Installing LEDE/u-boot via brnboot web interface (without rs232)

[slh]

@Limer

Where can in get current versions? All I could find were the oWRT links and similar ones to dropbox etc.

Depending on what you need/ want:

• https://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/u-boot-vgv7510kw22_brn/

• https://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/u-boot-vgv7510kw22_nor/

• https://downloads.lede-project.org/snapshots/targets/lantiq/xrx200/u-boot-vgv7510kw22_ram/

@Limer

How did you install lede anyway?

In short, loading the brn u-boot variant via serial console/ brnboot (open the device and access the serial header - or get inventive with short pipes to go through the vents of the closed device) and then flashing the NOR u-boot via tftpboot (run write-uboot-nor); loading/ flashing LEDE from there via tftpboot after rebooting into the NOR u-boot.

@Limer

Here it is: pepe2k integrated a web server in an older u-boot version but it does not appear to be in the mainstream u-boot(?).

That's not available.