": {
"libc": "1.2.5-r4",
"opkg": "2024.10.16~38eccbb1-r1",
"wpad-basic-mbedtls": "2024.09.15~5ace39b0-r2",
"nano": "8.7-r1",
"swconfig": "12",
"procd-ujail": "2024.12.22~42d39376-r1",
"base-files": "1668~d9c5716d1d",
"libustream-mbedtls": "2024.07.28~99bd3d2b-r1",
"firewall4": "2024.12.18~18fc0ead-r1",
"kmod-usb-ohci": "6.6.119-r1",
"dnsmasq": "2.90-r4",
"kmod-usb2": "6.6.119-r1",
"odhcp6c": "2024.09.25~b6ae9ffa-r1",
"uci": "2025.01.20~16ff0bad-r1",
"dropbear": "2024.86-r2",
"mtd": "26",
"odhcpd-ipv6only": "2025.10.02~b14cf98c-r2",
"nvram": "12",
"urandom-seed": "3",
"otrx": "2024.10.16~88fbd526-r1",
"ppp": "2.5.1-r1",
"kmod-leds-gpio": "6.6.119-r1",
"kmod-gpio-button-hotplug": "6.6.119-r5",
"logd": "2024.04.26~85f10530-r1",
"luci-app-attendedsysupgrade": "26.043.84860~6cf8bf9",
"ca-bundle": "20250419-r1",
"kmod-b43": "6.6.119.6.12.61-r1",
"luci": "26.030.72349~cfd9f87",
"kernel": "6.6.119~cb0cb4fce08c64bf83a8361651a3c8ed-r1",
"urngd": "2023.11.01~44365eb1-r1",
"ppp-mod-pppoe": "2.5.1-r1"
},
"profile": "0x04CF:3500",
"target": "bcm47xx/mips74k",
"version": "24.10.5",
"diff_packages": true,
"filesystem": "squashfs",
"rootfs_size_mb": null
}
There's not enough to go on here, could you try again and see if there's an error message of some sort?
I’m running 25.12.0-rc4 on a Netgear GS108Tv3 and if I’m starting attended sysupgrade on Luci with Button “Search for firmware upgrade” I get the message “Searching for…” but nothing happening.
Same issue I had also with other devices and 24.10.x. What works is owut on all of this devices.
Any idea what’s going wrong?
Could you pop up your browser's debugger and see more details about where it's stalling? Usually F12 will do it, then look at the "Network" tab to see the transactions.
Thanks for the hint. It was indeed a beginners fault. My uMatrix addon blocked the script execution. After it was disabled, everything worked fine. Thanks again for your qualified support!
1 Like
Has the target tplink,eap235-wall-v1 indeed been dropped? I can still find images for 24.10.5, but none after that (24.10.12 ff.) on https://firmware-selector.openwrt.org/?version=24.10.5&target=ramips%2Fmt7621&id=tplink_eap235-wall-v1
Server response: Unsupported profile: tplink_eap235-wall-v1. The requested profile was either dropped or never existed. Please check the forums for more information.
Request Data:
{
"system_board": {
"kernel": "6.6.119",
"hostname": "tiggernet-ap-downstairs",
"system": "MediaTek MT7621 ver:1 eco:3",
"model": "TP-Link EAP235-Wall v1",
"board_name": "tplink,eap235-wall-v1",
"rootfs_type": "squashfs",
"release": {
"distribution": "OpenWrt",
"version": "24.10.5",
"revision": "r29087-d9c5716d1d",
"target": "ramips/mt7621",
"description": "OpenWrt 24.10.5 r29087-d9c5716d1d",
"builddate": "1766005702"
}
},
"advanced_mode": "0",
"url": "https://sysupgrade.openwrt.org",
"branch": "24.10",
"revision": "r29087-d9c5716d1d",
"efi": null,
"sha256_unsigned": "",
"client": "luci/26.018.23477~95628f1",
"packages": {
"iwinfo": "2024.10.20~b94f066e-r1",
"liblucihttp": "2023.03.15~9b5b683f-r1",
"cgi-io": "2022.08.10~901b0f04-r21",
"libc": "1.2.5-r4",
"opkg": "2024.10.16~38eccbb1-r1",
"wpad-basic-mbedtls": "2024.09.15~5ace39b0-r2",
"kmod-lib-crc-ccitt": "6.6.119-r1",
"ucode-mod-uloop": "2025.07.18~3f64c808-r1",
"getrandom": "2024.04.26~85f10530-r1",
"kmod-pppoe": "6.6.119-r1",
"procd-ujail": "2024.12.22~42d39376-r1",
"base-files": "1668~d9c5716d1d",
"kmod-mt7615e": "6.6.119.2025.11.06~eb567bc7-r1",
"libustream-mbedtls": "2024.07.28~99bd3d2b-r1",
"firewall4": "2024.12.18~18fc0ead-r1",
"dnsmasq": "2.90-r4",
"kmod-crypto-acompress": "6.6.119-r1",
"libmbedtls": "3.6.5-r1",
"odhcp6c": "2024.09.25~b6ae9ffa-r1",
"uci": "2025.01.20~16ff0bad-r1",
"luci-ssl": "26.018.23477~95628f1",
"dropbear": "2024.86-r2",
"mtd": "26",
