Hi, I have an Archer C7 V5 with 21.02.01 connected to 2 routers from 2 different ISPs. Both are PON connections with fiber line speeds of 150Mbps each, connected to the Archer C7 v5 with Ethernet.
Currently, I have both configured with mwan3 load sharing which gives me 175Mbps average speed. I am trying to create an LACP connection to create a bonding that improves my speeds above 250Mbps for a single line of LAN.
Can anyone help me with setting this up!
I think there is some confusion here. The C7 has Gigabit ports, which is above the speed you want to achieve.
While it has 1000BASE-T ports, its performance would be insufficient to route at 1 GBit/s wirespeed. Aggregate routing performance on this ath79/ QCA9563 (750 MHz mips 64Kc) hardware will be around 200 MBit/s, less if you apply specialties like mwan3 that need more software control than plain routing.
--
load-balancing is 'difficult' and adds further side effects, which prevent you from using the aggregate line speed for a single task anyways.