How to upload OpenWrt to my new Comfast CF-EW72 V2 AP?

[GDC-CDMX]

Hi everybody! I'm kind of new using the COMFAST brand, so in order to test it, just bougth the AP model CF-EW72 v2. In the list of the supported hardware by OpenWrt the model CF-EW72 appears but only in v1. I've been looking for information and found other discussions in this forum that tried to use OpenWrt with this same device and model, but never mentioned if it worked out or not. Please tell me any solution that you could know.

By the way, when I'm trying to entered via SSH, an user ID and a password is requested, and I don't have it. Which could be?

Also tried to connect throught serial ports without results (dont get an answer from PuTTY).

I'm attaching the link to the other discussions about this topic:

Support for Comfast CF-EW72 V2 MT7621

Hello everyone. I got now also the new Version of the CF-EW72 and want to flash openwrt to it. The Post Support for Comfast CF-EW72/MT7621 - For Developers - OpenWrt Forum is closed. How can it be possible to get an openwrt firmware for this device. The Comfast firmware is based on openwrt 17 CF-EW72V2-V2.6.0.1 - AP Firmware - COMFAST At the moment I have ssh acess to the device with cf firmware. Many thanks for helping.

Support for Comfast CF-EW72/MT7621

Hello everyone. So I recently purchased a few Comfast CF-EW72 access points followed the wiki guide and bricked the firmware after a while of trying to figure out what was going on, someone pointed out they were running off the Mediatek SOC not the usual Qualcomm. I'm not sure where to go from here. I've messaged Comfast to try get some info as all their specifications they publish show the Qualcomm chip so either they recently changed or I've managed to get a bunch of counterfeit access point…

[frollic]

@GDC-CDMX

never mentioned if it worked out or not

Then you really need to read those threads more carefully.

[PhoenixG36]

@GDC-CDMX

CF-EW72 v2

@GDC-CDMX
all Infos you need [OpenWrt Wiki] COMFAST CF-EW72 V2