"odhcpd-ipv6only": "2025.10.02~b14cf98c-r2",
"urandom-seed": "3",
"ppp": "2.5.1-r1",
"kmod-leds-gpio": "6.6.119-r1",
"kmod-gpio-button-hotplug": "6.6.119-r5",
"logd": "2024.04.26~85f10530-r1",
"kmod-mt7603": "6.6.119.2025.11.06~eb567bc7-r1",
"kmod-mt7663-firmware-ap": "6.6.119.2025.11.06~eb567bc7-r1",
"luci-app-attendedsysupgrade": "26.018.23477~95628f1",
"kmod-ppp": "6.6.119-r1",
"ca-bundle": "20250419-r1",
"libuclient": "2024.10.22~88ae8f20-r1",
"luci": "26.018.23477~95628f1",
"kmod-lib-lzo": "6.6.119-r1",
"kernel": "6.6.119~6c0cbfffdf5543d41b1de30e3a9c928d-r1",
"liblucihttp-ucode": "2023.03.15~9b5b683f-r1",
"hostapd-common": "2024.09.15~5ace39b0-r2",
"urngd": "2023.11.01~44365eb1-r1",
"ppp-mod-pppoe": "2.5.1-r1"
},
"profile": "tplink,eap235-wall-v1",
"target": "ramips/mt7621",
"version": "24.10.5",
"diff_packages": true,
"filesystem": "squashfs",
"rootfs_size_mb": null
}
Trying an attended sysupgrade from 24.10.2 to 24.10.5 throws me some dependency errors.
I worked around this by using the advanced mode in sysupgrade and removing luci-ssl-openssl from the packages there.
Worth noting luci-ssl-openssl was not installed in the system at the time of getting the error. I should not have been able to get into this situation right?!
Request Data:
{
"url": "https://sysupgrade.openwrt.org",
"branch": "24.10",
"revision": "r28739-d9340319c6",
"efi": null,
"advanced_mode": "0",
"request_hash": "",
"sha256_unsigned": "",
"client": "luci/25.179.72978~e977ed6",
"packages": {
"luci-proto-wireguard": "25.179.72978~e977ed6",
"liblucihttp": "2023.03.15~9b5b683f-r1",
"cgi-io": "2022.08.10~901b0f04-r21",
"libc": "1.2.5-r4",
"opkg": "2024.10.16~38eccbb1-r1",
"kmod-usb-core": "6.6.93-r1",
"libiwinfo": "2024.10.20~b94f066e-r1",
"avahi-daemon-service-http": "0.8-r9",
"kmod-lib-crc-ccitt": "6.6.93-r1",
"getrandom": "2024.04.26~85f10530-r1",
"bind-host": "9.20.9-r2",
"kmod-pppoe": "6.6.93-r1",
"procd-ujail": "2024.12.22~42d39376-r1",
"base-files": "1660~d9340319c6",
"libustream-mbedtls": "2024.07.28~99bd3d2b-r1",
"ddns-scripts": "2.8.2-r64",
"luci-app-uhttpd": "25.245.48024~b8bc15b",
"firewall4": "2024.12.18~18fc0ead-r1",
"uboot-envtools": "2024.07-r1",
"dnsmasq": "2.90-r4",
"qrencode": "4.1.1-r1",
"kmod-crypto-acompress": "6.6.93-r1",
"screen": "4.9.1-r2",
"kmod-usb-ehci": "6.6.93-r1",
"kmod-mvsdio": "6.6.93-r1",
"luci-app-nut": "25.179.72978~e977ed6",
"ddns-scripts-noip": "2.8.2-r64",
"luci-app-ddns": "25.179.72978~e977ed6",
"kmod-usb2": "6.6.93-r1",
"luci-ssl-openssl": "25.231.61534~b47fce0",
"avahi-daemon-service-ssh": "0.8-r9",
"libmbedtls": "3.6.3-r1",
"odhcp6c": "2024.09.25~b6ae9ffa-r1",
"uci": "2025.01.20~16ff0bad-r1",
"luci-ssl": "25.179.72978~e977ed6",
"dropbear": "2024.86-r1",
"mtd": "26",
"odhcpd-ipv6only": "2024.05.08~a2988231-r1",
"urandom-seed": "3",
"ppp": "2.5.1-r1",
"logd": "2024.04.26~85f10530-r1",
"luci-app-attendedsysupgrade": "25.179.72978~e977ed6",
"kmod-ppp": "6.6.93-r1",
"uhttpd": "2025.07.06~7e64e8ba-r4",
"libuclient": "2024.10.22~88ae8f20-r1",
"luci": "25.179.72978~e977ed6",
"kmod-lib-lzo": "6.6.93-r1",
"kernel": "6.6.93~c2beeebc737f039660035bcd64c8131c-r1",
"acme-acmesh-dnsapi": "3.1.1-r1",
"kmod-nls-base": "6.6.93-r1",
"uhttpd-mod-ubus": "2025.07.06~7e64e8ba-r4",
"liblucihttp-ucode": "2023.03.15~9b5b683f-r1",
"nut-driver-usbhid-ups": "2.8.1-r2",
"iperf3": "3.17.1-r4",
"acme": "4.0.0",
"luci-app-acme": "25.231.61534~b47fce0",
"urngd": "2023.11.01~44365eb1-r1",
"ppp-mod-pppoe": "2.5.1-r1"
},
"profile": "cisco,on100",
"target": "kirkwood/generic",
"version": "24.10.2",
"diff_packages": true,
"filesystem": "squashfs",
"rootfs_size_mb": null
}
STDERR:
Generate local signing keys...
Generate local certificate...
Package list missing or not up-to-date, generating it.
Building package index...
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/kirkwood/generic/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_core
