Hello.
My internet is limited to 90~100mb. The computer's network card and switch are working at 1 Giga Full Duplex, but even so, it continues to limit the internet to 100mb.
If I connect the network cable to the modem the internet works at 500mb.
SQM is disabled.
What can it be?
Another problem is that ipv6 only works when I restart the router. If I disconnect and reconnect any device on the network it loses navigation in IPV6
My ISP provides a /64 ipv6 block
What device are you using for your router? If it only has a 100Mbps WAN port, you'll be limited until you replace your hardware. It is also possible that the routing performance is limited to ~100Mbps because of the CPU capabilities. However, without knowing the model of your router, it is impossible to know.
If you should be getting gigabit connections between your router's WAN and your modem, check your cable between your modem and your router. Also check the physical port for any debris.
There could be other things, too... but start with these things.
Hi friend.
I'm using a x86 n5105 as my router. It works at 2.5gb if I connect my PC direct to the router but the internet connection continues limited at 100mb speed
Have you swapped out the cables for known good ones? What is the device reporting for the upstream physical connection to the modem? (100Mbps or 1G)?
The network adapter on my PC and on the switch are reporting 1Gigabit full duplex.
I swapped some cables here and the results are the same.
If I connect the same cable to the ISP modem it works at full speed 500mb
What does openwrt report as the connection on the wan port?
System Log:
kern.info kernel: [ 1353.826664] igc 0000:03:00.0 eth1: igc: eth1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
daemon.notice netifd: Network device 'eth1' link is up
WAN interface
What version of OpenWrt are you running? What packages have you installed compared to a default installation?
I'm running this openwrt-21.02.3-x86-64-generic-squashfs-combined-efi.img On SD card
The packages are
kmod-igc for intel 2.5gb
Luci
Collectd-mod-thermal
Luci-app-statistics
Adguardhome
Docker
Docker-compose
Sqm-scripts
Ddns-scripts
Luci-app-ddns
Are you sure SQM is disabled? What happens if you uninstall it?
I tried unninstall it and had some errors
rrors
Collected errors: * pkg_run_script: Internal error: sqm-scripts has a NULL tmp_unpack_dir. * opkg_remove_pkg: not removing package "sqm-scripts", prerm script failed
The opkg remove command failed with code 255.
I think the package is now removed. I tried reboot the router and do a speedtest and get only 90mb
Wtf hahah
config.buildinfo
CONFIG_TARGET_x86=y
CONFIG_TARGET_x86_64=y
CONFIG_TARGET_x86_64_DEVICE_generic=y
CONFIG_ALL_KMODS=y
CONFIG_ALL_NONSHARED=y
CONFIG_HTOP_LMSENSORS=y
CONFIG_IMAGEOPT=y
CONFIG_LIBSODIUM_MINIMAL=y
CONFIG_LUCI_LANG_en=y
CONFIG_LUCI_LANG_pt_BR=y
CONFIG_OPENSSL_ENGINE=y
CONFIG_OPENSSL_OPTIMIZE_SPEED=y
CONFIG_OPENSSL_WITH_ASM=y
CONFIG_OPENSSL_WITH_CHACHA_POLY1305=y
CONFIG_OPENSSL_WITH_CMS=y
CONFIG_OPENSSL_WITH_DEPRECATED=y
CONFIG_OPENSSL_WITH_ERROR_MESSAGES=y
CONFIG_OPENSSL_WITH_PSK=y
