it is not working now after route_alowed_ips '1'
i get this error cannot even access to interface luci panel
this is the actual config, what am i doing wrong, why it is not working ? 
config interface 'loopback'
option device 'lo'
option proto 'static'
option ipaddr '127.0.0.1'
option netmask '255.0.0.0'
config device
option name 'br-lan'
option type 'bridge'
list ports 'eth0'
config interface 'lan'
option device 'br-lan'
option proto 'static'
option ipaddr '192.168.1.1'
option netmask '255.255.255.0'
option ip6assign '60'
list dns '1.1.1.1'
list dns '1.1.1.2'
config device
option name 'eth1'
option ipv6 '0'
option igmpversion '3'
config interface 'wan'
option device 'eth1'
option proto 'dhcp'
option peerdns '0'
config interface 'wiro'
option proto 'wireguard'
option private_key 'e'
option peerdns '0'
list addresses '2606:4700:110:87e9:d16e:c246:7da0:7976/128'
list addresses '172.16.0.2/24'
list dns '1.1.1.1'
list dns '1.0.0.1'
config wireguard_wiro
option description 'wgcf-profile.conf'
option public_key '='
list allowed_ips '0.0.0.0/0,::/0'
option endpoint_host 'engage.cloudflareclient.com'
option endpoint_port '2408'
option persistent_keepalive '25'
option route_allowed_ips '1'
'
config route
option interface 'wiro'
option target '0.0.0.0/0'
option table '1'
config rule
option src '192.168.1.0/24'
option dest '0.0.0.0/0'
option priority '1'
# cat /etc/config/firewall
config defaults
option input 'ACCEPT'
option output 'ACCEPT'
option synflood_protect '1'
option forward 'DROP'
option drop_invalid '1'
config zone
option name 'lan'
option input 'ACCEPT'
option output 'ACCEPT'
option forward 'ACCEPT'
list network 'lan'
config zone
option name 'wan'
option output 'ACCEPT'
option masq '1'
option mtu_fix '1'
option input 'DROP'
option forward 'DROP'
list network 'wan'
list network 'wan6'
config rule
option name 'Allow-DHCP-Renew'
option src 'wan'
option proto 'udp'
option dest_port '68'
option target 'ACCEPT'
option family 'ipv4'
config rule
option name 'Allow-Ping'
option src 'wan'
option proto 'icmp'
option icmp_type 'echo-request'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-IGMP'
option src 'wan'
option proto 'igmp'
option family 'ipv4'
option target 'ACCEPT'
config rule
option name 'Allow-DHCPv6'
option src 'wan'
option proto 'udp'
option dest_port '546'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-MLD'
option src 'wan'
option proto 'icmp'
option src_ip 'fe80::/10'
list icmp_type '130/0'
list icmp_type '131/0'
list icmp_type '132/0'
list icmp_type '143/0'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Input'
option src 'wan'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
list icmp_type 'router-solicitation'
list icmp_type 'neighbour-solicitation'
list icmp_type 'router-advertisement'
list icmp_type 'neighbour-advertisement'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-ICMPv6-Forward'
option src 'wan'
option dest '*'
option proto 'icmp'
list icmp_type 'echo-request'
list icmp_type 'echo-reply'
list icmp_type 'destination-unreachable'
list icmp_type 'packet-too-big'
list icmp_type 'time-exceeded'
list icmp_type 'bad-header'
list icmp_type 'unknown-header-type'
option limit '1000/sec'
option family 'ipv6'
option target 'ACCEPT'
config rule
option name 'Allow-IPSec-ESP'
option src 'wan'
option dest 'lan'
option proto 'esp'
option target 'ACCEPT'
config rule
option name 'Allow-ISAKMP'
option src 'wan'
option dest 'lan'
option dest_port '500'
option proto 'udp'
option target 'ACCEPT'
config include 'bcp38'
option type 'script'
option path '/usr/lib/bcp38/run.sh'
config zone
option name 'warp'
option input 'DROP'
option output 'ACCEPT'
option forward 'DROP'
option masq '1'
option mtu_fix '1'
list network 'wiro'
config dnsmasq
list server '1.1.1.1'
config forwarding
option src 'lan'
option dest 'wan'
i am using this tutorial https://www.youtube.com/watch?v=MPRLKtXt_lQ
peer: =
endpoint: 162.159.192.5:2408
allowed ips: 0.0.0.0/0, ::/0
latest handshake: 22 seconds ago
transfer: 552 B received, 1.84 KiB sent
persistent keepalive: every 25 seconds
please help me out with this, if you have time and if you want , it will be helpful for the others, thanks