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/kirkwood/generic/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/base/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_base
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/base/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/kirkwood/generic/kmods/6.6.119-1-c2beeebc737f039660035bcd64c8131c/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_kmods
Downloading http://downloads.openwrt.org/releases/24.10.5/targets/kirkwood/generic/kmods/6.6.119-1-c2beeebc737f039660035bcd64c8131c/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/luci/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_luci
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/luci/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/packages/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_packages
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/packages/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/routing/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_routing
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/routing/Packages.sig
Signature check passed.
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/telephony/Packages.gz
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/openwrt_telephony
Downloading http://downloads.openwrt.org/releases/24.10.5/packages/arm_xscale/telephony/Packages.sig
Signature check passed.
Downloading file:packages/Packages
Updated list of available packages in /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/../../../../builder/dl/imagebuilder
Downloading file:packages/Packages.sig
Signature check passed.
Collected errors:
* check_data_file_clashes: Package libustream-openssl20201210 wants to install file /builder/build_dir/target-arm_xscale_musl_eabi/root-kirkwood/lib/libustream-ssl.so
But that file is already provided by package * libustream-mbedtls20201210
* opkg_install_cmd: Cannot install package luci-ssl-openssl.
make[2]: *** [Makefile:234: package_install] Error 255
make[1]: *** [Makefile:171: _call_manifest] Error 2
make: *** [Makefile:349: manifest] Error 2
Traceback (most recent call last):
File "/app/.venv/lib/python3.14/site-packages/rq/worker.py", line 1439, in perform_job
return_value = job.perform()
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1318, in perform
self._result = self._execute()
~~~~~~~~~~~~~^^
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1376, in _execute
result = self.func(*self.args, **self.kwargs)
File "/app/asu/build.py", line 463, in build
result = _build(build_request, job)
File "/app/asu/build.py", line 282, in _build
report_error(job, check_package_errors(job.meta["stderr"]))
~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/app/asu/util.py", line 332, in report_error
raise RuntimeError(msg)
RuntimeError: Impossible package selection: missing (luci-ssl-openssl) conflicts (libustream-mbedtls20201210, libustream-openssl20201210)
Yes, looks like it was dropped about 3 months ago, with explanation in the commit message:
Quite correct, you should not have gotten here, but... There are holes in opkg's solver and it appears you found one somehow. (More often it's an issue with a couple wpad-* packages that get installed in parallel, and they are only caught in the same way at upgrade.)
1 Like
Understood. Thanks for the help!
Just tried to play a bit with thisd feature. Obtained on (x86/64):
Error building the firmware image
STDOUT:
Checking 'true'... ok.
Checking 'false'... ok.
Checking 'working-make'... ok.
Checking 'case-sensitive-fs'... ok.
Checking 'proper-umask'... ok.
Checking 'perl-data-dumper'... ok.
Checking 'perl-findbin'... ok.
Checking 'perl-file-copy'... ok.
Checking 'perl-file-compare'... ok.
Checking 'perl-thread-queue'... ok.
