Ipv6 lan -> wan not working

Hello,

I trying to make ipv6 work from my local pc to the internet.
So far :
router ssh console -> internet : ipv6 ok (ping)
lan pc1 -> lan pc2 : ipv6 ok (ping)
lan pc -> internet : ko (ping)

I have no idea why the router isn't forwarding my ipv6 packets from lan to wan, should I put the LAN interface DHCPv6 server in relay mode ?

Does your clients get GUA (2000::/3) address?

Does your wan interface get prefix delegated from ISP?

Run ifstatus wan6, what is under ipv6-prefix section? Redact output reasonably.

No, a /128 one

Yes

Nothing...

Important is how does the address start? What is first two characters of the IP? /128 probably means that it was set via DHCPv6 it does not say if it's ULA or GUA address.

What about another iface, e.g. wan no prefix either?

If there is no prefix then ISP did not delegate prefix for you.

Please provide more detail in subsequent posts.

Yeah sorry, I don't know much about ipv6

It starts with fd2c:

Oh that's ULA address it's private range like 10.0.0.0/8 or 192.168.0.0/24. It's not routable to the internet.

What is your topology? Do you have OpenWrt connected to ISP router? Is the ISP router in bridge mode?

Has IPv6 ever worked on this connection, or is this a new IPv6 setup?

OpenWrt by default has ULA addrsses set up. They however work only locally, unless some additional steps are taken (masquerading/NAT66).

PCs (192.168.1.0/24) --- Openwrt ---- ISP router (192.168.0.0/24) --- Internet

Would it be possible to turn the ISP router to a "bridge mode"?

No, never worked (didn't try to make it work before tbh)

The ISP router is pretty well locked up, I only have access to the most basic functions :frowning:

You could ask ISP if they could switch it to a bridge mode for you.

Is it cable, DSL, fiber, Ethernet?

(I'm curious if the ISP device can be removed.)

I don't think that's something they do. I don't understand, why isn't openwrt able to forward the packets ? It's able to reach internet through ipv6 after all