I am trying to build a travel router using a RPi4, OpenWrt, and a USB wifi adapter. (using the tutorial on Network Chuck)
I can connect the Pi to my home network over the built in radio, and I can connect to the Pi over the USB wifi.
When connected as stated above - If I use the Windows terminal and log in to the Pi I have an internet connection. But, there is no internet connection when I simply log in to the Pi.
Any ideas what may be going on here?
tried asking chuck?
Yes, sent Chuck an email - no response
probably good to start with your wireless config, relevant parts of logread (hostapd)... etc. etc.
logread -e hostapd
iw reg get
and go from there...
this is also a little unclear... diagrams help... what the above says to me is;
- onboard wifi is your WAN?
- usb wifi is your LAN?
- wired is just a management interface (also LAN or LAN2 etc. but seldom used)?