Checking 'perl-ipc-cmd'... ok.
Checking 'tar'... ok.
Checking 'find'... ok.
Checking 'bash'... ok.
Checking 'xargs'... ok.
Checking 'patch'... ok.
Checking 'diff'... ok.
Checking 'cp'... ok.
Checking 'seq'... ok.
Checking 'awk'... ok.
Checking 'grep'... ok.
Checking 'egrep'... ok.
Checking 'getopt'... ok.
Checking 'realpath'... ok.
Checking 'stat'... ok.
Checking 'gzip'... ok.
Checking 'unzip'... ok.
Checking 'bzip2'... ok.
Checking 'wget'... ok.
Checking 'install'... ok.
Checking 'perl'... ok.
Checking 'python'... ok.
Checking 'python3'... ok.
Checking 'python3-distutils'... ok.
Checking 'python3-stdlib'... ok.
Checking 'file'... ok.
Checking 'which'... ok.
Checking 'ldconfig-stub'... ok.
Building images for x86 - Generic x86/64
Packages: apk-mbedtls attendedsysupgrade-common base-files block-mount busybox ca-bundle cgi-io containerd dnsmasq docker docker-compose dockerd dropbear e2fsprogs firewall4 fstools fwtool getrandom grub2 grub2-bios-setup grub2-efi jansson jshn jsonfilter kernel kmod-button-hotplug kmod-crypto-crc32c kmod-crypto-hash kmod-fs-vfat kmod-input-core kmod-lib-crc-ccitt kmod-lib-crc32c kmod-nf-conntrack kmod-nf-conntrack6 kmod-nf-flow kmod-nf-log kmod-nf-log6 kmod-nf-nat kmod-nf-reject kmod-nf-reject6 kmod-nfnetlink kmod-nft-core kmod-nft-fib kmod-nft-nat kmod-nft-offload kmod-nls-base kmod-nls-cp437 kmod-nls-iso8859-1 kmod-nls-utf8 kmod-ppp kmod-pppoe kmod-pppox kmod-slhc libblkid libblobmsg-json libc libcomerr libe2p libext2fs libf2fs libgcc libiwinfo libiwinfo-data libjson-c libjson-script liblucihttp liblucihttp-ucode libmbedtls libmnl libnftnl libnl-tiny libpthread librt libsmartcols libss libubox libubus libuci libuclient libucode libudebug libustream-mbedtls libuuid logd luci luci-app-attendedsysupgrade luci-app-dockerman luci-app-firewall luci-app-package-manager luci-base luci-lib-uqr luci-light luci-mod-admin-full luci-mod-network luci-mod-status luci-mod-system luci-proto-ipv6 luci-proto-ppp luci-ssl luci-theme-bootstrap mkf2fs mtd netifd nftables-json odhcp6c openwrt-keyring partx-utils ppp ppp-mod-pppoe procd procd-seccomp procd-ujail px5g-mbedtls rpcd rpcd-mod-file rpcd-mod-iwinfo rpcd-mod-luci rpcd-mod-rpcsys rpcd-mod-rrdns rpcd-mod-ucode runc ubox ubus ubusd uci uclient-fetch ucode ucode-mod-fs ucode-mod-html ucode-mod-log ucode-mod-math ucode-mod-ubus ucode-mod-uci ucode-mod-uloop uhttpd uhttpd-mod-ubus urandom-seed urngd usign zlib apk-mbedtls base-files ca-bundle dnsmasq dropbear e2fsprogs firewall4 fstools grub2-bios-setup kernel kmod-button-hotplug kmod-fs-vfat kmod-nft-offload libc libgcc libustream-mbedtls logd mkf2fs mtd netifd odhcp6c partx-utils ppp ppp-mod-pppoe procd-ujail uci uclient-fetch urandom-seed urngd "base-files=1690~482ba7230a" "libc=1.2.5-r5" "kernel=6.12.71~dad96e0b324e75e311f44d061391d208-r1"
OK: 0 B in 0 packages
Installing packages...
