Ipq806x images for 19.07 are missing

For Developers
1

I am seeing no images here. Is there an issue with build? Other targets seem to be fine.

2

Looks like a possible one-time upload error.

@jow
Looks like the 19.07 buildbot upload may fail silently and still show green at the buildbot overall status?

http://buildbot.openwrt.org/openwrt-19.07/images/builders/ipq806x%2Fgeneric/builds/31

That looks ok, but opening the log at
"[targetupload] Uploading target files ( 6 mins, 47 secs )"
reveals the upload error:

http://buildbot.openwrt.org/openwrt-19.07/images/builders/ipq806x%2Fgeneric/builds/31/steps/targetupload/logs/stdio

+ [[ -x /usr/bin/pv ]]
+ rsync --exclude=/kmods/ --files-from=rsynclist --delay-updates --partial-dir=.~tmp~ipq806x~generic -v -4 --timeout=120 --contimeout=20 -a bin/targets/ipq806x/generic/ upload@mirror-01.infra.openwrt.org::release-uploads/19.07-SNAPSHOT/targets/ipq806x/generic/
+ /usr/bin/pv -t -i 60 -f
building file list ... done
feeds.buildinfo
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-buffalo_wxr-2533dhp-initramfs-uImage
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-buffalo_wxr-2533dhp-squashfs-sysupgrade.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-compex_wpq864-initramfs-fit-uImage.itb
0:01:00
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-compex_wpq864-squashfs-nand-factory.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-compex_wpq864-squashfs-nand-sysupgrade.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-linksys_ea8500-initramfs-uImage
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-linksys_ea8500-squashfs-factory.bin
0:02:00
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-linksys_ea8500-squashfs-sysupgrade.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-nec_wg2600hp-initramfs-uImage
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-nec_wg2600hp-squashfs-sysupgrade.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-netgear_d7800-initramfs-uImage
0:03:00
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-netgear_d7800-squashfs-factory.img
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-netgear_d7800-squashfs-sysupgrade.bin
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-netgear_r7500-initramfs-uImage
0:04:00
openwrt-19.07-snapshot-r10627-8385d121d0-ipq806x-netgear_r7500-squashfs-factory.img
0:05:00
0:06:00
[sender] io timeout after 120 seconds -- exiting
rsync error: timeout in data send/receive (code 30) at io.c(204) [sender=3.1.2]
0:06:47
program finished with exit code 0

Ps.
Likely the situation will fix itself at the next build after the next commit to the 19.07 main sources, but still annoying that it can fail so silently.

3

Thx for looking into this, but I think it was like this for a few days now. Might be wrong though.

4

Sure.
Last commit to 19.07 was 5 days ago...
https://git.openwrt.org/?p=openwrt/openwrt.git;a=shortlog;h=refs/heads/openwrt-19.07

So, there has been nothing to trigger a new build in buildbot.