Understood, here it is! Thank you very much.
Welcome To HUAWEI Wlan World
U-Boot 628 (Jul 29 2020 - 18:23:32)
DRAM: 512 MB
NAND: 128 MB
NOR: 4 MB
Board Type: 0x105
BOOT: Primary
USB0: USB XHCI 1.00
USB1: USB XHCI 1.00
0 Storage Device(s) found
PCI0 Link Intialized
PCI1 Link Intialized
Press CTRL+T for Full Memory Test in 1 Seconds: 1 0
Net: Ethernet Mac: <redacted>
eth0, eth1
Start Up time(s) : 1
POST test: Begin
Testing GE_0 : Passed.
Testing GE_1 : Passed.
Testing PCIE1 : Passed.
Testing PCIE2 : Passed.
Testing DDR : Passed.
Testing Nor Flash: Passed.
Testing Nand Flash: Passed.
Saving POST results: Done
POST test: End
Image: Current Bootup is B
Press f or F to stop Auto-Boot in 3 seconds: 3 0
Password for uboot cmd line :
ar7240>printenv
baudrate=9600
bootargs=console=ttyHSL1,9600n8
bootcmd=bootipq
bootdelay=3
ethact=eth0
fileaddr=0x42000000
ipaddr=192.168.1.111
machid=1260
serverip=192.168.1.11
stderr=serial
stdin=serial
stdout=serial
ubootfile=u-boot.bin
Environment size: 250/65532 bytes
ar7240>help
? - alias for 'help'
aging - aging cmd
apmode - apmode {fit|fat|cloud}
clear_emt- clear_emt: clear emt file
clear_passwd- clear boot password
defaultuser- use the default user(admin) or the custom user
format_fs- file system format bit will be set
h2f - setting the flag to decide whether to write the data in highmem to flash or not
help - print command description/usage
passwd - modify boot password following prompts
pdinfo - show product information
pdmac - set MAC addresses of product
ping - send ICMP ECHO_REQUEST to network host
printenv- print environment variables
reset - Perform RESET of the CPU
run - run commands in an environment variable
saveenv - save environment variables to persistent storage
setenv - set environment variables
update - update boot or system from tftp
version - show boot and system version
ar7240>