What am I looking at?
How i can delete openwrt its stuck and i cant get admin page anymore !!!!! I tried hard reset but can't get into there anymore. Any instructions helps?!!!
there is a written text explaining how to recover?
„ See installation instructions for the wg2626 as this is basically the same device. It involves booting the router into recovery mode and uploading the image through the Chinese recovery page.“
No need to post the same twice.
Again, does your router currently have internet access?
And which image did you flash (file name)?
I flash image u send me by link openwrt 22.03.2ramips-mt7621 zbtlink-zbt-wg3526-16m
Yes im connected to internet through hotspot connection
All good friend i rebot and found the packages
Hi again friend i manged to connect to internet now how i can get a package or build a code for get modem information such signal strangth and other LTE information. ?
…could you please scroll upwards for a second and take note, how often you did not succeed on simple tasks today?
I would say, use it as is for now. You almost got a heart attack several times today failing on a lot of easy things and seem to not lookup a lot of basic things in the wiki and forum on your own.
Get familiar with it for now, try things and learn how to reset settings, to start over. Browse the forum, read wiki to learn basic things. Maybe google for people that have blogs about topics that you like.
But your „show me how to“-forum-coins are depleted for today. For next time, please do some do-it-yourself-homework first and concentrate your questions on type „i am looking for xy, already tried this and that, but failed with error xyz.“
Also if this is your main router (your nervousness points slightly in that direction), then please get a spare router for learning/practicing. Messing around without clue and being not much interested to research things yourself does not pair well with having a single main router only.
Yes i seen how to change protocol but my modem is not a cable modem. Its LTE modem and once i create qmi interface. It creates wwan-4. So you mean i need to go to edit and switch qmi protocol to static address? Or maybe to create new interface for wwan0 with static address?
- Does your carrier or ISP even offer you static addressing?
- Is the IP you receive even a Public IP
Both circumstances are rare.
(If you are not familiar with the basis of my question, you may wish to research before fruther seeking to set a static IP address on a LTE connection.)
Yes my ISP provide me a static address but after i installed openwrt im receiving puplic dynamic IP address. How to change it to the static address for LTE modem
In picture after i connect to LTE it gives wan4 how i can put the static ip address instead of this?
- First, it doesn't seem you added the interface to a firewall zone
- Second...have you actually tried hitting the Edit button?
If so, I assure that you'll see what you're inquiring about.
I tried hit edit button , u mean on the wan4? Yes i tried but it dosnt edit at all and I can't delete this virtual. Interface or stop it.
I mean your screenshot you showed me (not sure why you're asking about something you didn't show me).
Try again.
Show screenshots.
Ok i wil try 1 moment