CONFIG_OPENSSL_WITH_SRP=y
CONFIG_OPENSSL_WITH_TLS13=y
CONFIG_PACKAGE_adguardhome=y
CONFIG_PACKAGE_banip=y
CONFIG_PACKAGE_btrfs-progs=y
CONFIG_PACKAGE_ca-certificates=y
CONFIG_PACKAGE_cgi-io=y
CONFIG_PACKAGE_collectd=y
CONFIG_PACKAGE_collectd-mod-cpu=y
CONFIG_PACKAGE_collectd-mod-cpufreq=y
CONFIG_PACKAGE_collectd-mod-dhcpleases=y
CONFIG_PACKAGE_collectd-mod-dns=y
CONFIG_PACKAGE_collectd-mod-interface=y
CONFIG_PACKAGE_collectd-mod-iwinfo=y
CONFIG_PACKAGE_collectd-mod-load=y
CONFIG_PACKAGE_collectd-mod-memory=y
CONFIG_PACKAGE_collectd-mod-network=y
CONFIG_PACKAGE_collectd-mod-ping=y
CONFIG_PACKAGE_collectd-mod-rrdtool=y
CONFIG_PACKAGE_collectd-mod-thermal=y
CONFIG_PACKAGE_collectd-mod-uptime=y
CONFIG_PACKAGE_containerd=y
CONFIG_PACKAGE_ddns-scripts=y
CONFIG_PACKAGE_ddns-scripts-services=y
# CONFIG_PACKAGE_dnsmasq is not set
CONFIG_PACKAGE_dnsmasq-full=y
CONFIG_PACKAGE_dnsmasq_full_auth=y
CONFIG_PACKAGE_dnsmasq_full_conntrack=y
CONFIG_PACKAGE_dnsmasq_full_dhcp=y
CONFIG_PACKAGE_dnsmasq_full_dhcpv6=y
CONFIG_PACKAGE_dnsmasq_full_dnssec=y
CONFIG_PACKAGE_dnsmasq_full_ipset=y
CONFIG_PACKAGE_dnsmasq_full_noid=y
CONFIG_PACKAGE_dnsmasq_full_tftp=y
CONFIG_PACKAGE_docker=y
CONFIG_PACKAGE_docker-compose=y
CONFIG_PACKAGE_dockerd=y
CONFIG_PACKAGE_ethtool=y
CONFIG_PACKAGE_htop=y
CONFIG_PACKAGE_ip-full=y
CONFIG_PACKAGE_ipset=y
CONFIG_PACKAGE_iptables-mod-conntrack-extra=y
CONFIG_PACKAGE_iptables-mod-extra=y
CONFIG_PACKAGE_iptables-mod-ipopt=y
CONFIG_PACKAGE_kmod-br-netfilter=y
CONFIG_PACKAGE_kmod-crypto-acompress=y
CONFIG_PACKAGE_kmod-crypto-aead=y
CONFIG_PACKAGE_kmod-crypto-crc32c=y
CONFIG_PACKAGE_kmod-crypto-hash=y
CONFIG_PACKAGE_kmod-crypto-kpp=y
CONFIG_PACKAGE_kmod-crypto-lib-blake2s=y
CONFIG_PACKAGE_kmod-crypto-lib-chacha20=y
CONFIG_PACKAGE_kmod-crypto-lib-chacha20poly1305=y
CONFIG_PACKAGE_kmod-crypto-lib-curve25519=y
CONFIG_PACKAGE_kmod-crypto-lib-poly1305=y
CONFIG_PACKAGE_kmod-crypto-manager=y
CONFIG_PACKAGE_kmod-crypto-null=y
CONFIG_PACKAGE_kmod-crypto-pcompress=y
CONFIG_PACKAGE_kmod-dax=y
CONFIG_PACKAGE_kmod-dm=y
CONFIG_PACKAGE_kmod-fs-btrfs=y
CONFIG_PACKAGE_kmod-fs-ext4=y
CONFIG_PACKAGE_kmod-ifb=y
CONFIG_PACKAGE_kmod-igc=y
CONFIG_PACKAGE_kmod-ikconfig=y
CONFIG_PACKAGE_kmod-ipt-conntrack-extra=y
CONFIG_PACKAGE_kmod-ipt-extra=y
CONFIG_PACKAGE_kmod-ipt-ipopt=y
CONFIG_PACKAGE_kmod-ipt-ipset=y
CONFIG_PACKAGE_kmod-ipt-raw=y
CONFIG_PACKAGE_kmod-lib-crc16=y
CONFIG_PACKAGE_kmod-lib-crc32c=y
CONFIG_PACKAGE_kmod-lib-lzo=y
CONFIG_PACKAGE_kmod-lib-raid6=y
CONFIG_PACKAGE_kmod-lib-xor=y
CONFIG_PACKAGE_kmod-lib-zlib-deflate=y
CONFIG_PACKAGE_kmod-lib-zlib-inflate=y
CONFIG_PACKAGE_kmod-lib-zstd=y
CONFIG_PACKAGE_kmod-nf-conntrack-netlink=y
CONFIG_PACKAGE_kmod-nf-ipvs=y
CONFIG_PACKAGE_kmod-nfnetlink=y
CONFIG_PACKAGE_kmod-sched-cake=y
CONFIG_PACKAGE_kmod-sched-core=y
CONFIG_PACKAGE_kmod-udptunnel4=y
CONFIG_PACKAGE_kmod-udptunnel6=y
CONFIG_PACKAGE_kmod-veth=y
CONFIG_PACKAGE_kmod-wireguard=y
CONFIG_PACKAGE_libattr=y
CONFIG_PACKAGE_libbpf=y
CONFIG_PACKAGE_libbz2=y
CONFIG_PACKAGE_libcap=y
CONFIG_PACKAGE_libcap-ng=y
CONFIG_PACKAGE_libdb47=y
CONFIG_PACKAGE_libdevmapper=y
