IPv6 just quit working

[trendy]

@d-cubed

option type 'bridge'

Remove the bridge from wan and wan6. Also have a look here, he had the same issue with you.

Wan6 - Unknown error (DEVICE_CLAIM_FAILED)

Okay, something is very strange here. As a test, I temporarily set the protocol on WAN (eth0.2) to 'DHCPv6 client' instead of 'DHCP client' and restarted the interface. Thereafter, as expected, I pulled an IPv6 address via DHCP and could use ping6 as a test, BUT the IPv4 address was gone and I couldn't use ping4 (again, as expected). After then going back into the WAN (eth0.2) configuration and changing it back to 'DHCP client', I pull an IPv4 address on WAN and an IPv6 address on WAN6 (which…