Hello, a newbie here.
I recently broke my OpenWRT configurations and decided to reconfigure It after a couple of weeks. I have managed to do the most parts such as configuring Wireless, DHCP, and PPPoe. Even If I feel so close, I couldn't figure out the last part.
I can succesfully connect to Wi-Fi, open the panel and even curl openwrt.org from the router but I've no signs of connection in my local net.
I've tried disablibg zone settings in firewall but It was a vain.
I'm ready to give out further info.
What's the WAN and LAN IPs of your router.
I referred to LuCi as panel.
My WAN's IPv4 address is 10.47.*. and 192.168.1.1 on LAN
What DNSes and default GW are your clients getting?
They get LAN IP adress for both DNS and GW...
And they both point to 192.168.1.1?
They don't. I've WAN interface's IPv4 address as gateway and configured It to use 2 french OpenNIC servers before
if you ping those IPs you've set, from your clients, do they work?
Please copy the output of the following commands and post it here using the "Preformatted text
</> " button:
Remember to redact passwords, MAC addresses and any public IP addresses you may have: