Does anyone here have a router with QCA9984 running on Trunk.
I have an issue where the 5GHZ AC is not transmitting when I added noscan = '1' it worked briefly
Dmesg looks ok
I verified that my hardware is fine by flashing back OEM factory firmware.
On OEM factory firmware both radios are fine, association,tx and rx works but on OpenWrt 5GHZ is not working.
I had tested a few months ago 5GHZ works fine on OpenWrt.
R7800, very popular here.
Works normally to my knowledge
I wouldn't be surprised that you encountered the brief period of ath10k-ct firmware files being corrupted (all zeroed due to disk failure on their server). As the hash didn't match, the necessary packages couldn't be built successfully and unavailable device_packages being ignored. If your problems are due to this issue, that should be fixed (but might have affected ~3 days worth of snapshot builds)
1 Like
[ 418.853107] device wlan0 left promiscuous mode
[ 418.857853] br-lan: port 3(wlan0) entered disabled state
[ 418.865709] ath10k_pci 0000:00:00.0: mac flush null vif, drop 0 queues 0xffff
[ 418.875201] ath10k_pci 0000:00:00.0: peer-unmap-event: unknown peer id 0
[ 418.882421] ath10k_pci 0000:00:00.0: peer-unmap-event: unknown peer id 0
[ 419.158195] device wlan1 left promiscuous mode
[ 419.163031] br-lan: port 2(wlan1) entered disabled state
[ 430.365845] ath10k_pci 0000:00:00.0: unsupported HTC service id: 1536
[ 430.372974] ath10k_pci 0000:00:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 430.380758] ath10k_pci 0000:00:00.0: msdu-desc: 2500 skid: 32
[ 430.462555] ath10k_pci 0000:00:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 430.473867] ath10k_pci 0000:00:00.0: wmi print 'free: 84936 iram: 13428 sram: 11224'
[ 430.859285] ath10k_pci 0000:00:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4