CONFIG_PACKAGE_libelf=y
CONFIG_PACKAGE_libffi=y
CONFIG_PACKAGE_libgdbm=y
CONFIG_PACKAGE_libgmp=y
CONFIG_PACKAGE_libipset=y
CONFIG_PACKAGE_libiwinfo=y
CONFIG_PACKAGE_libiwinfo-data=y
CONFIG_PACKAGE_libiwinfo-lua=y
CONFIG_PACKAGE_libltdl=y
CONFIG_PACKAGE_liblua=y
CONFIG_PACKAGE_liblucihttp=y
CONFIG_PACKAGE_liblucihttp-lua=y
CONFIG_PACKAGE_liblzma=y
CONFIG_PACKAGE_liblzo=y
CONFIG_PACKAGE_libmnl=y
CONFIG_PACKAGE_libmount=y
CONFIG_PACKAGE_libncurses=y
CONFIG_PACKAGE_libnetfilter-conntrack=y
CONFIG_PACKAGE_libnettle=y
CONFIG_PACKAGE_libnetwork=y
CONFIG_PACKAGE_libnfnetlink=y
CONFIG_PACKAGE_libopenssl=y
CONFIG_PACKAGE_liboping=y
CONFIG_PACKAGE_libpcap=y
CONFIG_PACKAGE_libpython3=y
CONFIG_PACKAGE_libreadline=y
CONFIG_PACKAGE_librrd1=y
CONFIG_PACKAGE_libseccomp=y
CONFIG_PACKAGE_libsensors=y
CONFIG_PACKAGE_libsodium=y
CONFIG_PACKAGE_libsqlite3=y
CONFIG_PACKAGE_libsysfs=y
CONFIG_PACKAGE_libubus-lua=y
CONFIG_PACKAGE_libuv=y
CONFIG_PACKAGE_libwebsockets-full=y
CONFIG_PACKAGE_libyaml=y
CONFIG_PACKAGE_lm-sensors=y
CONFIG_PACKAGE_lm-sensors-detect=y
CONFIG_PACKAGE_lua=y
CONFIG_PACKAGE_luci=y
CONFIG_PACKAGE_luci-app-acl=y
CONFIG_PACKAGE_luci-app-banip=y
CONFIG_PACKAGE_luci-app-ddns=y
CONFIG_PACKAGE_luci-app-dockerman=y
CONFIG_PACKAGE_luci-app-firewall=y
CONFIG_PACKAGE_luci-app-nlbwmon=y
CONFIG_PACKAGE_luci-app-opkg=y
CONFIG_PACKAGE_luci-app-sqm=y
CONFIG_PACKAGE_luci-app-statistics=y
CONFIG_PACKAGE_luci-app-upnp=y
CONFIG_PACKAGE_luci-app-wireguard=y
CONFIG_PACKAGE_luci-base=y
CONFIG_PACKAGE_luci-compat=y
CONFIG_PACKAGE_luci-i18n-acl-en=y
CONFIG_PACKAGE_luci-i18n-acl-pt-br=y
CONFIG_PACKAGE_luci-i18n-banip-en=y
CONFIG_PACKAGE_luci-i18n-banip-pt-br=y
CONFIG_PACKAGE_luci-i18n-base-en=y
CONFIG_PACKAGE_luci-i18n-base-pt-br=y
CONFIG_PACKAGE_luci-i18n-ddns-en=y
CONFIG_PACKAGE_luci-i18n-ddns-pt-br=y
CONFIG_PACKAGE_luci-i18n-dockerman-en=y
CONFIG_PACKAGE_luci-i18n-dockerman-pt-br=y
CONFIG_PACKAGE_luci-i18n-firewall-en=y
CONFIG_PACKAGE_luci-i18n-firewall-pt-br=y
CONFIG_PACKAGE_luci-i18n-nlbwmon-en=y
CONFIG_PACKAGE_luci-i18n-nlbwmon-pt-br=y
CONFIG_PACKAGE_luci-i18n-opkg-en=y
CONFIG_PACKAGE_luci-i18n-opkg-pt-br=y
CONFIG_PACKAGE_luci-i18n-sqm-en=y
CONFIG_PACKAGE_luci-i18n-sqm-pt-br=y
CONFIG_PACKAGE_luci-i18n-statistics-en=y
CONFIG_PACKAGE_luci-i18n-statistics-pt-br=y
CONFIG_PACKAGE_luci-i18n-upnp-en=y
CONFIG_PACKAGE_luci-i18n-upnp-pt-br=y
CONFIG_PACKAGE_luci-i18n-wireguard-en=y
CONFIG_PACKAGE_luci-i18n-wireguard-pt-br=y
CONFIG_PACKAGE_luci-lib-base=y
CONFIG_PACKAGE_luci-lib-docker=y
CONFIG_PACKAGE_luci-lib-ip=y
CONFIG_PACKAGE_luci-lib-ipkg=y
CONFIG_PACKAGE_luci-lib-jsonc=y
CONFIG_PACKAGE_luci-lib-nixio=y
CONFIG_PACKAGE_luci-mod-admin-full=y
CONFIG_PACKAGE_luci-mod-network=y
CONFIG_PACKAGE_luci-mod-status=y
CONFIG_PACKAGE_luci-mod-system=y
CONFIG_PACKAGE_luci-proto-ipv6=y
CONFIG_PACKAGE_luci-proto-ppp=y
CONFIG_PACKAGE_luci-proto-wireguard=y
CONFIG_PACKAGE_luci-ssl=y
CONFIG_PACKAGE_luci-theme-bootstrap=y
CONFIG_PACKAGE_make=y
CONFIG_PACKAGE_miniupnpd=y
CONFIG_PACKAGE_nlbwmon=y
CONFIG_PACKAGE_openssh-sftp-server=y
CONFIG_PACKAGE_perl=y
CONFIG_PACKAGE_perlbase-base=y
CONFIG_PACKAGE_perlbase-bytes=y
