"ifname" does not let clients connect

I have two WiFi networks on the same radio. One private and the other for guests. The first one is on lan and the second one is guest.
Now configure an interface for this WiFi network and its Firewall rules without having put anything in option ifname 'name' and you see that it already has an IP.

1

2

And when doing the same in another occasion, but adding a name in option ifname 'name', it appears as having no IP and no client can connect.

3

4

And when doing the same in another occasion, but adding a name in option ifname 'name', it appears as having no IP and no client can connect.

try removing the dot from your ifname

The other WiFi network that is on the same radio, also has an interface name and a period. The first one is called 2.4G_ap and the second 2.4G_ap_guest, to differentiate the clients in the radios of the router.

I eliminated the points in the two networks and it already works. Well ... with eliminating the point in the second network and started working.

1 Like

This topic was automatically closed 10 days after the last reply. New replies are no longer allowed.