I have Huawei M150-2 which is also E3372h
why i cant assign this virtual interface to any firewall zone?
maybe i dont have to ? Because this interface has been created by 3g NCM interface automaticly
if i click EDIT button there is nothing but DISSMIS and SAVE buttons
ifconfig
wwan0 Link encap:Ethernet HWaddr 00:1E:10:1F:00:00
inet addr:100.67.78.113 Bcast:100.67.78.115 Mask:255.255.255.252
inet6 addr: fe80::21e:10ff:fe1f:0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:4768 errors:0 dropped:0 overruns:0 frame:0
TX packets:8030 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1353536 (1.2 MiB) TX bytes:10240513 (9.7 MiB)
and dmesg
[ 5.174617] usbcore: registered new interface driver usbfs
[ 5.185705] usbcore: registered new interface driver hub
[ 5.196475] usbcore: registered new device driver usb
[ 5.249456] phy phy-usbphy.0: remote usb device wakeup disabled
[ 5.261281] phy phy-usbphy.0: UTMI 16bit 30MHz
[ 5.627474] usb 1-1: new high-speed USB device number 2 using ehci-platform
[ 16.488750] usbcore: registered new interface driver cdc_wdm
[ 16.605421] usbcore: registered new interface driver ipheth
[ 16.902573] usbcore: registered new interface driver usbserial
[ 16.914423] usbcore: registered new interface driver usbserial_generic
[ 16.927604] usbserial: USB Serial support registered for generic
[ 17.495802] usbcore: registered new interface driver cdc_ether
[ 17.545849] usbcore: registered new interface driver cdc_ncm
[ 17.810057] huawei_cdc_ncm 1-1:1.2 wwan0: register 'huawei_cdc_ncm' at usb-101c0000.ehci-1, Huawei CDC NCM device, 00:1e:10:1f:00:00
[ 17.834184] usbcore: registered new interface driver huawei_cdc_ncm
[ 18.074851] usbcore: registered new interface driver qmi_wwan
[ 18.106238] usbcore: registered new interface driver rndis_host
[ 18.186088] usbcore: registered new interface driver option
[ 18.197410] usbserial: USB Serial support registered for GSM modem (1-port)
[ 18.224479] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 18.250974] usb 1-1: GSM modem (1-port) converter now attached to ttyUSB1