CONFIG_PACKAGE_perlbase-class=y
CONFIG_PACKAGE_perlbase-config=y
CONFIG_PACKAGE_perlbase-cwd=y
CONFIG_PACKAGE_perlbase-errno=y
CONFIG_PACKAGE_perlbase-essential=y
CONFIG_PACKAGE_perlbase-fcntl=y
CONFIG_PACKAGE_perlbase-file=y
CONFIG_PACKAGE_perlbase-filehandle=y
CONFIG_PACKAGE_perlbase-i18n=y
CONFIG_PACKAGE_perlbase-integer=y
CONFIG_PACKAGE_perlbase-io=y
CONFIG_PACKAGE_perlbase-list=y
CONFIG_PACKAGE_perlbase-locale=y
CONFIG_PACKAGE_perlbase-params=y
CONFIG_PACKAGE_perlbase-posix=y
CONFIG_PACKAGE_perlbase-re=y
CONFIG_PACKAGE_perlbase-scalar=y
CONFIG_PACKAGE_perlbase-selectsaver=y
CONFIG_PACKAGE_perlbase-socket=y
CONFIG_PACKAGE_perlbase-symbol=y
CONFIG_PACKAGE_perlbase-tie=y
CONFIG_PACKAGE_perlbase-unicore=y
CONFIG_PACKAGE_perlbase-utf8=y
CONFIG_PACKAGE_perlbase-xsloader=y
CONFIG_PACKAGE_px5g-wolfssl=y
CONFIG_PACKAGE_python3=y
CONFIG_PACKAGE_python3-asyncio=y
CONFIG_PACKAGE_python3-attrs=y
CONFIG_PACKAGE_python3-base=y
CONFIG_PACKAGE_python3-bcrypt=y
CONFIG_PACKAGE_python3-cached-property=y
CONFIG_PACKAGE_python3-certifi=y
CONFIG_PACKAGE_python3-cffi=y
CONFIG_PACKAGE_python3-cgi=y
CONFIG_PACKAGE_python3-cgitb=y
CONFIG_PACKAGE_python3-chardet=y
CONFIG_PACKAGE_python3-codecs=y
CONFIG_PACKAGE_python3-cryptography=y
CONFIG_PACKAGE_python3-ctypes=y
CONFIG_PACKAGE_python3-dbm=y
CONFIG_PACKAGE_python3-decimal=y
CONFIG_PACKAGE_python3-distro=y
CONFIG_PACKAGE_python3-distutils=y
CONFIG_PACKAGE_python3-docker=y
CONFIG_PACKAGE_python3-dockerpty=y
CONFIG_PACKAGE_python3-docopt=y
CONFIG_PACKAGE_python3-dotenv=y
CONFIG_PACKAGE_python3-email=y
CONFIG_PACKAGE_python3-gdbm=y
CONFIG_PACKAGE_python3-idna=y
CONFIG_PACKAGE_python3-jsonschema=y
CONFIG_PACKAGE_python3-light=y
CONFIG_PACKAGE_python3-logging=y
CONFIG_PACKAGE_python3-lzma=y
CONFIG_PACKAGE_python3-multiprocessing=y
CONFIG_PACKAGE_python3-ncurses=y
CONFIG_PACKAGE_python3-openssl=y
CONFIG_PACKAGE_python3-paramiko=y
CONFIG_PACKAGE_python3-pkg-resources=y
CONFIG_PACKAGE_python3-ply=y
CONFIG_PACKAGE_python3-pycparser=y
CONFIG_PACKAGE_python3-pydoc=y
CONFIG_PACKAGE_python3-pynacl=y
CONFIG_PACKAGE_python3-pyrsistent=y
CONFIG_PACKAGE_python3-readline=y
CONFIG_PACKAGE_python3-requests=y
CONFIG_PACKAGE_python3-setuptools=y
CONFIG_PACKAGE_python3-six=y
CONFIG_PACKAGE_python3-sqlite3=y
CONFIG_PACKAGE_python3-texttable=y
CONFIG_PACKAGE_python3-unittest=y
CONFIG_PACKAGE_python3-urllib=y
CONFIG_PACKAGE_python3-urllib3=y
CONFIG_PACKAGE_python3-websocket-client=y
CONFIG_PACKAGE_python3-xml=y
CONFIG_PACKAGE_python3-yaml=y
CONFIG_PACKAGE_rpcd=y
CONFIG_PACKAGE_rpcd-mod-file=y
CONFIG_PACKAGE_rpcd-mod-iwinfo=y
CONFIG_PACKAGE_rpcd-mod-luci=y
CONFIG_PACKAGE_rpcd-mod-rrdns=y
CONFIG_PACKAGE_rrdtool1=y
CONFIG_PACKAGE_runc=y
CONFIG_PACKAGE_sqm-scripts=y
CONFIG_PACKAGE_sysfsutils=y
CONFIG_PACKAGE_tc-full=y
CONFIG_PACKAGE_tc-mod-iptables=y
CONFIG_PACKAGE_terminfo=y
CONFIG_PACKAGE_tini=y
CONFIG_PACKAGE_ttyd=y
CONFIG_PACKAGE_uhttpd=y
CONFIG_PACKAGE_uhttpd-mod-ubus=y
CONFIG_PACKAGE_wireguard-tools=y
CONFIG_PACKAGE_zlib=y
CONFIG_PERL_NOCOMMENT=y
CONFIG_PERL_THREADS=y
CONFIG_SQLITE3_DYNAMIC_EXTENSIONS=y
CONFIG_SQLITE3_FTS3=y
CONFIG_SQLITE3_FTS4=y