( 1/186) Installing libgcc1 (14.3.0-r5)
( 2/186) Installing libc (1.2.5-r5)
( 3/186) Installing libmbedtls21 (3.6.5-r1)
( 4/186) Installing libubox20260213 (2026.02.13~1aa36ee7-r1)
( 5/186) Installing libuclient20201210 (2026.02.20~7a0aa2e4-r1)
( 6/186) Installing uclient-fetch (2026.02.20~7a0aa2e4-r1)
( 7/186) Installing zlib (1.3.1-r1)
( 8/186) Installing apk-mbedtls (3.0.2-r5)
( 9/186) Installing libjson-c5 (0.18-r1)
( 10/186) Installing libblobmsg-json20260213 (2026.02.13~1aa36ee7-r1)
( 11/186) Installing libubus20251202 (2025.12.02~3cc98db1-r1)
( 12/186) Installing libuci20250120 (2025.12.02~66127cd7-r1)
( 13/186) Installing rpcd (2025.12.03~ffb9961c-r1)
( 14/186) Installing rpcd-mod-rpcsys (2025.12.03~ffb9961c-r1)
( 15/186) Installing attendedsysupgrade-common (9)
( 16/186) Installing busybox (1.37.0-r6)
( 17/186) Installing ubusd (2025.12.02~3cc98db1-r1)
( 18/186) Installing ubus (2025.12.02~3cc98db1-r1)
( 19/186) Installing ubox (2025.10.30~6f78fa49-r1)
( 20/186) Installing fstools (2026.02.15~8d377aa6-r1)
( 21/186) Installing fwtool (2025.10.03~04cd252e-r1)
( 22/186) Installing jsonfilter (2025.10.04~f4fe702d-r1)
( 23/186) Installing jshn (2026.02.13~1aa36ee7-r1)
( 24/186) Installing libnl-tiny1 (2025.12.02~40493a65-r1)
( 25/186) Installing libudebug (2026.01.16~875e1a7a)
( 26/186) Installing libucode20230711 (2026.01.16~85922056-r1)
( 27/186) Installing ucode (2026.01.16~85922056-r1)
( 28/186) Installing ucode-mod-fs (2026.01.16~85922056-r1)
( 29/186) Installing ucode-mod-ubus (2026.01.16~85922056-r1)
( 30/186) Installing ucode-mod-uci (2026.01.16~85922056-r1)
( 31/186) Installing ucode-mod-uloop (2026.01.16~85922056-r1)
( 32/186) Installing netifd (2026.02.26~cbb83a18-r1)
( 33/186) Installing openwrt-keyring (2025.12.10~f0670054-r1)
( 34/186) Installing libjson-script20260213 (2026.02.13~1aa36ee7-r1)
( 35/186) Installing procd (2025.10.04~3b3501ab-r1)
( 36/186) Installing procd-seccomp (2025.10.04~3b3501ab-r1)
( 37/186) Installing usign (2025.10.03~c4c72b1b-r1)
( 38/186) Installing base-files (1690~482ba7230a)
( 39/186) Installing block-mount (2026.02.15~8d377aa6-r1)
( 40/186) Installing ca-bundle (20250419-r2)
( 41/186) Installing cgi-io (2025.12.11~658b14bd-r1)
( 42/186) Installing kernel (6.12.71~dad96e0b324e75e311f44d061391d208-r1)
( 43/186) Installing kmod-crypto-hash (6.12.71-r1)
( 44/186) Installing kmod-crypto-blake2b (6.12.71-r1)
( 45/186) Installing kmod-lib-xxhash (6.12.71-r1)
( 46/186) Installing kmod-crypto-xxhash (6.12.71-r1)
( 47/186) Installing kmod-crypto-crc32c (6.12.71-r1)
( 48/186) Installing kmod-lib-crc32c (6.12.71-r1)
( 49/186) Installing kmod-crypto-acompress (6.12.71-r1)
( 50/186) Installing kmod-lib-lzo (6.12.71-r1)
( 51/186) Installing kmod-lib-raid6 (6.12.71-r1)
( 52/186) Installing kmod-lib-xor (6.12.71-r1)
( 53/186) Installing kmod-lib-zlib-deflate (6.12.71-r1)
( 54/186) Installing kmod-lib-zlib-inflate (6.12.71-r1)
( 55/186) Installing kmod-lib-zstd (6.12.71-r1)
( 56/186) Installing kmod-fs-btrfs (6.12.71-r1)
( 57/186) Installing libattr (2.5.2-r3)
( 58/186) Installing libpthread (1.2.5-r5)
( 59/186) Installing librt (1.2.5-r5)
( 60/186) Installing libuuid1 (2.41.3-r1)
