I'm trying to install openwrt on tp-link re350 wifi repeater.
Firstly i've tried downloading the factory image and then uploading it via the web ui in the firmware update page of the repeater but an "invalid checksum" error is shown and the process stops.
I've also tried to use TFTP method, put a static ip on my laptop and connected it to the repeater via Ethernet, holded the reset button and plugged in but nothing happens and the log is empty.
I was just wondering if there is anything else I could try.
Well, the interface keeps changing upon plugging in the repeater and i need to reselect the correct one while still holding the reset button. So maybe this is where i fail?
In any case as I couldn't find any information online, can you kindly confirm if that's the correct/working method to install openwrt on re350?