CONFIG_SQLITE3_FTS5=y
CONFIG_SQLITE3_JSON1=y
CONFIG_SQLITE3_RTREE=y
CONFIG_TARGET_ROOTFS_PARTSIZE=5120
CONFIG_VERSIONOPT=y
CONFIG_VERSION_BUG_URL=""
CONFIG_VERSION_CODE=""
CONFIG_VERSION_DIST="OpenWrt"
CONFIG_VERSION_FILENAMES=y
CONFIG_VERSION_HOME_URL=""
CONFIG_VERSION_HWREV=""
CONFIG_VERSION_MANUFACTURER=""
CONFIG_VERSION_MANUFACTURER_URL=""
CONFIG_VERSION_NUMBER=""
CONFIG_VERSION_PRODUCT=""
CONFIG_VERSION_REPO="https://downloads.openwrt.org/releases/21.02.3"
CONFIG_VERSION_SUPPORT_URL=""
feeds.buildinfo
src-git packages https://git.openwrt.org/feed/packages.git^8ad4a7031
src-git luci https://git.openwrt.org/project/luci.git^c6d28851d7
src-git routing https://git.openwrt.org/feed/routing.git^b08cc3e
src-git telephony https://git.openwrt.org/feed/telephony.git^89cc8fc
version.buildinfo
r16554-1d4dea6d4f
manifest
adguardhome - 0.107.6-1
banip - 0.7.10-3
base-files - 1442-r16554-1d4dea6d4f
bnx2-firmware - 20211216-1
btrfs-progs - 5.11-1
busybox - 1.33.2-2
ca-bundle - 20210119-1
ca-certificates - 20210119-1
cgi-io - 2021-09-08-98cef9dd-20
collectd - 5.12.0-10
collectd-mod-cpu - 5.12.0-10
collectd-mod-cpufreq - 5.12.0-10
collectd-mod-dhcpleases - 5.12.0-10
collectd-mod-dns - 5.12.0-10
collectd-mod-interface - 5.12.0-10
collectd-mod-iwinfo - 5.12.0-10
collectd-mod-load - 5.12.0-10
collectd-mod-memory - 5.12.0-10
collectd-mod-network - 5.12.0-10
collectd-mod-ping - 5.12.0-10
collectd-mod-rrdtool - 5.12.0-10
collectd-mod-thermal - 5.12.0-10
collectd-mod-uptime - 5.12.0-10
containerd - 1.6.6-1
ddns-scripts - 2.8.2-12
ddns-scripts-services - 2.8.2-12
dnsmasq-full - 2.85-8
docker - 20.10.17-1
docker-compose - 1.28.2-1
dockerd - 20.10.17-1
dropbear - 2020.81-2
e2fsprogs - 1.45.6-2
ethtool - 5.10-1
firewall - 2021-03-23-61db17ed-1
fstools - 2021-01-04-c53b1882-1
fwtool - 2019-11-12-8f7fe925-1
getrandom - 2020-10-25-9ef88681-2
grub2 - 2.04-3
grub2-efi - 2.04-3
htop - 3.2.1-1
ip-full - 5.11.0-3
ip6tables - 1.8.7-1
ipset - 7.6-1
iptables - 1.8.7-1
iptables-mod-conntrack-extra - 1.8.7-1
iptables-mod-extra - 1.8.7-1
iptables-mod-ipopt - 1.8.7-1
jshn - 2021-05-16-b14c4688-2
jsonfilter - 2018-02-04-c7e938d6-1
kernel - 5.4.188-1-ab6e066197300f44b81557459a20148f
kmod-bnx2 - 5.4.188-1
kmod-br-netfilter - 5.4.188-1
kmod-button-hotplug - 5.4.188-3
kmod-crypto-acompress - 5.4.188-1
kmod-crypto-aead - 5.4.188-1
kmod-crypto-crc32c - 5.4.188-1
kmod-crypto-hash - 5.4.188-1
kmod-crypto-kpp - 5.4.188-1
kmod-crypto-lib-blake2s - 5.4.188-1
kmod-crypto-lib-chacha20 - 5.4.188-1
kmod-crypto-lib-chacha20poly1305 - 5.4.188-1
kmod-crypto-lib-curve25519 - 5.4.188-1
kmod-crypto-lib-poly1305 - 5.4.188-1
kmod-crypto-manager - 5.4.188-1
kmod-crypto-null - 5.4.188-1
kmod-crypto-pcompress - 5.4.188-1
kmod-dax - 5.4.188-1
kmod-dm - 5.4.188-1
kmod-e1000 - 5.4.188-1
kmod-e1000e - 5.4.188-1
kmod-forcedeth - 5.4.188-1
kmod-fs-btrfs - 5.4.188-1
kmod-fs-ext4 - 5.4.188-1
kmod-fs-vfat - 5.4.188-1
kmod-hwmon-core - 5.4.188-1
kmod-i2c-algo-bit - 5.4.188-1
kmod-i2c-core - 5.4.188-1
kmod-ifb - 5.4.188-1
kmod-igb - 5.4.188-1
kmod-igc - 5.4.188-1
kmod-ikconfig - 5.4.188-1
kmod-input-core - 5.4.188-1