( 61/186) Installing libblkid1 (2.41.3-r1)
( 62/186) Installing liblzo2 (2.10-r5)
( 63/186) Installing libmount1 (2.41.3-r1)
( 64/186) Installing btrfs-progs (6.11-r3)
( 65/186) Installing libseccomp (2.5.5-r1)
( 66/186) Installing runc (1.1.14-r2)
( 67/186) Installing containerd (1.7.22-r2)
( 68/186) Installing dnsmasq (2.91-r2)
( 69/186) Installing docker (27.3.1-r2)
( 70/186) Installing docker-compose (2.40.3-r1)
( 71/186) Installing ca-certificates (20250419-r2)
( 72/186) Installing kmod-nf-ipt (6.12.71-r1)
( 73/186) Installing kmod-nf-log (6.12.71-r1)
( 74/186) Installing kmod-nf-reject (6.12.71-r1)
( 75/186) Installing kmod-ipt-core (6.12.71-r1)
( 76/186) Installing kmod-nf-log6 (6.12.71-r1)
( 77/186) Installing kmod-nf-ipt6 (6.12.71-r1)
( 78/186) Installing kmod-nf-reject6 (6.12.71-r1)
( 79/186) Installing kmod-ip6tables (6.12.71-r1)
( 80/186) Installing kmod-nf-conntrack (6.12.71-r1)
( 81/186) Installing kmod-nf-conntrack6 (6.12.71-r1)
( 82/186) Installing kmod-nf-nat (6.12.71-r1)
( 83/186) Installing kmod-nfnetlink (6.12.71-r1)
( 84/186) Installing kmod-nft-core (6.12.71-r1)
( 85/186) Installing kmod-nft-compat (6.12.71-r1)
( 86/186) Installing libxtables12 (1.8.10-r2)
( 87/186) Installing libiptext-nft0 (1.8.10-r2)
( 88/186) Installing libiptext0 (1.8.10-r2)
( 89/186) Installing libiptext6-0 (1.8.10-r2)
( 90/186) Installing libmnl0 (1.0.5-r1)
( 91/186) Installing libnftnl11 (1.3.1-r1)
( 92/186) Installing xtables-nft (1.8.10-r2)
( 93/186) Installing ip6tables-nft (1.8.10-r2)
( 94/186) Installing iptables-nft (1.8.10-r2)
( 95/186) Installing kmod-ipt-extra (6.12.71-r1)
( 96/186) Installing iptables-mod-extra (1.8.10-r2)
( 97/186) Installing kmod-ipt-nat (6.12.71-r1)
( 98/186) Installing kmod-ipt-conntrack (6.12.71-r1)
( 99/186) Installing kmod-nf-nat6 (6.12.71-r1)
(100/186) Installing kmod-ipt-nat6 (6.12.71-r1)
(101/186) Installing kmod-br-netfilter (6.12.71-r1)
(102/186) Installing kmod-ipt-physdev (6.12.71-r1)
(103/186) Installing kmod-nf-ipvs (6.12.71-r1)
(104/186) Installing kmod-veth (6.12.71-r1)
(105/186) Installing tini (0.19.0-r4)
(106/186) Installing kmod-nft-fib (6.12.71-r1)
(107/186) Installing kmod-nft-nat (6.12.71-r1)
(108/186) Installing kmod-nf-flow (6.12.71-r1)
(109/186) Installing kmod-nft-offload (6.12.71-r1)
(110/186) Installing jansson4 (2.14.1-r1)
(111/186) Installing nftables-json (1.1.6-r1)
(112/186) Installing firewall4 (2025.03.17~b6e51575-r1)
(113/186) Installing dockerd (27.3.1-r4)
(114/186) Installing dropbear (2025.89-r1)
(115/186) Installing libe2p2 (1.47.3-r1)
(116/186) Installing libcomerr0 (1.47.3-r1)
(117/186) Installing libss2 (1.47.3-r1)
(118/186) Installing libext2fs2 (1.47.3-r1)
(119/186) Installing e2fsprogs (1.47.3-r1)
(120/186) Installing getrandom (2025.10.30~6f78fa49-r1)
(121/186) Installing grub2 (2.12-r1)
(122/186) Installing grub2-bios-setup (2.12-r1)
(123/186) Installing grub2-efi (2.12-r1)
(124/186) Installing kmod-input-core (6.12.71-r1)
(125/186) Installing kmod-button-hotplug (6.12.71-r3)
(126/186) Installing kmod-nls-base (6.12.71-r1)
(127/186) Installing kmod-nls-cp437 (6.12.71-r1)
(128/186) Installing kmod-nls-iso8859-1 (6.12.71-r1)
