Isolating wireless security camera's

Installing and Using OpenWrt
1

I bought some cheap wireless solar cams off aliexpress, and as far as I can tell, they are are not rtsp or onvif friendly. Only accessible through the eseecloud app. Tried running tcpdump to pull traffic to try to get a direct url of the camera feed, but I haven't been successful. Unless I can find a way to hack the firmware with something like OpenIPC, I'll need to isolate the cams.

I use Proxmox to vitualize OpenWRT [along with several other VM's] on a J4125 minipc w/ four 2.5Gbps ports, which sends traffic to several dumb AP's [all openwrt 25.12.2] via unmanaged 2.5Gbps switch to CAT6 drops throughout my home.

What's the best method to isolate the wireless security camera's, and still have remote access to them through the camera app?

image
image719×401 23 KB

2

In my opinion, the best way would be to create a dedicated network (controlled by the main router) using VLANs, but since your switch is unmanaged, there aren't many options.