kmod-ip6tables - 5.4.188-1
kmod-ipt-conntrack - 5.4.188-1
kmod-ipt-conntrack-extra - 5.4.188-1
kmod-ipt-core - 5.4.188-1
kmod-ipt-extra - 5.4.188-1
kmod-ipt-ipopt - 5.4.188-1
kmod-ipt-ipset - 5.4.188-1
kmod-ipt-nat - 5.4.188-1
kmod-ipt-offload - 5.4.188-1
kmod-ipt-raw - 5.4.188-1
kmod-ixgbe - 5.4.188-1
kmod-lib-crc-ccitt - 5.4.188-1
kmod-lib-crc16 - 5.4.188-1
kmod-lib-crc32c - 5.4.188-1
kmod-lib-lzo - 5.4.188-1
kmod-lib-raid6 - 5.4.188-1
kmod-lib-xor - 5.4.188-1
kmod-lib-zlib-deflate - 5.4.188-1
kmod-lib-zlib-inflate - 5.4.188-1
kmod-lib-zstd - 5.4.188-1
kmod-libphy - 5.4.188-1
kmod-mdio - 5.4.188-1
kmod-mii - 5.4.188-1
kmod-nf-conntrack - 5.4.188-1
kmod-nf-conntrack-netlink - 5.4.188-1
kmod-nf-conntrack6 - 5.4.188-1
kmod-nf-flow - 5.4.188-1
kmod-nf-ipt - 5.4.188-1
kmod-nf-ipt6 - 5.4.188-1
kmod-nf-ipvs - 5.4.188-1
kmod-nf-nat - 5.4.188-1
kmod-nf-reject - 5.4.188-1
kmod-nf-reject6 - 5.4.188-1
kmod-nfnetlink - 5.4.188-1
kmod-nls-base - 5.4.188-1
kmod-nls-cp437 - 5.4.188-1
kmod-nls-iso8859-1 - 5.4.188-1
kmod-nls-utf8 - 5.4.188-1
kmod-phy-realtek - 5.4.188-1
kmod-ppp - 5.4.188-1
kmod-pppoe - 5.4.188-1
kmod-pppox - 5.4.188-1
kmod-pps - 5.4.188-1
kmod-ptp - 5.4.188-1
kmod-r8169 - 5.4.188-1
kmod-sched-cake - 5.4.188-1
kmod-sched-core - 5.4.188-1
kmod-slhc - 5.4.188-1
kmod-udptunnel4 - 5.4.188-1
kmod-udptunnel6 - 5.4.188-1
kmod-veth - 5.4.188-1
kmod-wireguard - 5.4.188-1
libattr - 2.4.48-2
libblkid1 - 2.36.1-2
libblobmsg-json20210516 - 2021-05-16-b14c4688-2
libbpf0 - 5.10.10-2
libbz2-1.0 - 1.0.8-1
libc - 1.1.24-3
libcap - 2.43-1
libcap-ng - 0.8.1-1
libcomerr0 - 1.45.6-2
libdb47 - 4.7.25.4.NC-6
libdevmapper - 2.03.14-1
libelf1 - 0.180-1
libext2fs2 - 1.45.6-2
libf2fs6 - 1.14.0-1
libffi - 3.3-2
libgcc1 - 8.4.0-3
libgdbm - 1.18.1-2
libgmp10 - 6.2.1-1
libip4tc2 - 1.8.7-1
libip6tc2 - 1.8.7-1
libipset13 - 7.6-1
libiwinfo-data - 2021-04-30-c45f0b58-2.1
libiwinfo-lua - 2021-04-30-c45f0b58-2.1
libiwinfo20210430 - 2021-04-30-c45f0b58-2.1
libjson-c5 - 0.15-2
libjson-script20210516 - 2021-05-16-b14c4688-2
libltdl7 - 2.4.6-2
liblua5.1.5 - 5.1.5-9
liblucihttp-lua - 2021-06-11-3dc89af4-1
liblucihttp0 - 2021-06-11-3dc89af4-1
liblzma - 5.2.5-3
liblzo2 - 2.10-4
libmnl0 - 1.0.4-2
libmount1 - 2.36.1-2
libncurses6 - 6.2-3
libnetfilter-conntrack3 - 1.0.8-1
libnettle8 - 3.6-1
libnetwork - 2022-06-02-f6ccccb1-1
libnfnetlink0 - 1.0.1-4
libnl-tiny1 - 2020-08-05-c291088f-2
libopenssl1.1 - 1.1.1n-1
liboping - 1.10.0-2
libpcap1 - 1.9.1-3.1
libpthread - 1.1.24-3
libpython3-3.9 - 3.9.13-1
libreadline8 - 8.1-1
librrd1 - 1.0.50-3
librt - 1.1.24-3
libseccomp - 2.5.1-1
libsensors5 - 3.6.0-1
libsmartcols1 - 2.36.1-2
libsodium - 1.0.18-4
libsqlite3-0 - 3330000-1
libss2 - 1.45.6-2
libsysfs2 - 2.1.0-3
libubox20210516 - 2021-05-16-b14c4688-2
libubus-lua - 2021-06-30-4fc532c8-2
libubus20210630 - 2021-06-30-4fc532c8-2
libuci20130104 - 2021-04-14-4b3db117-5
libuclient20201210 - 2021-05-14-6a6011df-1
libustream-wolfssl20201210 - 2022-01-16-868fd881-1
libuuid1 - 2.36.1-2
libuv1 - 1.40.0-3
libwebsockets-full - 3.1.0-2
libwolfssl5.2.0.99a5b54a - 5.2.0-stable-1
libxtables12 - 1.8.7-1
libyaml - 0.2.5-1