(129/186) Installing kmod-nls-utf8 (6.12.71-r1)
(130/186) Installing kmod-fs-vfat (6.12.71-r1)
(131/186) Installing kmod-lib-crc-ccitt (6.12.71-r1)
(132/186) Installing kmod-slhc (6.12.71-r1)
(133/186) Installing kmod-ppp (6.12.71-r1)
(134/186) Installing kmod-pppox (6.12.71-r1)
(135/186) Installing kmod-pppoe (6.12.71-r1)
(136/186) Installing libf2fs6 (1.16.0-r4)
(137/186) Installing libiwinfo-data (2026.01.14~f5dd57a8-r1)
(138/186) Installing libiwinfo20230701 (2026.01.14~f5dd57a8-r1)
(139/186) Installing liblucihttp0 (2023.03.15~9b5b683f-r1)
(140/186) Installing liblucihttp-ucode (2023.03.15~9b5b683f-r1)
(141/186) Installing libsmartcols1 (2.41.3-r1)
(142/186) Installing libustream-mbedtls20201210 (2025.10.03~5a81c108-r1)
(143/186) Installing logd (2025.10.30~6f78fa49-r1)
(144/186) Installing rpcd-mod-file (2025.12.03~ffb9961c-r1)
(145/186) Installing rpcd-mod-luci (20240305-r1)
(146/186) Installing rpcd-mod-ucode (2025.12.03~ffb9961c-r1)
(147/186) Installing ucode-mod-html (1)
(148/186) Installing ucode-mod-log (2026.01.16~85922056-r1)
(149/186) Installing ucode-mod-math (2026.01.16~85922056-r1)
(150/186) Installing luci-base (26.058.03681~dbd2f1e)
(151/186) Installing luci-app-package-manager (26.058.03681~dbd2f1e)
(152/186) Installing luci-app-firewall (26.058.03681~dbd2f1e)
(153/186) Installing luci-lib-uqr (26.058.03681~dbd2f1e)
(154/186) Installing rpcd-mod-iwinfo (2025.12.03~ffb9961c-r1)
(155/186) Installing luci-mod-network (26.058.03681~dbd2f1e)
(156/186) Installing luci-mod-status (26.058.03681~dbd2f1e)
(157/186) Installing luci-mod-system (26.058.03681~dbd2f1e)
(158/186) Installing luci-mod-admin-full (26.058.03681~dbd2f1e)
(159/186) Installing luci-proto-ipv6 (26.058.03681~dbd2f1e)
(160/186) Installing luci-proto-ppp (26.058.03681~dbd2f1e)
(161/186) Installing luci-theme-bootstrap (26.058.03681~dbd2f1e)
(162/186) Installing rpcd-mod-rrdns (20170710)
(163/186) Installing uhttpd (2025.10.03~ebb92e6b-r1)
(164/186) Installing uhttpd-mod-ubus (2025.10.03~ebb92e6b-r1)
(165/186) Installing luci-light (26.058.03681~dbd2f1e)
(166/186) Installing luci (26.058.03681~dbd2f1e)
(167/186) Installing luci-app-attendedsysupgrade (26.058.03681~dbd2f1e)
(168/186) Installing libcap (2.69-r1)
(169/186) Installing libopenssl3 (3.5.5-r1)
(170/186) Installing libuv1 (1.48.0-r1)
(171/186) Installing libwebsockets-full (4.4.1-r1)
(172/186) Installing ttyd (1.7.7-r1)
(173/186) Installing ucode-mod-socket (2026.01.16~85922056-r1)
(174/186) Installing luci-app-dockerman (26.058.03681~dbd2f1e)
(175/186) Installing px5g-mbedtls (11)
(176/186) Installing luci-ssl (26.058.03681~dbd2f1e)
(177/186) Installing mkf2fs (1.16.0-r4)
(178/186) Installing mtd (27)
(179/186) Installing odhcp6c (2026.01.25~ee2949e3-r1)
(180/186) Installing partx-utils (2.41.3-r1)
(181/186) Installing ppp (2.5.2-r2)
(182/186) Installing ppp-mod-pppoe (2.5.2-r2)
(183/186) Installing procd-ujail (2025.10.04~3b3501ab-r1)
(184/186) Installing uci (2025.12.02~66127cd7-r1)
(185/186) Installing urandom-seed (3)
(186/186) Installing urngd (2025.10.03~f17e33d9-r1)
OK: 328.4 MiB in 186 packages
Finalizing root filesystem...
