I install openwrt on asus but no internet

Installing and Using OpenWrt
1

I install openwrt on my asus rt-ac51u but there is no internet i conect a cable like usual from my wireless internet antena on my modem wan port but ther is no internet.is there any special adjustment?

2

what's a "wireless internet antena" ?

perhaps, depends on your uplink.

1 Like
3

I try py isp with other router every think is ok .if there should be a adjustment to enable o disblae or change something .i chang some seting in interface and reset the the router but still no internet.

4

Ok, you changed "something" and it still didn't work, and you'd like us to do what exactly what with that wast amount of information ?

2 Likes
5

Please, explain: do you get an IP address on the WAN interface? can you ping an external site by address? and by name?

Which know and of cable? Where is it connected, exactly?

What's that? Brand / model?

Brand / model? What role does it play here?

1 Like
6

No i didnot change anything at first .asus ac51u.

7

I don,t know who to get ip.i put cable on wan port ant the ne light of router start to blink but i didnot get net.1 way is conected to wan and one way is conected to my internet wirless antenta like before.router is asus ac51u.looke exactly i install openwrt on my asus ac51 u and then i conect the cable from my internet provider antena to my wan port of router like before that i had internet but ther was no internet after installing openwrt.i think i should change something

8

In order to get appropriate help, you will need to provide more detailed answers. Otherwise, we won't have enough information to give you any guidance.

First, and most importantly...

  • what is your ISP connection method? (the 3 typical options are: DHCP, PPPoE, or Static IP). And is there a VLAN ID required?
    • if you don't know, you will need to ask your ISP for that information. It is mandatory and critical.
    • If you use PPPoE or Static IP, you also need to know the details of that connection (PPPoE requires login credentials; Static IP requires the IP address, subnet mask/size, gateway, and DNS)

Please provide the above information, and if you don't have it, ask your ISP.

1 Like
9

Hi,it is dhcp it was like when i put the cable in any router without any adjusment internet work

10
  • Are you able to access the web GUI at https://192.168.1.1
  • It would be on the overview page upon long, under "IPv4 Upstream"
  • Can you verify OpenWrt successfully installed on your device?
1 Like
11

This sounds like a wireless ISP with an antenna provided by the company pointed at a nearby tower. Make sure the wan IP issued by the "antenna" is not also in the 192.168.1.X range. If it is, you will need to change your LAN IP to something else such as 192.168.2.1.

1 Like
12

Thanks you all it was dhcp and it start working from resetin back of the modem not by software

1 Like