lm-sensors - 3.6.0-1
lm-sensors-detect - 3.6.0-1
logd - 2020-10-25-9ef88681-2
lua - 5.1.5-9
luci - git-20.074.84698-ead5e81
luci-app-acl - git-21.194.67638-1d6053e
luci-app-banip - git-21.165.16952-467b853
luci-app-ddns - git-22.123.50005-9139ad4
luci-app-dockerman - v0.5.13
luci-app-firewall - git-22.089.67741-3856d50
luci-app-nlbwmon - git-21.188.55222-19331bd
luci-app-opkg - git-22.154.41894-1cf976c
luci-app-sqm - git-21.188.55209-f161b40
luci-app-statistics - git-22.115.68435-0473e99
luci-app-upnp - git-20.332.74200-03c77da
luci-app-wireguard - git-20.244.42172-21563a2
luci-base - git-22.167.28411-ee8170b
luci-compat - git-22.046.85744-f08a0f6
luci-i18n-acl-en - git-22.135.62129-7387ec8
luci-i18n-acl-pt-br - git-22.135.62129-7387ec8
luci-i18n-banip-en - git-22.209.62380-c6d2885
luci-i18n-banip-pt-br - git-22.209.62380-c6d2885
luci-i18n-base-en - git-22.209.62380-c6d2885
luci-i18n-base-pt-br - git-22.209.62380-c6d2885
luci-i18n-ddns-en - git-22.209.62380-c6d2885
luci-i18n-ddns-pt-br - git-22.209.62380-c6d2885
luci-i18n-dockerman-en - git-22.209.62380-c6d2885
luci-i18n-dockerman-pt-br - git-22.209.62380-c6d2885
luci-i18n-firewall-en - git-22.184.38437-cbf33ce
luci-i18n-firewall-pt-br - git-22.184.38437-cbf33ce
luci-i18n-nlbwmon-en - git-22.184.38437-cbf33ce
luci-i18n-nlbwmon-pt-br - git-22.184.38437-cbf33ce
luci-i18n-opkg-en - git-22.184.38437-cbf33ce
luci-i18n-opkg-pt-br - git-22.184.38437-cbf33ce
luci-i18n-sqm-en - git-22.209.62380-c6d2885
luci-i18n-sqm-pt-br - git-22.209.62380-c6d2885
luci-i18n-statistics-en - git-22.209.62380-c6d2885
luci-i18n-statistics-pt-br - git-22.209.62380-c6d2885
luci-i18n-upnp-en - git-22.163.60897-a037a14
luci-i18n-upnp-pt-br - git-22.163.60897-a037a14
luci-i18n-wireguard-en - git-22.163.60897-a037a14
luci-i18n-wireguard-pt-br - git-22.163.60897-a037a14
luci-lib-base - git-20.232.39649-1f6dc29
luci-lib-docker - git-21.167.46325-83f6606
luci-lib-ip - git-20.250.76529-62505bd
luci-lib-ipkg - git-18.318.71164-4bbe325
luci-lib-jsonc - git-22.097.61937-bc85ba5
luci-lib-nixio - git-20.234.06894-c4a4e43
luci-mod-admin-full - git-19.253.48496-3f93650
luci-mod-network - git-22.046.85061-dd54dce
luci-mod-status - git-22.046.85784-0ac2542
luci-mod-system - git-22.130.00635-21f99bd
luci-proto-ipv6 - git-21.148.49484-14511e5
luci-proto-ppp - git-21.163.64918-6c6559a
luci-proto-wireguard - git-21.243.21928-71fe35c
luci-ssl - git-20.244.36115-e10f954
luci-theme-bootstrap - git-22.084.39047-f1d687e
make - 4.3-1
miniupnpd - 2.2.1-3
mkf2fs - 1.14.0-1
mtd - 26
netifd - 2021-10-30-8f82742c-1
nlbwmon - 2020-04-11.1-34a18876-3
odhcp6c - 2021-01-09-53f07e90-16
odhcpd-ipv6only - 2021-07-18-bc9d317f-3
openssh-sftp-server - 8.4p1-4
openwrt-keyring - 2021-02-20-49283916-2
opkg - 2021-06-13-1bf042dd-1
partx-utils - 2.36.1-2
perl - 5.28.1-6
perlbase-base - 5.28.1-6
perlbase-bytes - 5.28.1-6
perlbase-class - 5.28.1-6
perlbase-config - 5.28.1-6
perlbase-cwd - 5.28.1-6
perlbase-errno - 5.28.1-6
perlbase-essential - 5.28.1-6
perlbase-fcntl - 5.28.1-6
perlbase-file - 5.28.1-6
perlbase-filehandle - 5.28.1-6
perlbase-i18n - 5.28.1-6
perlbase-integer - 5.28.1-6