add alternative: /usr/bin/ssh-keygen -> /usr/sbin/dropbear
add alternative: /usr/bin/scp -> /usr/sbin/dropbear
add alternative: /usr/bin/ssh -> /usr/sbin/dropbear
add alternative: /usr/sbin/ip6tables -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-restore -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-save -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-nft -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-nft-restore -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-nft-save -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-restore-translate -> xtables-nft-multi
add alternative: /usr/sbin/ip6tables-translate -> xtables-nft-multi
add alternative: /usr/sbin/iptables -> xtables-nft-multi
add alternative: /usr/sbin/iptables-restore -> xtables-nft-multi
add alternative: /usr/sbin/iptables-save -> xtables-nft-multi
add alternative: /usr/sbin/iptables-nft -> xtables-nft-multi
add alternative: /usr/sbin/iptables-nft-restore -> xtables-nft-multi
add alternative: /usr/sbin/iptables-nft-save -> xtables-nft-multi
add alternative: /usr/sbin/iptables-restore-translate -> xtables-nft-multi
add alternative: /usr/sbin/iptables-translate -> xtables-nft-multi
add alternative: /sbin/logread -> /usr/libexec/logread-ubox
add alternative: /sbin/rmmod -> /sbin/kmodloader
add alternative: /sbin/insmod -> /sbin/kmodloader
add alternative: /sbin/lsmod -> /sbin/kmodloader
add alternative: /sbin/modinfo -> /sbin/kmodloader
add alternative: /sbin/modprobe -> /sbin/kmodloader
add alternative: /usr/bin/wget -> /bin/uclient-fetch
Enabling boot
Enabling cron
Enabling dnsmasq
Enabling dockerd
Enabling done
Enabling dropbear
Enabling firewall
Enabling fstab
Enabling gpio_switch
Enabling led
Enabling log
Enabling network
Enabling packet_steering
Enabling rpcd
Enabling sysctl
Enabling sysfixtime
Enabling sysntpd
Enabling system
Enabling ttyd
Enabling ucitrack
Enabling uhttpd
Enabling umount
Enabling urandom_seed
Enabling urngd
Building images...
Parallel mksquashfs: Using 16 processors
Creating 4.0 filesystem on /builder/build_dir/target-x86_64_musl/linux-x86_64/root.squashfs, block size 262144.
[| ] 0/2359 0%
[===================\ ] 800/2483 32%
[=================================================\ ] 2000/2483 80%
[===================================================| ] 2100/2483 84%
[=============================================================\] 2483/2483 100%
Exportable Squashfs 4.0 filesystem, xz compressed, data block size 262144
compressed data, compressed metadata, compressed fragments,
no xattrs, compressed ids
duplicates are removed
Filesystem size 91475.80 Kbytes (89.33 Mbytes)
27.18% of uncompressed filesystem size (336540.86 Kbytes)
Inode table size 16440 bytes (16.05 Kbytes)
26.00% of uncompressed inode table size (63241 bytes)
Directory table size 17626 bytes (17.21 Kbytes)
48.07% of uncompressed directory table size (36668 bytes)
Number of duplicate files found 21
Number of inodes 1657
Number of files 1117
Number of fragments 48
Number of symbolic links 413
Number of device nodes 1
Number of fifo nodes 0
Number of socket nodes 0
Number of directories 126
Number of hard-links 0
Number of ids (unique uids + gids) 1
Number of uids 1
unknown (0)
Number of gids 1
unknown (0)
Creating filesystem with parameters:
Size: 109051904
Block size: 4096
Blocks per group: 32768
Inodes per group: 6656
Inode size: 256
Journal blocks: 1024
Label: rootfs
Blocks: 26624
Block groups: 1
Reserved blocks: 0
Reserved block group size: 7
STDERR:
Pseudo file "dev" exists in source filesystem "/builder/build_dir/target-x86_64_musl/root-x86/dev".
Ignoring, exclude it (-e/-ef) to override.
error: ext4_allocate_best_fit_partial: failed to allocate 5948 blocks, out of space?
make[3]: *** [/builder/include/image.mk:426: /builder/build_dir/target-x86_64_musl/linux-x86_64/root.ext4] Error 1
make[2]: *** [Makefile:288: build_image] Error 2
make[1]: *** [Makefile:185: _call_image] Error 2
make: *** [Makefile:357: image] Error 2Traceback (most recent call last):
File "/app/.venv/lib/python3.14/site-packages/rq/worker.py", line 1439, in perform_job
return_value = job.perform()
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1318, in perform
self._result = self._execute()
~~~~~~~~~~~~~^^
File "/app/.venv/lib/python3.14/site-packages/rq/job.py", line 1376, in _execute
result = self.func(*self.args, **self.kwargs)
File "/app/asu/build.py", line 463, in build
result = _build(build_request, job)
File "/app/asu/build.py", line 327, in _build
report_error(job, "Selected packages exceed device storage")
~~~~~~~~~~~~^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
File "/app/asu/util.py", line 332, in report_error
raise RuntimeError(msg)
RuntimeError: Selected packages exceed device storage
That's a huge package, 137 MB, you'll need to increase your rootfs partition size to get it installed. See https://openwrt.org/docs/guide-user/installation/sysupgrade.owut#expanding_root_file_system, and since you're on x86, pay special attention to the warning at the top.
Those bcm47xx devices are sending cryptic board_names ("0x04CF:3500" in this case), there is a open PR, if you want to drop a comment there reporting your case. (" bcm47xx: base-files: hack sysinfo to allow ASU sysupgrades") https://github.com/openwrt/openwrt/pull/21147