Hello, I am wandering if it is possible to be able to add OpenWrt OS to the TaoTronics Mesh Router.
The model of this mesh router is TT-nd001.
It is a Tri-Band Wifi 5 (AC) Router.
2 Likes
Mediatek chipset according to https://fccid.io/2AVUHTT-ND001/
1 Like
+1 would be very interested in this!
obtain serial access, and bootm an initramfs DLed from https://downloads.openwrt.org/releases/22.03.5/targets/ramips/mt7621/, belonging to one of the devices on this list.
I have this router too, Did you make it works with Openwrt?
Taotronics seems to be not supporting this anymore, so also interested in being able to put Openwrt on it. Please let me know if any progress is made here.
Following. I've got 6 devices on my hand & can't use them for anything but paper weight since the app is no longer supported.
you'll be following for a very long time.
you own these, you'll be the person adding the openwrt support.
1 Like
help! i need openwrt on this device! can I install it on it from D-Link DIR-878 A1?
1 Like
if you like high tech paper weights, go for it.
best case scenario, you'll "only" soft brick it.
1 Like
App actually doesn't work for me. I always get connection "Network exception error". No way to login & setup
Did you end up trying? How'd it go?
Just got this email:
"We deeply regret to inform you that our servers have encountered a technical bug that, unfortunately, cannot be rectified. We understand the frustration and inconvenience this may have caused, and we sincerely apologize for the disruption to your service.
In light of this situation, we would like to offer compensation of 40% of the total amount of your order as a gesture of goodwill. We hope that this refund can help alleviate any inconvenience you may have experienced.
We understand that this may not fully make up for the disruption, but we genuinely hope that you can accept this offer as a sign of our commitment to your satisfaction. Please let us know if you are in agreement with this resolution, and we will promptly process the refund accordingly.
Once again, we apologize for any inconvenience you may have faced and appreciate your understanding during this time. If you have any questions or require further assistance, please do not hesitate to reach out to us."
I used TTL cable and get serial access. but it require login username and password.
Anyone know how to reflash SW without login info?
1 Like
u-boot.
what are you going to flash it with ?
it's Mediatek MT7621AT SoC, will try to find the same CPU firmware to flash it first.
The questions is I can not login uboot.
Any suggestion?
1 Like
Hope you got a spare router somewhere.
Not really, they might have disabled the input, on purpose.
Watch the console while you boot with the physical button(s) pressed, if there are any.
Wound up ordering some different routers, but have 3 of these lumps of anyone needs me to guinea pig anything!
I've bought one dirt cheap, i can Play with this but in mid december.
2 Likes
Something I already figured out.
1.the Serial port speed is 57600
2. I tried Power on router, with reset button pressed, but noting happen.