perlbase-io - 5.28.1-6
perlbase-list - 5.28.1-6
perlbase-locale - 5.28.1-6
perlbase-params - 5.28.1-6
perlbase-posix - 5.28.1-6
perlbase-re - 5.28.1-6
perlbase-scalar - 5.28.1-6
perlbase-selectsaver - 5.28.1-6
perlbase-socket - 5.28.1-6
perlbase-symbol - 5.28.1-6
perlbase-tie - 5.28.1-6
perlbase-unicore - 5.28.1-6
perlbase-utf8 - 5.28.1-6
perlbase-xsloader - 5.28.1-6
ppp - 2.4.8.git-2020-10-03-3
ppp-mod-pppoe - 2.4.8.git-2020-10-03-3
procd - 2021-03-08-2cfc26f8-1
px5g-wolfssl - 3
python3 - 3.9.13-1
python3-asyncio - 3.9.13-1
python3-attrs - 21.2.0-1
python3-base - 3.9.13-1
python3-bcrypt - 3.1.7-4
python3-cached-property - 1.5.2-1
python3-certifi - 2021.5.30-1
python3-cffi - 1.14.6-1
python3-cgi - 3.9.13-1
python3-cgitb - 3.9.13-1
python3-chardet - 4.0.0-1
python3-codecs - 3.9.13-1
python3-cryptography - 3.4.8-2
python3-ctypes - 3.9.13-1
python3-dbm - 3.9.13-1
python3-decimal - 3.9.13-1
python3-distro - 1.5.0-3
python3-distutils - 3.9.13-1
python3-docker - 4.4.1-1
python3-dockerpty - 0.4.1-3
python3-docopt - 0.6.2-2
python3-dotenv - 0.15.0-1
python3-email - 3.9.13-1
python3-gdbm - 3.9.13-1
python3-idna - 3.2-1
python3-jsonschema - 3.2.0-5
python3-light - 3.9.13-1
python3-logging - 3.9.13-1
python3-lzma - 3.9.13-1
python3-multiprocessing - 3.9.13-1
python3-ncurses - 3.9.13-1
python3-openssl - 3.9.13-1
python3-paramiko - 2.7.2-1
python3-pkg-resources - 58.1.0-1
python3-ply - 3.11-2
python3-pycparser - 2.20-5
python3-pydoc - 3.9.13-1
python3-pynacl - 1.4.0-6
python3-pyrsistent - 0.16.0-1
python3-readline - 3.9.13-1
python3-requests - 2.25.1-2
python3-setuptools - 58.1.0-1
python3-six - 1.16.0-1
python3-sqlite3 - 3.9.13-1
python3-texttable - 1.6.3-1
python3-unittest - 3.9.13-1
python3-urllib - 3.9.13-1
python3-urllib3 - 1.25.11-1
python3-websocket-client - 0.57.0-2
python3-xml - 3.9.13-1
python3-yaml - 5.3.1-2
r8169-firmware - 20211216-1
rpcd - 2022-02-19-8d26a1ba-1
rpcd-mod-file - 2022-02-19-8d26a1ba-1
rpcd-mod-iwinfo - 2022-02-19-8d26a1ba-1
rpcd-mod-luci - 20210614
rpcd-mod-rrdns - 20170710
rrdtool1 - 1.0.50-3
runc - 1.1.2-1
sqm-scripts - 1.5.1-1
sysfsutils - 2.1.0-3
tc-full - 5.11.0-3
tc-mod-iptables - 5.11.0-3
terminfo - 6.2-3
tini - 0.19.0-2
ttyd - 1.6.3-3
ubox - 2020-10-25-9ef88681-2
ubus - 2021-06-30-4fc532c8-2
ubusd - 2021-06-30-4fc532c8-2
uci - 2021-04-14-4b3db117-5
uclient-fetch - 2021-05-14-6a6011df-1
uhttpd - 2021-03-21-15346de8-2
uhttpd-mod-ubus - 2021-03-21-15346de8-2
urandom-seed - 3
urngd - 2020-01-21-c7f7b6b6-1
usign - 2020-05-23-f1f65026-1
wireguard-tools - 1.0.20210223-2
zlib - 1.2.11-4
I also have the NanoPi R4s with friendlywrt and the connection is working at 500mb with the same cables.
The connection speed is working now at full speed on the n5105 but I didn't change nothing and it is working wtf.
I'm going to reinstall the system anyway
I did reinstall de openwrt on the SD card and the speed is normal but the problem with ipv6 still does exist. If I restart the router all clients will have ipv6 connection but if I disconnect and reconnect a client it can't navigate on ipv6 anymore.
Maybe the problem is the ::/64 ?